Will the Draw-Tite Max-Frame Trailer Hitch fit a 2015 Volvo V60 Cross Country
Question:
Do you know if this part will fit the brand new V60 Cross Country? The rear bumper appears slightly different on this model vs the regular V60
asked by: Jason H
Expert Reply:
Thanks for sending a picture! It certainly helps.
Yes, the Draw-Tite Max-Frame trailer hitch receiver # 75916 will fit your 2015 Volvo V60 Cross Country. If you have a 2016 model, it hasn't been tested yet. In order to complete the installation, fascia trimming is required and underbody panel will need to be temporarily removed. Great thing is that no drilling is required.
If you plan on towing, you will need trailer wiring # C56287 but if your model was built prior to the mid year update, you will need to contact your local Volvo dealership for wiring harness information.
The ball mount # C45010 (3/4 inch rise and 2 inch drop) and hitch ball # 63845 (2-inch diameter) would be my recommendations.
The Draw-Tite hitch # 75916 is a Class-III rated hitch and will have a gross trailer weight maximum of 4,000 pounds and tongue weight capacity of 400 pounds. It's always a good idea to double-check your owners manual to confirm the maximum towing and tongue weight capacities.
I added a informative article about installation tips for you too.
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: What Do the Raised End Panel Edges Look Like When Installing a Trailer Hitch on a 2009 Volvo V70
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Differences Between Kuat Sherpa 2.0 and NV 2.0 Bike Racks
- Q&A: Replacement Key For Volvo Roof Cargo Box
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Hidden Trailer Hitch For 2022 Land Rover Range Rover
- Article: Best Bike Racks for Electric Bikes
- Q&A: Removal of Interior Trim Panels and Installation of Trailer Wiring Harness for a 2015 Volvo XC70
- Q&A: Locating Driver's Side Connection For T-One Connector on 2012 Volvo XC70
- Article: My Trailer Hitch Doesn't Fit
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure for Trailer Hitch Drop