Replacement Vent Cover for 1988 Terry Travel Trailer

Question:

Weve got a 1988 Terry Resort travel trailer. Im unsure of the model. Last summer, a tree limb fell on the vent above the toilet and shattered the vent cover. Ive taken photos of the vent hinge to Camping World, but they werent able to match up the hinges with any products that they had. The folks at Camping World said that its possible that the trailer was old enough that they just didnt carry the hinge for this model and year. I need to buy a vent cover for this trailer as camping season approaches but Im unsure which one to get. Can you recommend a part for me to buy? Thanks.

asked by: Trevor S

Expert Reply:

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".

To pick the correct cover, you will also need to know the type of hinge you need.

There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.

Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.

In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof.