Part Numbers: TLD2126,TLR3500
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (3215 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.I originally ordered the incorrect rear Torklifts camper hold downs for my truck. However, I called etrailer and explained my error. They not only helped me pick the correct ones, they sent them out that day. I haven’t installed the rear TC hold downs yet. I was most impressed with the free shipping both ways with no questions asked! I was issued an RMA and the refund came quickly. Very good customer service in an age when there often isn’t any service , let alone great service. The front mounts fit perfectly!
Installed on a Curt 2 1/2 receiver just put on my F350 SD Supercab Diesel SRW 4x4. This bracket does fit this truck with the Curt receiver. I found a little oil on the drill bits and a reamer to remove the last bit of metal from the holes in the receiver helped mount the brackets.
Easy to install. Good quality construction. Great customer care when I ordered the incorrect version - was well handled.
Delivery was fast. Works perfectly for our Lance slide-in camper.
looks good, easy to install and replaced the torklift tie downs used on factory hitch, now I have a 20,000 lb trailer hitch with 2,700 GTW also. and camper is secure.
Edward J.
8/25/2017
Fantastic, just like they were claimed to do
Great engineering, fit and finish is awesome. Easy install if you have any mechanical ability at all. Love them
Quick shipping, exactly what I ordered. Price was comparable or slightly lower than retailers. Have ordered from etrailer.com before and was pleased with the service, so I am a repeat customer. Have to install on my truck before I can say more.
Nicole at etrailer was sharp and the products - 5 stars for her
The Torklift instruction pictures are poor - look like they have been copied 100 times.
Front brackets were fairly straight forward - but had to remove a skid plate and loosen the fuel tank to install the drivers side.
Rear brackets needed to drill holes. T L should provide a drill template.
Haven’t used with the camper yet.
Super easy to install, I recommend using some masking tape on the hitch to mark where you want to install these.
After reviewing my options to hold a 3500lb trailer on my truck. I decided these were the only option. They are more expensive then the other options that bolt to the body and the bumper, But much more secure.
The install was fairly easy, Customer service from etrailer was awesome. When not in use they are barely visible. Great product, worth every penny!
Thanks again
Both the product and the service are top notch. I ordered the front and rear tie-downs for a 2006 Silverado. The easy to follow instructions made it easy to install the customized tie downs. We have been on the road several times since I installed the tie downs and all the miles I've traveled were with confidence that my camper was secure.
Oh, the other great feature is that they are removable when not in use.
Thank you etrailer!
Exceptional help to get the right part ordered and delivered ahead of schedule and a big thanks to Clinton for his installation videos.
Thought live chat I was told the wrong ones to order. After talking to a representative on the phone they cleared it up but now I have to wait a few weeks since they are on back order.
Part of an order I made for camper tie-downs. Great product and it shipped extremely fast!
I always go to e-trailer first when looking for truck towing or other truck accessories. The customer service and speed of shipping really can’t be beat.
These tie downs are very secure! I used them to secure my Lance 1020, and it was rock solidly mounted to the truck. Installation was not too bad, the directions were clear and easy to understand. I think the only special tool you need is a torque wrench. Overall I’m very pleased with them all around.
Easy instal works great with our Ram 3500. Paired with torklift fastguns makes attaching camper quick and easy, and secure.
Solid, easy to install. etrailer is the only site i even look at now.
These safety downs are easy to install, and are a huge safety bonus. The interlocking pin prepares truck for winter in a few seconds. E-trailer, in this case
Julie, answered all questions, very professional, and was a big help , Thanks
Bolted right on. Had an issue with off-road clearance with the D2127 mounts because of the downward angle they take to clear the full length running boards I had installed on my truck. This resulted in damage to the mount itself (NFS roads can be kind of rough here in Wyoming) So my fix was to pull the running boards off, and order the D2126 mounts, which you will not loose any ground clearance with because they come straight out at 90° angle. Both the D2126 and D2127 mount in exactly the same spot. On the Driver's side one you may find it easier to chock your truck (My Ram 3500 is a 6spd Manual) and release the parking brakes to gain some slack in the cable that you have to work around getting the mount in position. My truck also has factory airbags, but both types of mounts can be used due to where they bolt on. So the only difference is that the D2127 angles down a little to clear running boards, and the D2126 comes straight out. And another thing on the D2127 because of the downward angle; with the Torklift springload turnbuckle you may find them a hair too short and it may require use of a quick link to have enough length to get the ends of the turnbuckle hooked...at least on my camper I did. Overall I'm please with both of these tiedown models for ease of installation, operation, and build quality. It was my own fault for damaging the original one going over a hump in the forest road that my truck didn't clear all the way.
And as to etrailer. I would definitely order from them again. I had trouble finding the D2126 on the website and called and was talking with a sells rep when I finally found them on the site. But he took my order over the phone anyway at around 1pm on Monday, got an email about three hours later saying they were shipped. Package arrived on my doorstep Wednesday. Very fast service and shipping.
Just info on my truck if you are looking for the correct front mounts to use: 2017 Ram 3500, 6sp manual, 8' bed, crew cab, 4wd, SWD, factory airbags, wheel to wheel running boards (D2127), no running boards (D2126)
Very fast and affordable shipping to AL ASKA!
Very pleased with TorkLift Tie Downs. Easy to install, only issue was I had to ream holes that long 1/2 in bolts went through. Looks very well engineered, fit perfectly to my Ram 2500. Very well made, arrived very quickly after order. Happy camper here!!
They work well. I'm glad I went with t hem....
Fast shipping, as described. Only thing if Bailey would install the tie downs, just kidding
Love etrailer.
Worked perfectly! Just as advertised. Great product!
Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
TorkLift Accessories
Fit to this rack on your 2017 Ram 3500
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott
3/24/2023
Still working great after a year. No issues.