Which Hitch For 2013 Toyota Sienna Provides Most Ground Clearance and the Least Underpanel Trimming
Question:
I have a 2013 Toyota Sienna SE . Sport Edition I want to get a class 3 type hitch. Which of the 3 hitches give the highest ground clearance and also which hitch allows the least amount of underbody cutout removal?
asked by: Jim S
Expert Reply:
The Hidden Hitch Class III, part # 87586 and the Draw-Tite # 75696 are both made by the same parent company and are virtually identical, so they will install in the same manner. When installed, either of these hitches will have approximately 10 inches of ground clearance under the bottom of the receiver tube. The Curt Class III, part # C13105 will have about 9 inches of clearance under the receiver tube.
I'll link you to the instructions and install videos for each of the hitches. As you can see in the instructions, Curt recommends trimming away a 12-1/2 by 2-3/4 piece of the panel. For the Hidden Hitch/Draw-Tite, they recommend trimming away most of the panel or completely removing it and leaving it off.
So, the Hidden Hitch or the Draw-Tite would provide an inch more ground clearance, but the Curt would require less trimming, unless you decided to leave the panel off completely.
If you'll be using the hitch for towing purposes, you might also be interested in the following parts to complete your towing system:
Trailer wiring harness w/ 4-pole trailer connector, part # 118498
Ball mount, part # 2753
1-7/8 inch trailer ball, part # 19260
2 inch trailer ball, part # 63845
Locking hitch pin, part # e98882
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Stainless Steel
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Comparing Curt and etrailer Hitch for 2023 Toyota Sienna
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Dimensions of C-Channel for Enclosed Trailer # 362213-955
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: Tongue Weight Rating of 2016 Toyota Sienna When Using the Draw-Tite Max-Frame # 76112 Trailer Hitch
- Q&A: Recommended Trailer Hitch Receiver For 2013 Toyota Sienna SE
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
- Article: Rust Prevention
- Article: Best Bike Racks for Electric Bikes
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch