Looking for Black Plastic or Steel Fender for 13 Inch Wheel
Question:
I have a trailer that has a 13 inch wheel. the Dimensions of the fenders are 7 1/2 - 8inch wide / 28inch 5/8 long / 12inch High. the question is, do you have a black plastic fender or steel fender in this Dimensions. mounting brackets are still in great shape, the old fenders where welded on
asked by: Frank S
Expert Reply:
We have a couple of fenders that would work for you, but they're just a little bit wider than the spec you mentioned (which shouldn't cause any problems.)
The Fulton # F008553 is a black polyethylene fender that measures 9 inches wide, 29-1/4 inches long and 12 inches tall. This is a about 1 inch longer and wider than your existing fender.
The closest match is the CE Smith pre-galvanized fender, part # CE17800G which measures 27-3/8 inches long by 8 inches wide by 11 inches tall.
I've linked to some description videos for the fenders mentioned above.
Products Referenced in This Question
CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 13" Wheels - Qty 1
- Trailer Fenders
- No Step
- 13 Inch Wheels
- 8 Inch Wide
- 28 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Single-Axle Trailers
- Silver
- CE Smith
more information >
Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 13" Wheels - Qty 1
- Trailer Fenders
- Top Step
- 13 Inch Wheels
- 9 Inch Wide
- 30 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- Fulton
more information >
Product Page this Question was Asked From
Fulton Single Axle Trailer Fender with Top Step - Silver Plastic - 13" Wheels - Qty 1
- Trailer Fenders
- Top Step
- 13 Inch Wheels
- 9 Inch Wide
- 30 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Silver
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Where to Position the Trailer Axle?
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: How to Clean a 7-Way Trailer Wiring Connector
- Q&A: Direct Replacement for Titan 225S Brake Caliper
- Q&A: Parts Needed To Build Fold Down Single Bed On Horse trailer
- Q&A: Need New Tires for a Trailer Hauling 2,500 to 2,800 lbs with 4.80 x 12 Tires
- Q&A: Are E-Z Lube Grease Zerks Threaded or Pressed In
- Q&A: Can a Trailer Axle be Converted to an EZ Lube Axle by Replacing Spindles
- Q&A: Could/Should Zerk Fitting of EZ Lube Spindle Be Removed to Install Bearing Buddies
- Article: Best Boat Accessories