Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 part number: Y00426
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Black powder coat finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 part number: Y06183
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 4 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006183 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06183
Average Customer Rating: 4.8 out of 5 stars (1471 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Frank02/10/2023
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.1515956
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: Anthony11/29/2020
I have a 10th gen Civic sedan and I was dying to get the perfect roof rack set for my car. At the time of my purchase there was not many visuals of what the rack system looked like on this car.
Overall I love how it looks on my car! During This COVID pandemic I have been camping more, and this is the perfect foundation! First off, the 46in fairing is the perfect fit for the 10th gen civic! Wind noise is low also with the help of the aerodynamic crossbars. My main concern was the fuel efficiency. On long road trips I still average 38-40 mpg with the rack on. My daily commutes I average 34 mpg without Econ on.917357
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!549914
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!1218031
Follow the instructions, and you can't go wrong on the self installation1757391
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak. 427427
product was just what I needed The folks at etrailer were extremely helpufl!!1697363
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: DogDoc04/12/2024
2024 Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.1765846
by: Ryan. K05/25/2020
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install. 803293
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.1139343
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down. 589149
by: Daryl04/29/2020
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.789770
by: Robert 01/06/2022
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.1238568
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.1678878
by: Roland01/08/2024
Well packaged and on time 1708575
by: Ryan09/07/2022
Quiet crossbars that look good and do not howl at highway speeds.1397047
by: SJHughes12/23/2017
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.462341
The absolute best roof rack setup for transporting the TopWater Rooftop Fishing Rod Carrier # Y04088 and the LoadWarrior Cargo Basket # Y07070-74 on your 2017 Ford Expedition EL comes from Yakima. You can use their 60" JetStream Crossbars # Y00426, with the TimberLine Towers # Y33TR.
The TopWater is 18" wide while the LoadWarrior is 39" wide so this gives you 3" to spare.
I have attached an installation video of this setup on a 2019 Expedition that you can check out. view full answer...
The best set up for a rooftop tent would be the Yakima JetStream roof rack system because it's easy to use, reliable, and has a weight capacity of 165 lbs. To connect this to the raised rails on your 2021 Subaru Ascent you need the 60" JetStream Crossbars # Y00426 along with the TimberLine Towers # Y33TR.
To add locks to the TimberLine Towers you can do so with the kit # Y07204. This will help prevent a passerby from being able to remove the roof rack easily. view full answer...
I would be happy to! To attach a roof rack to the raised rails on your 2024 Toyota Sequoia you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR
view full answer...
I would be happy to! To attach a roof rack to the raised rails of your 2024 Kia Telluride, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
A great perk of view full answer...
The roof rack I recommend for you is the Yakima JetStream Roof Rack with 60 Inch Long JetStream Bars # Y00426, BaseLine Towers # Y28TR, Fit Kit # Y06125 for the front bar, and Fit Kit # Y06143 for the rear bar. The JetStream crossbars feature an aerodynamic shape to help minimalize wind noise and keep the ride quieter than racks that use more traditional round or square crossbars. This rack is designed to fit your Civic coupe and will mount in the door well for both the front and rear crossbars. view full answer...
Yakima has their Jetstream roof rack for your 2018 Ford F-150 Supercrew with the part numbers # Y00426, # Y28TR, and # Y06122 which I attached an install picture of on a truck with a panoramic roof just like yours. view full answer...
The Yakima Roof Rack Kit for a 2020 Jeep Grand Cherokee that uses parts # Y00426, # Y28TR and # Y06121 is a great choice and I don't think you can ever go wrong with Yakima products; they're durable and easy to install. The Baseline Towers # Y28TR and landing pads # Y06121 will clamp onto your flush mounted rails easily, like the dealer mentioned. This rack has 60" Jetstream bars that are aerodynamic and will provide you with a ton of useable bar space, so it's just a great all around roof view full answer...
I don't see why that would be an issue as long as you install a roof rack confirmed to fit your 2020 Toyota Highlander like the Yakima Jetstream part # Y00426, # Y28TR, # Y06153, and # Y06132 which gives you a very high quality and aerodynamic rack that would work great with a kayak carrier like the JayLow part # Y04073. view full answer...
The side rails would have come from the vehicle manufacturer. We do not have roof rack kits that will include side rails. However, you can still get a roof rack for your 2019 Chevrolet Traverse, even without rails.
You can use the 2019 Chevrolet Traverse Roof Rack by Yakima which consist of:
- Yakima JetStream Crossbars # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima # Y06153 (x2) view full answer...
Yes the Yakima Jetstream roof rack part numbers # Y00426, # Y28TR, and # Y06110 is a confirmed fit for your 2020 Chevy Silverado 1500 crew cab new body style! view full answer...
Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174
BaseClip Fit Kit for Yakima BaseLine view full answer...
Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
This aero bar roof rack system has a 165 lbs capacity. view full answer...
It truly depends on the roof style you have. The only Yakima JetStream system that works is if you have raised factory rails on your 2011 Honda Pilot. If you have raised rails, you can use the following setup with a tent:
- Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426
- TimberLine Towers # Y33TR
- Yakima Same-Key Lock Cores # Y07204
Since these crossbars attach directly to your raised rails, they are perfect for mounting a roof top tent. With this crossbar view full answer...
Rhino Rack has a roof rack that is a fit for your 2021 Jeep Grand Cherokee that has the matte black roof rails that run front to back with the part numbers # RRVA137B-2, # RRRLKVA, and # DK234. This is one of the nicest and quietest roof racks out there so it will work really well for you. view full answer...
For your 2005 Jeep Grand Cherokee using the Yakima JetStream Crossbars # Y00426 and the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR I recommend going with the Malone MegaWing Fishing Kayak Roof Rack w/ Tie-Downs # MPG207.
Reason being, the MegaWing has a larger weight capacity at 150-lbs compared to the 75-lbs max of the SeaWing # MPG107MD, is only a half a pound heavier, and has a longer load strap at 15' compared to the SeaWing's 11' straps.
The positioning view full answer...
I recommend going with the Yakima JetStream roof rack system for your 2019 Ford Expedition because the JetStream bars are more versatile than other crossbars and they don't require any modification to the rubber strip when using accessories.
The parts that you need to install this system on your 2019 Expedition are the 60" JetStream Bars # Y00426 , and the TimberLine Towers # Y33TR. These easily install on the OEM raised rails of your Expedition and can be locked for security with the view full answer...
I recommend going with the JetStream roof rack for your 2019 Hyundai Elantra because it gives you lightweight aluminum crossbars that feature rubber strips that you don't have to cut when mounting accessories.
This roof rack consists of the 60" JetStream bars # Y00426, along with the BaseLine Towers # Y28TR, and the BaseClip Fit Kits # Y06160 and # Y06167. To add locks to this system you can use the SKS Lock Core Kit # Y07204.
If you don't already have a roof mount bike rack then view full answer...
We have the perfect roof rack for you to put on your 2019 Ford Focus hatchback which uses JetStream crossbars from Yakima. This rack is composed of:
- JetStream Crossbars # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06135
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06105
The aerodynamic shape of the JetStream bars, along with their built-in WindRidges, is what ensures that this roof rack minimizes view full answer...
You will need both the BaseClip Fit Kit # Y06125 and the BaseClip Fit Kit # Y06165 for your 2020 Kia Telluride.
The BaseClip Fit Kit # Y06125 are for the front of the Telluride.
The BaseClip Fit Kit # Y06165 are for the rear of the Telluride.
You then also need the Yakima JetStream Crossbars # Y00426 and the BaseLine Towers # Y28TR to complete the roof rack. You can add the Yakima Same Key System (SKS) Lock Cores # Y07204 to lock the rack to your roof. view full answer...
Two sets of Hullavators # TH898 require at least 57" of bar space and a high weight capacity for roof rack weight plus kayak weight plus 80 lbs of Hullavator weight. So, yes, they will fit on 60" cross bars.
The Thule Roof Rack that fits your car consists of 53" Thule Wingbar Evo Crossbars # TH711420 and Thule Evo Raised Feet # TH710401. Unfortunately, that does not fit two sets of Hullavators and I do not recommend using larger bars since Thule specifically adapts the selected load view full answer...
I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier view full answer...
You should not have any problems with the roof on your 2019 Toyota Highlander. When Yakima redesigned their towers for naked roofs they add two additional adjustments, toe and pitch. A Yakima rack on a 2019 or a 2020 Toyota Highlander will have front tower pitch measurement of 6º and the rear tower pitch measurement of -6º. This is done precisely for the slope in the roof of the Toyota Highlander. I have included a picture of the pitch diagram from Yakima's installation manual below.
Your view full answer...
Yakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet.
If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima view full answer...
Yakima Baseline Towers # Y28TR comes with a total of 4 towers.
If you are looking for a complete crossbar system that includes the Yakima Baseline towers, I would be happy to assist you if you confirm your year/make/model of vehicle.
view full answer...
The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great.
I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof view full answer...
I have a solution for you to install Yakima round crossbars on your 2013 Mazda CX-3 however, there are no Q Clips or Q Towers designed to fit.
Instead you will want to use the BaseLine Towers # Y28TR with the RoundBar Adapters # Y03536. Then for the fit kit you'll use the BaseClips # Y06130 and # Y06132. Two of each BaseClip is needed.
Yakima recommends 48 inch Round Crossbars # Y00408 for the CX-3. view full answer...
While we do have a roof rack that fits your 2019 Hyundai Santa Fe, unfortunately Thule only has a fit if your Santa Fe has the rails so instead I recommend using the Yakima JetStream setup which is the same quality as the WingBar Evo crossbars from Thule. Here are the parts you'll need:
- Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06151
- (Optional view full answer...
We have several roof racks confirmed to fit your 2004 Honda Civic coupe, but there are no Rhino Rack roof racks among them.
I have included a link to all the roof racks confirmed to fit your vehicle. You can then filter them by bar type, brand, color, etc.
I recommend going with the Yakima Round Crossbars Roof Rack which includes the following parts:
48 inch CrossBars # Y00408
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
Fit Kits # Y06162 and # Y06159
Check out the view full answer...
I can help you get a roof rack system and bike rack for your 2015 Mazda CX-5.
The Yakima rack that I would recommend for you is made up of the following parts:
# Y00422 - 60 inch Corebar Crossbars
# Y28TR - BaseLine Towers
# Y06130 - BaseClip fit kit
# Y06132 - BaseClip fit kit
Since your roof is a naked style you will need the use of the fit kit clamps featured in the above listed setup.
One of the reasons Yakima may have been unclear about if the Qtower would work or not is view full answer...
On your 2013 Nissan Rogue, there are only two Yakima towers confirmed to fit. The baseline towers # Y28TR are for the models without existing rails or crossbars. They will require the BaseClip Fit Kit # Y06123 and # Y06135. These towers will work with a variety of rails. The other towers are for the raised factory rails and don't require any clips, so you must have the baseline towers. The # Y06135 are for the rear crossbar towers and the # Y06123 is for the front crossbar towers. view full answer...
I have a couple of options for roof racks depending on whether or not your 2022 Kia Telluride has the flush mounted rails that run front to back.
If your Kia has the flush mounted rails that run front to back you will want the 2022 Kia Telluride Roof Rack by Rhino Rack. The Roof Rack Includes:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 item # RR94DY
If view full answer...
I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired.
If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the view full answer...
Aside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta.
Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier. view full answer...
In order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
view full answer...
The Yakima roof rack you looked at, consisting of the JetStream # Y00426 60 inch crossbars, # Y28TR BaseLine Towers, # Y06102 and # Y06139 clip kits is compatible with your 2016 Ford Edge with the glass roof, according to Yakima. The feet will sit on the painted portion of the roof, not the glass so this is perfectly safe to use.
If you let me know what you're needing to use the roof rack for I can make some recommendations for you! view full answer...
Yakima recently discontinued their Q-Tower roof racks which means their Q clips are gone as well. You would need the Q7 clips part number 8000607 but they are not available anymore. We do have a solution that would allow you to still use the round bars you have though. For that you'd want the part numbers # Y28TR, # Y03536, and # Y06122 since you already have the round bars like part # Y00410. view full answer...
Yakima does have a JetStream roof rack confirmed as a fit for your 2019 Kia Sorento with a naked roof with the part numbers # Y00425, # Y28TR, # Y06159, # Y06170. The Jetstream bars are really nice as they are aero shaped and have a channel that runs down the top of it for roof accessories that have channel attachment options. view full answer...
There is a solution for you that will allow you to still use Yakima round bars, if you have them. Unfortunately, since the Q-Towers have been discontinued and the new system is not backwards compatible, you will need new towers, a fit kit, and round bar adapters. This is what you need for your 2017 Chevrolet Colorado.
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part view full answer...
The Yakima BaseLine towers part # Y28TR are a fit for your 2019 Kia Sorento but to install them to the roof of your vehicle requires the fit clip kits part numbers # Y06159 and # Y06170 which are what specifically were custom made to fit the roof of your vehicle. Then for a set of Jetstream crossbars you'd want the part # Y00425 and you'd be set. view full answer...
I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable.
To replace the roof rack for your vehicle, you'll need:
- Yakima BaseLine Towers, part # Y28TR
- RoundBar SL Adapter for Yakima Towers, part # Y03536
- BaseClip Fit Kit for Baseline Roof Rack, part # Y06145
- BaseClip Fit Kit for Baseline Roof Rack, part # Y06153
Note that you'll view full answer...
To add a set of crossbars, that don't extend past the legs, to your 2024 Chevy Trailerblazer, I recommend the roof rack by Yakima which includes the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y89UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06183
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06187
This aero bar roof rack system has a 165 lbs capacity. I recommend view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.