bing tracking image
Q & A Icon

How to Power Supplementary Braking System In Jeep Liberty that Has Battery Disconnect Switch  

Question:

Wiring 4/7 pin connector to tow trailer with brakes. I will installing harness kit into tail light plugs. Liberty also being wired to be towed with tail and brake lights harness kit powered by RV. Installing battery shutoff switch. The kit for tail and brake lights, can it also be plugged in series with Libertys towing plug connector kit harness? If a brake system unit get mounted in front of drivers seat on floor, with battery shut off swich how would you suggest I power the brake unit? Separate fused power port cord extension install between battery and shutoff switch? Alot of issues..... thanks for any assistance,

1

Helpful Expert Reply:

A flat towing wiring harness cannot be plugged in to your Liberty's standard 4-pole trailer wiring harness, the one that you would use to tow a trailer. Flat tow wiring needs to remain separate from the toad's own trailer wiring. A magnetic tow light kit like Hopkins #C6304 makes for quick and easy installation without having to interfere with existing trailer wiring.

For powering a supplementary braking system such as the Blue Ox Patriot # BLU37TR while your toad's battery is shut off for flat towing you can use the Roadmaster 12 Volt Outlet Kit # RM-9332. This wires directly to your toad's battery and provides 20-amp capacity, plenty for the Patriot.

The linked article on flat towing may be of interest to you.

expert reply by:
1
Adam R

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>