Suspension Equalizers for 2001 R Vision Trailbay 31BHSS

Question:

I am looking to replace all the suspension components double eye springs, shackles, bolts and equalizers etc on my 2001 Rvison Trailbay 31BHSS double axle with T-52 AL-KO axles at 4400 pounds each. I have not pulled the suspension apart as wanted to have all the necessary parts at the ready to re-install. My question is that the current equalizer seems not to be the same dimensions of the TREQ356. I have attempted to measure the current equalizer and the top bolt to the center line of the bottom two bolts appears to be 2 inches where as the TREQ356 is 2 1/2. There are some numbers on the side of the equalizer 0-C-12-6 but have not been able to cross reference anything to these numbers.

asked by: Michael

Expert Reply:

I'm assuming that your existing equalizer is 6-1/8 inches long, measured center hole to center hole, is this correct?

If this is the case, we don't offer an equalizer that's 6-1/8 by 2, but we can get you really close with part # TREQ104 which is 5-3/4 inch long by 2 inches tall. The 3/8 inch shorter equalizer will slightly change the angle of your shackle links, which will actually allow a bit more suspension articulation.

expert reply by: Mike L