What Trailer Dimensions would the Dexter Trailer Axles # 20545I-EZ-72-15 Fit
Question:
what type of trailer would this axle fit?
asked by: Michael R
Expert Reply:
The Dexter Trailer Axles # 20545I-EZ-72-15 that you referenced will fit a trailer that has the following dimensions.
The axle it replaces will need to have a hub face to hub face dimension of 72 inches, you will need to measure the distance between the spring centers of the trailer, if that dimension is 58 inches it will connect to your suspension system.
The wheel bolt pattern of your wheels will need to be 5 on 4-1/2 inch, and the capacity of this axle is 2,000 lbs.
I attached a review video for this axle for you to check out as well.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Axle Replacement For Tracker Trailstar Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Leaf Springs For A Dexter 2,200 lb Axle
- Q&A: Leaf Spring and Hanger Kit Recommendation for 7k Triple Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Selecting Bearing Buddy Grease Cap Covers for 2-Inch Diameter Bearing Buddy
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure a Trailer Axle