Trailer Hitch and Wiring for a 2015 Toyota Highlander Limited
Question:
How does this clear the exhaust pipe on the limited, which appears to come out further past bumper? How does one access the spare tire when hitch is installed?
asked by: Shelley
Expert Reply:
The exhaust should not come out any further on a 2015 Toyota Highlander Limited more than it does on other trim levels of the Highlander (provided that the vehicle has factory exhaust and not an upgraded exhaust system).
You would access the spare tire in the exact same way with or without the hitch installed. The only difference that you might see is that you would need to tip down the forward part of the spare tire first to get it to clear the hitch at the back. It seems that some people have to do this and others do not due to slight variations in the vehicle manufacturing process.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring you can use # 118449 for models without the factory tow package (no converter present under the dash for trailer wiring). Please note that on 2014 and 2015 models, all of the connections for the wiring harness are at the back of the vehicle. For a model that does have the factory tow package use # 56042.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Size of Factory Bolts For Installation of Curt Trailer Hitch Receiver in Factory Weldnuts
- Q&A: How to Tell if 2019 Toyota Highlander Has Factory Tow Package
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Is the Curt Trailer Hitch Receiver Fascia Trim Diagram Correct for 2022 Ford Bronco Sport
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement 1998 PJ Utility Trailer Hub with QRG 3G and 84000 Stamped Into Hub
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: How To Determine if the 2018 Toyota Highlander Has A Tow Package For Trailer Wiring
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Trailer Wiring Diagrams