Are the Threads of the Shackle Bolts of the Single-Axle Trailer Hanger Kit Fine or Coarse
Question:
Are these fine threads or course?
asked by: Michael L
0
Expert Reply:
The threads of the shackle bolts included with the Single-Axle Trailer Hanger Kit # APS4 are fine and they include the correct matching locknuts.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Continue Researching
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Q&A: How to Connect a Surge Brake Actuator to Activate the Reverse Lockout Function
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Q&A: Can Leaf Spring # e22YR be Used with Square Axle Trailer
- Q&A: How to Determine the Correct Axle Position When Building a Trailer