Can Reese Friction Sway Control Kit # 83660 Be Installed on Drivers Side of Trailer

Question:

The sway bar is configured for right-hand mount, but it appears the control plate and lever can be reversed for left-hand mount. However, the Reese adapter plate is only set up for right-hand mount. My trailer has its tongue-jack on the right side, interfering with installation. Is there an adapter plate available that will work on the left side? Alternately, can I mount the adapter on the underside of the carrier hitch i.e., upside down, but still with the notch around the hitch?

asked by: Eric G

Helpful Expert Reply:

Thank you for your recent purchases.

The Reese Friction Sway Control Kit # 83660 can be installed on the driver's side of your trailer since its internal friction arm can be removed and reinserted upside down, however the Sway Control Tab # RP26005 cannot be inverted to the bottom side of your ball mount. Instead you'll need to use part # 3442 which is a weld-on part that can be attached to the left side of your ball mount.

Part # D320 shows an example of how such a combination of items will look, but note this example shows the tab welded on the passenger side.

expert reply by: Adam R