2023 Toyota Sienna Roof Rack by Yakima
Roof Rack Includes:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4
Part Numbers: Y00425,Y33TR
Retail:$545.00
Our Price: $436.00
You Save: $109.00
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2
part number: Y00425
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Specs:
- Quantity: 2 crossbars
- Crossbar weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 50" long x 2-3/4" wide x 1-1/8" tall
- T-slot dimensions: 7/8" wide x 7/16" tall
- T-slot top opening: 7/16"
- Underbar slot: Full length
- Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4
part number: Y33TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle's raised, factory side rails. Towers attach with rubber-coated stainless steel straps and tighten with the include torque tool.
Features:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with raised, factory side rails
- Pair with 2 Yakima crossbars to create a complete roof rack
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Safe and easy installation with rubber-coated stainless steel straps
- Straps wrap completely around raised side rails for maximum security
- Included torque tool clicks 3 times when straps are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
Specs:
- Maximum tower load capacity: 220 lbs
- Limited lifetime warranty
The heavy-duty TimberLine towers allow you to mount 2 Yakima to your vehicle with raised, factory side rails. The towers install with rubber-coated stainless steel straps that wrap around your side rails. And the TimberLines' versatile BarBeds accommodate Yakima's full line of crossbars.
Versatile BarBed
The TimberLine's BarBed is designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
Secure Installation with Rubber-Coated Stainless Steel Straps
The towers install easily with rubber-coated stainless steel straps. Simply remove the tower covers, wrap the straps around your raised side rails, and secure the straps to the towers. The straps provide maximum contact and security by wrapping completely around your side rails.
Tighten the bolts inside the towers with the included torque tool to complete installation. This is the only tool you will need to secure the towers to your rails and your crossbars to the towers. The torque tool also helps prevent over- or under-tightening. The tool clicks 3 times once you've reached the correct amount of torque.
Same Key System Locks
TimberLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000164 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000147
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 - Y00425
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 - Y33TR
Average Customer Rating: 4.9 out of 5 stars (588 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle's raised, factory side rails. Towers attach with rubber-coated stainless steel straps and tighten with the include torque tool.by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: SueCanoe02/10/2023
They do the job. I can't say that they look like they were custom-made for my new vehicle, but I trust them to stay on and keep my boat on the car. They hold securely.
by: Hurtlocker08/11/2023
Really Easy to Install! Solid and Strong amount to Roof Rack.
by: John11/16/2023
2015 Mazda 3
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: Vannack01/04/2020
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Eric 05/13/2024
Subaru Forester
Fit our Subaru Forester perfectly. Install was a breeze.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Oliver05/30/2021
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.
by: Angela04/08/2021
Very happy with our purchase. I love how easily you can remove the entire rack easily. Too bad the locking mechanism comes separately but we are still happy with what we received.
by: Alexander12/11/2017
Jeep Cherokee
Super solid rack and the only one that fits the Jeep Cherokee without rails well and looks good too. Easy to install and worth the price
by: Joshua09/05/2019
Amazing quality easy set up fast shipping buy the locks the 4 pack With this fast shipping super impressed
by: Stephen07/07/2020
2019 Hyundai Santa Fe
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: Jacob08/01/2021
Really well made, great fitment, a little complicated instructions, but perfect install when they’re followed closely.
by: Barry09/29/2022
the product was exceptional. I would recommend it to anyone, who has a vehicle with a naked roof. It is a solid as a factory installed rack. Josh went out of his way to get me a replacement torque screw driver because the first one from Yakima was working properly.
by: Ernesto07/23/2022
Well you asked for it so;
I ordered this as part of my roof rack for a 2021 Nissan rogue. The complete roof rack set was unavailable le as one bracket was on back order and said would ship in under a month so I ordered everything else in the meantime. Little did I know it would take a over a year to get one stupid bracket and yes, I'm still waiting. I can't even return the items I bought because it's way past the 90 day policy even though they're brand new still in the box collecting dust. etrailer, this has been the worst experience I've had yet with you guys. Oh still waiting for my one bracket to complete my roof rack
by: Aidan08/19/2023
Great bars and easy installation on my 2012 Prius C
by: Roger03/24/2020
robert s was terrific !!! excellent customer service !!! from assisting with a return, to recommending an alternative, to informing me about delivery status ...
the yakima jetstream crossbars with baseline towers were a bit more complicated to assemble and install than the brand i returned, but the wind noise and whistling are dramatically less ...
the next step is to select a cargo carrier ... it goes without saying that i will consult robert again ... thanks so much robert, and safe and happy travels to all
by: JB02/13/2022
2020 Kia Sorento
The rack system seems very good, but time will tell, of course. The installation is difficult and time consuming. I purchased the system needed from etrailer website with guaranteed to fit pieces. I would call myself a very experienced do-it-yourselfer. I followed directions slowly, carefully, and exactly, yet there were problems. The video for installation given for my exact order did not match the printed and actual assembly and installation directions. The baseclips that were guaranteed for my model vehicle were actually for a different model vehicle according to the enclosed sheet ... however they did work anyway but caused some "looking up" and some confusion during assembly. I was careful to assemble exactly to measurements given ... and once that is all done and tightened and "sealed up" you put them on the roof, only to find that they could have been spaced a bit wider for a perfect fit. They are fine enough and we'll see if they stay tight to the vehicle. If not will need to take it all apart and widen the spacing.
It is excellent that basically only one tool that is provided with the racks is needed. And also that each part must "click" when properly tightened. That adds reassurance and satisfaction while assembling.
There are so many models of vehicles and it is not easy to figure all this out. etrailer has a very helpful website, response, and videos to help ... but my review is to emphasize that the instructions are not perfect. One needs lots of patience, common sense, and perhaps re-assembly for a perfect outcome.
by: Karen H07/08/2019
The Yakima JetStream Crossbars minimize wind noise and provide full, yet sleek support to every roof top load demanded of it.
by: Paul 07/15/2023
An Excellent Roof Rack!
by: Jenny05/26/2020
Volkswagen Golf
Relatively easy to install on my VW Golf (etrailer videos are very helpful) and sooooo useful with my Yakima skybox. Not much road noise, so I can leave the rack on even when I am not using it.
25
391
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- How to Carry Bikes on a 2018 Volkswagen Golf Alltrack with a Sunroof
- Using the JetStream Crossbars # Y00425 along with the TimberLine Towers # Y33TR will be taller than using the Yakima RailBar Crossbars # Y00432-0433 for your 2018 Volkswagen Golf Alltrack but you do need to note that every roof rack manufacturer states that a sun or moon roof should not be used with a roof rack installed.
Roof racks do have some wind noise which the aero style bars, although cause less noise, are not immune from. There is also the issue of clearance as well as possible
view full answer... - Roof Rack Recommendation for Raised Rails on a 2011 BMW 3 Series
- I have a way for you to use longer crossbars for a roof rack on your 2011 BMW 3 Series but since the Thule crossbars have a limiting slot on the underside we need to use a different brand roof rack system and for that I recommend Yakima as they're the only ones with a slot all the way through so you can literally fit any crossbar length.
I'm only seeing from all of our manufacturers that a 2011 BMW 3 Series has raised rails so for that Yakima recommends the following parts (if you have
view full answer... - Recommended Roof Rack Setup For Carrying A Tent On A 2013 Subaru Outback Wagon
- Yes, I would be happy to assist you and I know exactly what you need. The most economical setup that will also work for your vehicle is the Malone AirFlow 2 Aero Crossbars 58" # MPG216. This kit comes with everything you need and has a weight capacity of 165lbs. These bars also come with built-in locks.
view full answer... - Recommended Roof Rack For 2015 Nissan Altima With A Sunroof
- We do have a roof rack that's designed to fit your 2015 Altima and also work with your sunroof.
I recommend the Yakima Jetstream roof rack. This rack is extremely quiet because it uses aerodynamic crossbars. The crossbars are 50 inches long and constructed of lightweight aluminum and have a black powder-coat finish. It is recommended not to open the sunroof when the roof rack is installed due to interference.
To order this roof rack you will need part # Y00425, part # Y28TR, part
view full answer... - Cross Bar Options And Kayak Carrier For A 2022 Hyundai Sonata
- We do have a couple of cross bar options for your 2022 Hyundai Sonata that will work great for you.
-First we have the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, the fit kit # Y06180 & # Y06153.
These are aerodynamic cross bars that measure 50" long, and have a maximum weight capacity of 165lbs.
-Next, we have the Yakima CoreBar Crossbars # Y00421, with the same towers # Y00146, and fit kits # Y06153 & # Y06180.
These cross bars
view full answer... - Quiet Roof Rack for 2023 Kia Sorento With Flush Rails
- For an extremely quiet roof rack that fits the flush mounted rails on your 2023 Kia Sorento I recommend the Yakima JetStream roof rack. You will need the following:
-Yakima JetStream Crossbars # Y00425
-SightLine Towers for Yakima Crossbars # Y64AR
-SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y77UR
The JetStream bars use an asymmetrical shape making them very aerodynamic. This combined with the WindRidges built into the bars results in a dramatic
view full answer... - Parts Needed for Yakima JetStream Roof Rack on 2024 Mazda CX-5 With Flush Rails
- We have exactly what you need to install the Yakima JetStream roof rack on your 2024 CX-5. You will need the following:
-Yakima JetStream Crossbars # Y00425
-SightLine Towers for Yakima Crossbars # Y64AR
-SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y39AR
You also have the option of adding the Yakima SKS Lock Cores # Y07204 for added security. I have attached an installation video below for your reference.
view full answer... - Recommended Quiet Crossbars For A 2018 Honda CR-V W/ A Naked Roof
- I went ahead and checked out the Yakima BaseLine and Skyline systems, and it does not appear that either of those are a fit for your 2018 Honda CR-V per Yakima.
Instead, I recommend checking out the:
-Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 & # Y06189.
These crossbars measure 50" long x 2-3/4" wide x 1-1/8" tall, have a maximum weight capacity of 165-lbs, and
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting Points
- For the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars.
Both are great companies and there's a few differences that are important to note about the two companies.
Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally,
view full answer... - Recommended Roof Rack for 2024 Toyota RAV4
- For an extremely quiet roof rack that fits your 2024 Toyota RAV4 with flush mounted rails I recommend the Yakima JetStream roof rack. You will need the following:
-Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425
-SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR
-Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR
The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise,
view full answer... - How To Attach Yakima Jetstream Crossbars To 2020 Ford Escape with Naked Roof
- The Yakima Jetstream bars will be an excellent accessory added to your Ford Escape. At this time, we do not have in our video or photo library a visual of these crossbars or a roof rack on a 2020 Ford Escape with a naked roof though.
The installation process for Yakima BaseLine Towers Part # Y28TR, BaseClips Part # Y06137, and Jetstream Bars Part # Y00425, will be about the same through various applications. With the parts above, when mounting this roof rack to a naked roof, it allows
view full answer... - Roof Rack for 2018 Mazda 6 that Installs to Fixed Mounting Points of Roof
- For a roof rack that fits your 2018 Mazda 6 that would install to the fixed mounting points on your roof you'd want the Yakima JetStream Roof Rack part numbers # Y00425, # Y00148, and # Y00248 as this is the sleekest option that installs in the way you want it to. Every other option does require door clamps like you mentioned not wanting.
view full answer... - Roof Rack Recommendation and Options for 2020 Kia Sorento with Naked Roof
- I attached a link to a page that has all of the roof racks we offer for your 2020 Kia Sorento, and yes the 2019 fits are the exact same. I really like the Yakima Jetstream roof rack part numbers # Y00425, # Y28TR, # Y06159, and # Y06170 as it gives you a very high quality aerodynamic roof rack that has top channels which allow for more flexibility when attach roof accessories.
I attached an install video for this rack on a similar Sorento for you to check out as well.
view full answer... - Recommended Roof Rack for a 2019 Hyundai Santa Fe w/ a Naked Roof
- Yes, there is a roof rack that will fit your son-in-law's 2019 Hyundai Santa Fe, that doesn't have side rails. This mounts directly to the side of your roof without drilling and has more than enough capacity for a ski rack. You will want the roof rack by Yakima and it includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine
view full answer... - Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
- How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible.
If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car.
To add this kit to your
view full answer... - Recommended Roof Rack for a 2023 Acura MDX w/ Flush Side Rails
- To add a set of Yakima Jetstream crossbars to the raised rails on the roof of your 2023 Acura MDX you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item
view full answer... - Are Yakima TimberLine Towers Compatible With Thule Wingbar Evo Crossbars?
- No, you cannot use Yakima Timberline Towers # Y33TR with Thule crossbars; you must use the same brand for the roof rack system as different brands are not made to be compatible with each other. The only parts that may be compatible among several brands are the industry standard T-slot channels on top, and the standard roof tracks for camper shells or naked roof.
In order to install the Thule Wingbar 50" crossbars # TH711300 that you already have, you'll need Feet # TH710601 and custom
view full answer... - Best Roof Rack for 2020 Mercedes-Benz GLB with Raised Side Rails
- The best roof rack for your 2020 Mercedes-Benz GLB with the raised side rails is from Yakima because it will give your Mercedes a rack that is both quiet and strong while maintaining your Mercedes' distinguished look. The rack is made up of just a couple parts:
- Yakima JetStream Crossbars # Y00425
- TimberLine Towers for Yakima Crossbars # Y33TR
- Same Key System Lock Cores (Optional) # Y07204
The aerodynamic shape of the JetStream crossbars, along with their built-in WindRidges,
view full answer... - Using a Roof Rack on a 2015 Subaru Forester And When To Remove It
- You can leave a roof rack on your vehicle at all times except when going through a car wash, as this will cause damage to the roof rack and vehicle.
The Timberline is actually incredibly easy to remove, as it uses a steel coated rubber strap to mount directly to the raised factory rails and can install in minutes. Because of this, we do recommend getting a set of Yakima SKS cores, part # Y07204 to secure the rack to the vehicle at all times. These will insert into the tower's covers
view full answer... - Roof Rack Recommendation Roof Tent on 2020 Subaru Forester Touring
- We have the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4, # Y33TR and the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, # Y00425, as a confirmed fit for your 2020 Subaru Forester. These have a crossbar weight capacity of 165 lbs. (this is load weight under movement). The iKamper Skycamp 2.0 is not an item we carry, I do not have the specs available to me. However, as long as it meets the weight requirements, it can be mounted. Functionality
view full answer... - Do Yakima Timberline Roof Rack Towers Accept SKS Lock Cores
- The two Yakima round bar roof racks for your 2017 Ford Escape, shown on the linked page, use the Timberline towers # Y33TR which do accept Yakima SKS lock cores like # Y07204. In order to remove and reinstall the cores you will need the Control Key # Y8007835.
view full answer... - What Yakima Towers do I Need for a Yakima Roof Rack on a 2019 Nissan Rogue?
- While we do have a great Yakima roof rack that fits your 2019 Nissan Rogue, Yakima does not have a roof rack that fits your Rogue that uses Q Towers. This is because Yakima discontinued the Q Towers a few years back. We do have some great crossbars that use different towers for your Rogue.
For a great crossbar system setup for your Rogue, the parts you need depend on if you have raised factory rails or a bare roof.
If you have raised factory rails, I recommend the following Yakima
view full answer... - Yakima Round Bar Setup For A 2021 Toyota Tacoma With Factory Cross-Bars
- For your 2021 Toyota Tacoma you will want to use the TimberLine Towers for Yakima Crossbars # Y33TR with the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 for your Round 58" CrossBars for Yakima Roof Rack System # Y00409, the overall weight capacity isn't affected, and still remains at 165lbs for the bars.
view full answer... - Adding Yakima Round Bars To 2005 Nissan Xterra Roof Rack
- It sounds like you are trying to add Yakima round crossbars to the factory roof rack of your 2005 Nissan Xterra. This can be done using Yakima TimberLine Towers # Y33TR and Yakima RoundBar Adapter # Y03536.
If you already have Yakima round bars then you are all set. If you don't, then you can add either the Yakima 48" roundbars # Y00408, 58" roundbars # Y00409, or 66" roundbars # Y00410. I attached a demonstration video for you.
view full answer... - How To Mount Both a Cargo Box and Surf Board On a 2020 Subaru Forester
- I have some great roof rack options for a 2020 Subaru Forester. The best size will really come down to what you are looking to carry. I have attached a nice chart below that gives some better insight on this. As you can see, in order to carry both a cargo box and surf board you'll need super long crossbars which is possible but they will extend out from the vehicle very far. The Yakima CoreBar System will allow you to choose the crossbar length so this is what I recommend, part # Y33TR
view full answer... - Is There a Yakima Timberline Roof Rack that Fits Raised Rails of 2015 Honda Odyssey
- I checked with Yakima and the Timberline roof rack feet part # Y33TR is a confirmed fit for the raised rails of your 2015 Honda Odyssey. For bars you would then want the 60 inch bars part # Y00422.
view full answer... - Do You Carry the Replacement Door Assembly for Yakima TimberLine Towers
- We do have the Replacement Door Assembly for Yakima TimberLine Towers - Qty 1 # 8880631. This assembly works with the TimberLine Towers for Yakima Crossbars # Y33TR.
view full answer... - Recommendation for a Yakima Roof Rack on My 2011 Toyota Rav 4 with Factory Rails
- Good news, I have a Yakima Roof Rack that will custom fit your 2011 Toyota Rav 4.
To have the complete system you will need Yakima Crossbars # Y00408 parts # Y03536 and # Y33TR.
For added security, I recommend that you lock your roof rack to you vehicle with Yakima's Same Key System # Y07204.
I've linked a video on a similar vehicle with Raised Factory Rails for your convenience.
view full answer... - Correct Parts for Yakima Roof Rack on a 2008 Toyota FJ Cruiser
- The recommended round crossbar rack for your factory rails would include the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR and the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536.
view full answer... - Recommended Roof Rack for 2020 Subaru Impreza with Factory Rails
- I have the perfect solution for you. The Yakima RailBar # Y00448-0449 has a very sleek appearance that blends right into the vehicle like a factory bar setup would. A roof rack using the # Y00147 Timberline Towers would indeed work, but the crossbar would be higher up on the roof and the crossbars would extend past the edge of the roof on either side. If you're wanting a slick, close to OEM look it wouldn't be your best choice. If you were wanting to carry more than one or two things on
view full answer... - Are the Yakima JetStream Crossbars on a 2019 Subaru Ascent Compatible w/ Yakima & Thule Attatchments
- The TimberLine Towers # Y33TR and Yakima JetStream Crossbars # Y00426 are confirmed to fit your 2019 Subaru Ascent and are going to be a great option to use both your Thule Portage Canoe attachment and Yakima Keel Over Canoe attachment. You will be able to use the Thule Portage and the Yakima Keel Over with the JetStream crossbars without issue.
You can also add the Yakima Same Key System (SKS) Lock Cores # Y07204. This will allow you to lock your roof rack to your roof.
view full answer... - 70 inch Long Yakima Jetstream Roof Rack for 2021 Toyota 4Runner with Locks
- For a 70 inch long Yakima Jetstream roof rack for your 2021 Toyota 4Runner you'd want the part numbers # Y33TR and # Y00427. Then for a keyed alike lock cylinder setup you'd want the part # Y07204.
It is important to note that you should never have a crossbar setup that extends past the side mirrors. Doing so is not only illegal in some places, it is extremely dangerous. For this reason, I recommend measuring the length from mirror to mirror.
If you need the next length of bars,
view full answer... - Correct Yakima Towers for a 2023 Toyota Sequoia
- The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR.
These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
view full answer... - Yakima Roof Cargo Box and Roof Rack that Fits 2019 Volkswagen Atlas
- The Yakima Jetstream roof rack part numbers # Y00426 and # Y33TR is a confirmed fit for your 2019 Volkswagen Atlas with factory raised rails.
Yakima has their SkyBox 18 cargo box # Y07336 as a fit for this rack too like are interested in. They even have their larger 21 SkyBox part # Y07337 as a fit too so the smaller 18 Skybox would fit well!
view full answer... - Recommended Roof Rack for 2019 Volkswagen Golf 5-Door with Raised Rails
- I do have a great roof rack option for the 2019 Volkswagen Golf 5-Door with raised side rails however the Whispbar Brand is no longer in production with Yakima.
I recommend the Yakima JetStream Crossbars part # Y00425 with the TimberLine Towers part # Y33TR on the 2019 Volkswagen Golf. The JetStream bars are low profile aerodynamic bars much like the Whispbars. The biggest difference is the bar sits atop of the foot instead of through it which makes the rack more versatile when it comes
view full answer... - Recommended Roof Rack for a 2015 Acura RDX with Raised Rails
- I have a solution for you, but the Rola Sport REX Series Roof Rack is not a confirmed fit on the flush mounted side rails on your 2015 Acura RDX. Instead, I recommend using the Yakima Roof Rack Kit for 2015 Acura RDX that uses parts # Y00422 and # Y33TR because it's going to give you a high quality Yakima rack at a similar price point. Yakima products are backed by a lifetime limited warranty, so you're getting a high quality rack that will last a long time.
For added security, I also
view full answer...
Yakima Accessories
Fit to this rack on your 2023 Toyota Sienna
Info for these parts were:
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Updated by:
Wilson B
Updated by:
Michael B
Edited by:
Daron K
Test Fit:
Ed W
Test Fit:
Matthew B
Written by:
Alex H
Video by:
Aidan B
Video by:
Evangeline M
Video by:
Thomas T
Video by:
Charles A
Video by:
Ethan H
Video by:
Samuel H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sue G.
2/11/2024
Working great!