Can a Trailer hitch Mount Cargo Carrier be Used at the Back of a 5th Wheel Trailer for Generator

Question:

I want to attach this part # 63153 to the rear of my 5th wheel camper to hold my generator. It has a hitch receiver. My question is Is bouncing a problem?. Thanks

asked by: Hunter M

Expert Reply:

I do have a solution for you but our contacts over at Pro Series have recently told us that the cargo carriers they manufacture, including # 63153, are not rated for use behind a 5th wheel trailer.

Curt has carriers that can be used on the back of a RV like the # C18152.

There is much more movement at the back of your 5th wheel trailer than on a vehicle so you will want to make the carrier as stable as possible using the built-in anti-rattle device. I also strongly recommend using straps like # EM31352 to attach from the back of the trailer to the carrier for even more support.

expert reply by: Michael H

Larry

11/12/2021

Good idea. I have a 2008 F250. I have considered a front receiver hitch. A mechanic friend of mine cautioned about unintentionally restricting Air flow to the radiator during tough uphill towing conditions. I intend to only use this for e bikes. I haven't found a receiver yet that would work on this truck. What do you think?

Les D.

11/16/2021

For your F250 you can use the Draw-Tite # 65049 front hitch. Your mechanic is right about considering how blocking your radiators, headlights or license plate may affect you.

Larry

11/10/2021

Can I attach this carrier to the back of my truck while towing my 5th wheel? It seems like there is room.

Les D.

11/12/2021

I find it impossible to believe this will go on the back of a truck that is towing a 5th wheel. Why not cut out a 24x60 inch piece of cardboard and hold it back there to see how it might fit. For that matter, just start to execute a mild turn, then stop and check your cardboard. Does your trailer have a factory installed accessory receiver in the back? You might be able to put a rack there. Depending on your truck, you might be able to mount a front bumper receiver for bikes. What year/make/model is your truck?