How to Install Curt Class I Hitch C11031 on a 2009 Kia Rondo
Question:
I NEED EXACT INSTS FOR INST INCLUDING MUFFLERHEAT SHLD MODS. I AM UNABLE TO DOWNLOAD. 4CYL ENGINE
asked by: brian
Expert Reply:
Installation of hitch # C11031 on your 2009 Kia Rondo would go as follows.
1. Lower exhaust to ease installation.
2. Temporarily remove heat shield. Save heat shield and hardware for reinstallation.
3. Remove tie down hook and return to vehicle owner for reinstallation if hitch is ever removed.
4. Remove fasteners in the frame rails as shown above.
5. Raise hitch into position and install fasteners as shown.
6. Torque all M8 fasteners to 17 ft-lb and M10 fasteners to 36 ft-lb.
7. Reinstall heat shield.
8. Raise exhaust back into position.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Hitch Recommendation for a 2007 Kia Rondo
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch and Related Items for 2009 Kia Rondo V6 Towing Camper Trailer
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch