How to Install a Weight Distribution System on a V-Nose Trailer
Question:
Will this system work with a 5 Ft. V-Nose trailer? Thanks
asked by: Robert
Expert Reply:
Yes, there is a way to use the Strait-Line Weight Distribution System part # RP66074 on a V-nose trailer like yours. You will need to use the Chain Hangers # RP58305. These will bolt to the sides of your trailer frame and do not require clearance above the frame like standard hangers do so they will work well on your V-nose trailer.
I attached a review video for the WD system and an FAQ article on WD systems for you to check out as well.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well.
Products Referenced in This Question
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Installing a Brake Controller in 2014 Dodge Ram Pickup
- Q&A: Does The Curt True Course Allow The User To Adjust Its Sensitivity?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: 2-5/16 Inch Ball for Reese SC Weight Distribution System # RP66131
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: Trailer Hitch Ball Wrench Size and Torque Rating for 1-1/4 Inch Hitch Ball Shank Size
- Q&A: Can the Curt True Course Sway Controller Be Used With the New StabiliTrak Electronic Sway Control