How to Convert a 4-pin Flat to a 7-way Plug and Install a Brake Controller on a 2003 Ford Ranger FX4
Question:
Hi I have a 2003 ford ranger FX4, 4.0 V6. Standard it has the 4 pin flat connector for trailers. I was wondering is their anyway to convert this to a 7 way connector? I am considering buying a small travel trailer. Also can a electronic brake controller be installed? thank you
asked by: Jeff
Expert Reply:
I recommend using brake controller installation kit # ETBC7 to adapt your 4-pin flat plug to a 7-way connector. This will adapt your 4-way plug to a 7-way, and it will include the circuit breakers, additional wire, and various connectors to install the brake controller and adapter on your 2003 Ford Ranger.
I recommend the Prodigy brake controller # 90885 to equip your vehicle for towing with electric brakes. The # 90885 brake controller includes a pigtail that will allow you to hardwire the brake controller directly to your vehicle.
The 4 brake controller wire functions are:
White: Ground, attached to a clean piece of unpainted metal.
Black: 12v lead, attached to the vehicle's positive battery terminal with a 40amp circuit breaker.
Blue: Electric brakes, attached to the blue electric brake wire on the 6 or 7-way plug.
Red: Stoplight switch, normally located directly off the vehicle's brake pedal.
I have included a link to a video demonstrating how the # ETBC7 kit and # 90885 brake controller would be installed on a similar vehicle, as well as some information on installing a brake controller starting from scratch.
Products Referenced in This Question
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: How do I Tell if the Brake Controller is Bad
- Q&A: How Is Spring Bar Tension Set Up with Trailer Weight Distribution System