Bulldog Winch Cover/Holder for Wireless Controller Part no. 20156

Video Transcript for Review of Bulldog Winch Replacement Parts - Remote Cover and Holder - BDW20194

Today we'll be taking a look at the Bulldog Winch holder cover for wireless controller Part Number 20156. This is just going to be a little neoprene pocket to fit your controller into and keep it protected. It as some hook material on the back that will match up to the loop material that it comes with so that you have a nice, easy place to mount that up to. It has some adhesive on the back of that loop material so you can peel off the backing and attach it wherever you want that holder to be placed.Whenever you do that you just want to make sure that you clean off the area really well. If you use a little rubbing alcohol on there or any other kind of cleaner. Hold it in place and make sure it gets a good, firm grip.

It has a hook and loop closure over the top to keep our remote in place or our wireless controller. It is water-resistant so even if we are in a light shower or anything like that, it should keep our controller protected.This measures about 3 inches wide by about 5-1/2 inches tall. And when flat, it's about 1/2 inch thick. If you need to pick up a replacement for the wireless controller itself, we also have that available here at eTrailer.com. That Part Number is DBW20156.

That's going to do it for our look at the Bulldog Winch cover holder for wireless controller.