Recommended Trailer Hitch for 2014 Jeep Wrangler Willys Edition
Question:
I have 2014 Jeep Willy I want to put hitch on. Vehicles you have are Limited and Unlimited. Would my jeep be a limited version?
asked by: Shari
Expert Reply:
The Willys edition can either be a Wrangler or a Wrangler Unlimited, the Unlimited is the 4 door version, the Wrangler being the 2 door model. The Willys package won't have any effect on hitch choices. Any of the hitches that fit the Wrangler Unlimited or the Wrangler models will fit a Willys model.
When it comes to a hitch, I'd recommend the Curt Class III, part # 13432. If you'll be towing with your Jeep, you'll also need the following to complete your towing system:
Trailer wiring harness with 4-pole trailer connector, part # 118416
Ball mount, part # C45010
Pin and Clip # PC3
1-7/8 inch trailer ball, part # 19260
2 inch trailer ball, part # 63845
(the needed ball size should be stamped into the metal of the trailer's coupler.
I've linked you to install videos for the trailer hitch as well as the wiring.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- No Cross Tube
- CURT
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Equalizer Replacement Options for Dexter 13-122 Equalizer
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Q&A: Can 12 Volt Battery Replace Two 6 Volt Batteries
- Q&A: Replacement 12 inch Brake Assemblies for Dexter 36-89 on Trailer
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Q&A: Comparing Curt and Tekonsha Trailer Wiring Harness for 2018 Jeep Wrangler Unlimited
- Q&A: Recommended Tire Clearance Between Tires on Dual Axle Trailer
- Article: How to Rent an RV
- Article: What Exactly is Tongue Weight?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: Electric Brake Controller Installation on Dodge Ram Trucks to 2012
- Article: My Trailer Hitch Doesn't Fit