Powerbuilt Heavy Duty Rolling Seat with Organizer

Video Transcript for Powerbuilt Heavy Duty Rolling Seat with Organizer Review

Adam: What's going on, everybody Adam here with the etrailer.com. And today, we're going to be taking a look at the Powerbuilt heavy duty chair and organizer. What this is going to be great for is just some of those garage jobs that you may have, whether you're working in your garage, someone else's or even on your driveway, it's just going to make the job a lot easier. I always say just save your knees and work smarter, not harder, and this is definitely going to make even some of the more nitty gritty jobs just a little bit easier because you're pretty comfy. I'm going to be able to have all of my tools on both sides and also another third one in the middle. And of course, we can have some of our beverages too in these cup holders.

So, what we're going to do is just go over all the instances and features that are going to be great for those jobs that you guys may be doing in your garage or driveway.So, the first thing I noticed when sitting on this for the first time is the fact that we have rubber wheels. I have a couple of crawlers at home or other seats and they have plastic wheels. With the rubber wheels, first of all, it's a lot quieter and it's a lot smoother as well, but that, I think, is going to be my deciding factor depending on what I plan on doing. If you guys plan on going in your garage and it's not always super smooth or even out on your driveway, I do think over time, those little tiny rocks and stuff are going to chip away at the plastic wheels. With the rubber ones, I don't think we'll have that issue at all.

Also, I did notice that the bearings on these wheels are extremely good. You just keep rolling. That is another pet peeve of mine. I'd rather just have more rolly 00:01:45 wheels than not, so that's definitely a plus there.Also, they do swivel 360 degrees, so it's going to make maneuvering extremely easy and you can make all those maneuvers just to get into that right spot whenever you're doing whatever job. I just do think that it will benefit in the long run.

Also, if you really need to, there are a lock on two of them, so it's not going to prevent it from obviously spinning like that, but it is going to lock down the bearing on the wheel itself and that is going to stop you from rolling at all, and this is just one being locked. When I have both of them being locked, it's pretty much stationary.And the diameter of all the wheels are going to be about four inches, so that's a pretty big wheel. So, I do think that these will last a little bit longer than some of your smaller ones just because one rotation of this, it's going to be a little bit more space than, obviously, one rotation of a smaller wheel. So, every section of this rubber is going to see a little bit less ground than the smaller wheels, but let's go ahead and move up a little bit. Another big pet peeve of mine is having enough space to put my stuff.

One big thing is just the different amount of cans that I have. They're all different diameters. So, we're going to have one on the left that's going to be big. It's going to be great for your larger type cans, whether it's paint cans, lubrication or penetrating oil, something like that.And also on the other side, we're going to have that bigger shape, but down low, it's going to be a little bit smaller. So, it is going to be able to fit a little small water bottle like that or just any basic can of soda pop that you guys may be using. I know it always just have something to drink when I'm there. Luckily, we could fit it pretty easily, and I don't think it's going to tilt or tip either. I do have a big tall can and even if I keep knocking it, it's not going to fall out. So, I think that's a plus.Just the way I'm setting this up, I have my measuring tape on the little slot here, kind of slides in. And we are going to have seven different holes, two up here and five back here. So, you'll be able to get everything you really need. I just have three different assortment and sizes of a Phillips-head screwdriver, so I can fit that in there. You can get plenty in there, and I do think we'll be able to fit everything you really need for any job, really. On both sides, we are going to have a little thing for our pliers. I really like that because they're not going anywhere and I know exactly where they are because I do use these quite often.And it is going to be exactly the same on both sides. So, I'm going to spin around for you. So, this side's going to be the same exact thing. And the cool thing about this is just the fact that it's removable, definitely something I like and it's not super hard to put back in. Some of them are removable. I have one at home, but you have to undo a screw. This is tools free. All you got to do just kind of place it into the spot and it's just going to hug around that bar. But I always like to just get to wherever I'm going to be doing most of my work, grab everything, get all the tools that I need and then place it down.You are going to have about five different slots here as well for whatever you think. I usually just use one of them for tape. I can use another one for tape just because this is broken on my measuring tape. Just trow that in there if you need and maybe some zip ties. Literally, you guys just make it yours. I'm just letting you know how much we could fit on both sides. That's definitely something I like. It is relatively easy to kind of snap back into place, and I would definitely use it. To be honest, to give you guys my two cents about it, I would use it so far, but there's a couple more features. Let's go over.So, for our third and final drawer, it's going to be accessible from one side, not from the other, which honestly, I kind of like that just because whenever I go ahead and pull myself out, I can just shove it in and it's not going to fall off the other side. I'm going to let you know what I usually keep in here, safety glasses because I just know I'm going to use those on most of my jobs. Gloves, of course, most of my jobs. And of course, some lights. I usually use the middle one just for the stuff I know I'm going to be using throughout all the different jobs I'm going to be doing just because I usually use the side trays for a specific job. I take them up, go over to my big old toolbox, load it up with what I need, put it back and then now I don't have to grab any of these whenever I'm working.Another thing I thought of is, honestly, this is probably going to be ideal if you do side work for other kinds of people. You could just go maybe into your garage, go to your huge really heavy toolbox. You're not going to bring that everywhere with you. With this, you can just go ahead and just pull the tray out, load up the tools you need from your toolbox, put it in here, put this in your vehicle, lock the wheels, drive to the place and you have everything you need. I definitely think that's what I would do with it. Just wanted to relay that for you guys, but honestly, the only thing left we have to talk about is the top here.It is going to be an injected molded plastic, extremely hard and sturdy, so you don't have to worry about it wearing away like some of those vinyl cushion seats. Yes, it's not near as comfortable as cushioned seats, but almost all of mine start crackling over time and they really don't put up with some of the fluids that the vehicle usually has. Brake fluid, it'll eat right through that finish on the leather one that I have. We're not going to have that issue with. This one does have a grippy surface and it's not completely flat either. It does kind of contour, kind of like a half moon-ish. Also, it is going to have about a 300 pound weight capacity, so don't worry about overdoing it.So, if you guys are like me and do a lot of work in your garage or out on the driveway, having something like this is definitely going to make the jobs easier. I always just find that whenever I'm more comfortable in a situation where I'm working on something, I just end up staying there a little bit longer, taking that extra time to make sure the job's done right. And with this way, I can have all my tools with me, so I'm not getting up, walking my toolbox, coming back. I can have everything I need just underneath my seat. So, I would definitely give it a thumbs up. So, that's pretty much all you really need to know about the Powerbuilt seat with the organizer. And again, I'm Adam with etrailer.com.