Does Curt Class III # C13193 Hitch for 2015 Ford Transit Use Self-Tapping Bolts
Question:
The one reviewer stated his 2015 Transit had blank weld nuts. He had to tap the blanks to install his hitch. Didnt say in the review if he used a traditional tap or self tapping bolts. I also have blank weld nuts i.e. No threads. In one of the answered questions the requestor was assured that the product does indeed come with Self Tapping Bolts, which is great. However, the installation instruction photos seem to show preexisting threaded weld nuts that are being cleaned by a wire brush prior to tapping with the bolts. So the real question is this: will I have to tap the threadless blanks with a traditional tap prior to using the self tapping boltsinch that come with the hitch reciever or will the self tapping bolts suffice? Thanks.
asked by: Kevyn W
Expert Reply:
I've spoken with my representative in the tech services department at Curt Manufacturing. He assures me that the M12 - 1.75 x 30 bolts included with the installation hardware are indeed self-tapping. It's recommended that the blanks be cleaned using the wire brush before and after using the bolt to tap the threads, which is why it's shown in the install photos.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How To Tell If a Ford Transit Has the Tow Package and Parts Needed To Add It
- Q&A: Curt Class III and Class IV Hitch Comparison for 2018 Ford Transit T350 Passenger Van
- Article: How to Choose a Cargo Carrier That Will Clear a Rear Mounted Spare Tire or Bumper
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What Size Wrench Would Be Needed to Install Oil Cap part # RG04-30
- Q&A: What Is The Purpose Of Running A Wire To The Battery For The Curt T-Connector # C56327
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Connecting Wiring Harness to Battery of 2018 Toyota RAV4 Hybrid
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight