Options to Lift a 2003 Keystone Fifth Wheel Trailer
Question:
I have a 2003 keystone 5th wheel. I would like to lift this or move the axl under the spring.. Ca you tell me what options I have
asked by: Keri K
Expert Reply:
One option you have would be to move your axles to below the leaf springs. This is the most common way to lift a fifth wheel trailer to allow the trailer to be towed level if the hitch and pin box adjustments are maxed out.
The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.
![Chris O](https://images.etrailer.com/static/images/catg/people/632_tn.jpg)
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Redline
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Q&A: Distance Between Axles When Using Dexter Equalizer Kit # K71-359-00
- Q&A: Installing Dexter Heavy-Duty Suspension Kit # K71-359-00 on Trailer with 34" Axle Spacing
- Q&A: Lining Up Grease Hole Access for Wet Bolts of Trailer Hanger Kit Kit K71-359-000
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Recommended Hanger Spacing for 24-7/8 Inch Long Leaf Spring with APT4 or APT3HD Hanger Kit
- Q&A: Leaf Spring Bushings For Tandem-Axle Hanger Kit # APT8
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: AL/KO 5200 lb Axle Replacement
- Q&A: Installation of Hanger Brackets and Springs for Tandem Trailer Axles
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs