Titan Brake assembly 12 x 2 Free Backing for Boat Trailer

Question

Question:

Is this the same brack as the explanation below. If not do you have this titan brake in right and left and what is the price. I need a 12 x 2 free backing brake assembly. TITAN PREMIER™ Marine Brake assembly featuring the Galphorite™ corrosion-resistant finish. Brake comes completely assembled, ready to bolt to the 5-hole trailer axle brake mounting flange.

asked by: LeRoy B

0

Expert Reply:

Painted drum brake assemblies are not usually recommended for use in marine applications.

The Titan Galphorite Free-Backing Hydraulic Trailer Brake Assembly - 12 inch, item # T4489500, right hand and, item # T4489600, left hand are the brakes I would recommend for your boat trailer. These assemblies are complete and ready to bolt on to your trailer brake mounting flange and are galphorite plated to resist the corrosion caused from backing the trailer into the water to launch the boat.

I have included instructions for these brake assemblies below.

expert reply by: Robert G

0

Answer 1

Based on what you listed the correct brake assemblies you'd want is the part #T4489600-500 which is a kit for the left and right hand side assemblies you need. For a actuator the Demco drum actuator part #DM72VR would be a really great option. It…

view full answer...

Answer 2

I can certainly understand not wanting to have to connect 2 five-foot carpeted bunk rails like #CE27820 to get the 10 foot bunks you need. We don't offer them in the 10' length because the shipping costs would be more expensive than the bunks…

view full answer...

Answer 3

The Kodiak Dacromet Disc Brake Conversion Kit, item #K2HR35D, would be a good choice for conversion to disc brakes on your boat trailer. We have not had the opportunity to do a video installation for the disc brake conversion yet, but I will go…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Titan Brake assembly 12 x 2 Free Backing for Boat Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching