2013 Toyota Tundra With Under Dash Port Brake Controller Recommendation
Question:
I have a 2013 Tundra without tow package. I see the brake controller connector under the dash that has the blue brake wire but I dont see it at the back of the truck. Is it stored away somewhere?
asked by: Brett M
Expert Reply:
Since you have the port under your dash all you would need is the # 3040-P harness and the # 37185. You will plug the # 3040-P into the port under your dash except you will cut the blue wire out of the harness and will run it back with 10 gauge wire like part # 10-1-1 to the blue wire of the # 37185.
The # 37185 will plug into the 4-way of your vehicle and the white wire from the # 3040-P will get grounded and you will be good to go.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Article: Trailer Wiring Diagrams
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Seal Rear of RV Tail Light 30-92-001 When Installing on Uneven Trailer Surface
- Q&A: Equal-I-Zer Weight Distribution is Too Stiff; Can Lighter Bars be Used in the Same Head
- Q&A: Troubleshooting Brake Override and Stop/Start Malfunction On 2022 Toyota Highlander Redarc Tow Pro
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Wiring Directions For Bargman LED Recessed Double Tail Light
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps