bing tracking image

SnowBear Plow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: SB324-081,31053

Retail:$2,478.29
Our Price: $2,403.90
You Save: $74.39
Snow Plow

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me



SnowBear Plow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall
part number: SB324-081

Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.

Features:

  • Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
  • Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
  • Electric winch allows you to easily raise and lower plow
  • In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
    • Includes a wireless remote control as an alternative to the toggle switch
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
    • Manual release handle is easily accessible from front or back of plow
  • Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
  • Skid shoes let you adjust plow height to prevent blade from digging into the ground
  • Strong rubber deflector allows for better visibility by directing snow away from your windshield
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Rugged and durable, all-steel construction
  • Black powder coat finish provides corrosion resistance
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver
  • ISO certification ensures consistent, quality manufacturing
  • Assembly required


Specs:

  • Application: 2" x 2" front trailer hitch receiver
  • Blade dimensions: 84" wide x 22" tall
  • Height adjustment: 9"
  • 3 Blade angles:
    • Left 22 degrees
    • Straight ahead
    • Right 22 degrees
  • Winch lift capacity: 3,000 lbs
  • Weight: 335 lbs
  • 1-Year limited warranty


Note: Due to the size of this item it ships via truck freight.


This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.


Simple, Hitch-Mounted Installation

HITCH MOUNTING

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Easy Lifting with Electric Winch

WINCH

The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.



324-081 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31053

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31053 Curt Front-Mount Trailer Hitch Receiver





Customer Reviews

SnowBear Plow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall - SB324-081

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31053

Average Customer Rating:  4.9 out of 5 stars   (17 Customer Reviews)

Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Blume03/22/2024
2008 FordVan

Great item... but I did not try to mount it with the funky wire fishy things.... I just took the bumper off which is really not that hard to do or put back on at least on my '08 Econoline 250. And yes you do have to trim the plastic under part but that is no big deal either.



by: Joe01/07/2018
2013 Jeep Wrangler

Better than a snowblower!! Made very well, had it put together and mounted in a couple hours. Used it for two small snowfalls and it worked as expected. Great customer service from etrailer!



by: Chris06/08/2020

I'm really satisfied with this front hitch for my 2010 E350 XLT Super Duty. Installation is a bit more complicated than described. I was able to complete the installation in about an hour with the van on the ground. I opted to completely remove the front bumper which is only attached by four nuts. This give complete access to the inside of the frame rails so no fish wire required. This also makes trimming the upper valance much easier. Enlarging the front hole was pretty straight forward. I only had a 1/2 drill bit, but the bolts still dropped in without issue. The hitch does interfere with the factory mounted front license plate which I simply removed. After the hitch is bolted in place, the lower valance will no longer fit without trimming. The instructions provide no diagrams for this so I had to do my best with a Dremel tool. After a minor trim, the valance still required a bit of manhandling to reinstall. The end result is very nice and I look forward to many miles of use.



by: Casey C. 10/21/2016
2012 Ford F-250 Super Duty

I bought a Snow bear personal plow and a separate Curt receiver hitch for the front of my 2012 F250.. after speaking with Erica W. several times due to blunders on my part, all was perfect. Quick delivery, price was right, items are super rugged. The stock photos don't do justice. My plow came in at 350 pounds without the receiver hitch. It's not a cheap toy plow. Get one, they'll fit nearly anything! Thanks Erica!!



by: Jason08/20/2020
2014 FordVan

Very easy install and everything I needed was included. I didn't have a 17/32" drill bit so I used a 1/2" and it worked fine. I pulled the front bumper off, it's only 4 bolts. I ended up having to trim splash guard more than instructions said and used 2x self tappers (M10) for 2 rear ward screws.



by: Loren05/23/2019

The hitch fit perfectly. The instructions showed it could be installed without taking of the front bumper, BUT it was VERY easy removing the bumper, which made it a snap installing the hitch. The instructions for cutting the plastic below the bumper was EXACT. The instructions for cutting the bottom plastic shield were wrong or misleading. But I made a few more cuts and it worked.

Loren

5/24/2020

I got stuck and there was NO way to get pulled out without it.



by: Arizona Jake07/24/2013
2010 FordVan

Wow! Excellent front hitch to launch my boat and built better than the one on the tail of my motorhome. I could launch a 40 footer with this thing and not worry about the weight! Delivered quickly and the best of all help to mount it. Highly recommend!!!

Lulin

10/18/2013

Any video of how to install this hitch , we have a E350 Van ford and want to carry a generator of about 135 lbs.

Patrick B.

10/23/2013

We have not yet gotten the chance to install one of these yet here in our shops, so we do not have a video yet. We do have a link to the instructions, over on the right side of the page towards the middle. It is a pretty straight-forward install. You will need to enlarge two holes that are already in the frame with a 17/32 drill bit. You will also need to trim the fascia to create an opening for the hitch receiver.


by: Richard 08/10/2021
Ford

Install was made easy with the bolt fishing wires included for getting the bolts into the frame. I really like the position just below the bumper and coming through the air dam. I had to trim a small square out of the air dam, and a good amount from from the sides of the splash guard that's under the radiator. I understand some people just remove the splash guard altogether. That would be fine too but I like the more finished look. Works great for my bike carrier and as a recovery point. I also use it to run a small plow for clearing my driveway (I'm in MN). When not in use I keep one of those rubber plugs in to keep debris out. 2013 Ford E350 Super Duty XLT EB.



by: Gregory05/26/2023

Hitch has been great one year in!



by: An11/07/2018
2018 Subaru Forester

These guys are great! When I ever I've had an issue they are super professional and really help out. For example, I had a damaged item that I couldn't fix and reported it to etrailer. Next day the item is shipped and at my door shortly after. Awesome service! I always go here for the competitive price and exceptional service.



by: Robert04/19/2019

Well built I have ordered from etrailer before always great service and great products



by: Douglas W12/06/2022
1997 Jeep TJ

Not to hard to install



by: John 09/16/2019

No problems ordering it and it came qui ckly



by: 04/29/2022



by: Joel 07/10/2021



by: Jared 03/24/2023



by: Jeff 03/22/2021


17
17


Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Solution for SnowBear Snow Plow that Wobbles When Raised Up While Traveling
  • I spoke with SnowBear about the issue you described and they said it sounds like you aren't using the safety chain that came with the plow which was designed for removing the play you are describing. There's more info on it on pages 13 and 14 in the manual of the plow. Secondly, vehicles with plows connected should NOT travel on roadways without the safety chain installed, as this may result in serious damage to the roadway, plow and vehicle and may cause serious injury to the operator.
    view full answer...

  • Snowbear Plow Receiver Hitch vs Custom Mount
  • The biggest difference I have seen between the two style is in the amount of play they have side to side. While it isn't a ton there is more play in the single connection point than what you will get out of the custom frame bracket types. We carry both types here but given the choice I would go with the custom bracket version. If you plan on moving it from one vehicle to another from time to time then the hitch mount is the way to go for ease of use. There is a great option with custom
    view full answer...

  • Front Mount Trailer Hitch for 2001 Ford F-150 for SnowBear Snowplow
  • I have good news all around because there are front-mounted trailer hitches that fit both your 2001 GMC Yukon 1500 and 2001 Ford F-150, and your SnowBear Personal Snowplow for 2" Hitches # SB324-081 will fit on both trucks. - 2001 Ford F-150 Front Mount Hitch: Draw-Tite Front Mount Trailer Hitch Receiver # 65025 Both of these hitches will work great and allow you to mount your snowplow.
    view full answer...

  • Front Mount Hitches for 2007 Jeep Wrangler and 2011 Ford Escape for Snowplow
  • We have front hitches that will fit your 2007 Jeep Wrangler, like the recommended Draw-Tite # 65069, but these are designed to fit with the standard factory bumper. Since you have an aftermarket bumper you will need to check out the linked installation instructions to try to determine if this will fit with your bumper or not. If it won't then the only way for you to get a front mount hitch on your Wrangler is to have one fabricated. According to SnowBear the max height a hitch receiver
    view full answer...

  • Snow Bear Plow Recommendation for Fitting 2004 Jeep Grand Cherokee Laredo
  • In order to use a Snowbear plow on the front of a 2004 Jeep Grand Cherokee Laredo you'll need to use the one that installs with a front hitch. So for the front hitch you'd need the part # C31048 and then for the plow you'd want the part # SB324-081.
    view full answer...

  • Will Snowbear Plow part # SB324-081 Fit Well on 2014 Ford F-150
  • With the Curt hitch part # C31068 installed on your 2014 Ford F-150 the Snowbear Plow part # SB324-081 that you referenced would fit and work well without any adverse effects on the truck.
    view full answer...

  • Front Hitch for 2006 Jeep Commander to Mount SnowBear Personal Snowplow
  • Since the SnowBear Personal Snowplow part # SB324-081 is designed to attach to a front hitch what you'll need is a front hitch designed to fit your 2006 Jeep Commander like the Curt # C31056 and you'd be set.
    view full answer...

  • Wiring for SnowBear Personal Snow Plow
  • According to the control box wiring diagram (see attached) 2 of the wires for the SnowBear Personal Snowplow for 2" Hitches # SB324-081 go to the electric winch and 2 of them go to the battery. The only other thing that you might have is a switch for light accessories but the black wires for that setup go to ground. If none of this matches what you have then go ahead and send me a photo and/or a part number for the box you are looking at and I can see if there is anything else I can find out.
    view full answer...

  • Plow Recommendation for 2002 Chevy Avalanche with Front Hitch
  • For a hitch mounted plow for the type of application you mentioned I really like the K2 # K2AVAL8219. It's 82 inches wide and 19 inches tall that uses a winch motor to raise and lower. It also comes with a wireless remote to make operation and install easy.
    view full answer...

  • Does Snowbear Plow Come With Front Mounted Hitch?
  • The SnowBear Personal Snowplow, # SB324-081, does not come with a front-mounted hitch, but there is an option available for your 2017 Jeep Wrangler. I recommend the Curt Front Mount Trailer Hitch Receiver, # 31432, which is a two-inch hitch that bolts on and is a is custom-fit for Wranglers. The SnowBear offers accessories which are designed to make things easier on you, such as the Lighting Kit, # SB324-127, which mounts to the frame of the plow and simply wires to your Jeep's battery.
    view full answer...

  • Is it Okay to Back Drag Snow with the 84" Wide SnowBear Personal Snowplow for 2" Hitches
  • Yes, I spoke with my contact at SnowBear and they confirmed that you can back drag with the Personal Snowplow for 2" Hitches # SB324-081. It won't perform nearly as well, but it can be used for this application. If you don't already have a front mount hitch receiver on your vehicle just let me know the year/make/model and I can make a recommendation for you!
    view full answer...

  • Can SnowBear Plow be Used with 2004 Jeep Grand Cherokee
  • With a front hitch installed on your 2004 Jeep Grand Cherokee like the Curt # C31048 you can use a SnowBear plow like the part # SB324-081 that you referenced which was designed to attach to 2 inch hitches.
    view full answer...

  • Do You Have a Wiring Diagram for the Snowbear Personal Snow Plow # SB324-081?
  • I went ahead and attached the wiring diagram for the 84-Inch Wide Snowbear Personal Snow Plow # SB324-081. If you need assistance with reading voltage when customizing your switch, I recommend using a circuit tester like the # PTW2993.
    view full answer...

  • Recommended Snow Plow for a 2017 Nissan Titan XD
  • As long as your front mount hitch receiver on your 2017 Nissan Titan XD was between 7 to 13 inches from the ground that the Personal Snowplow # SB324-081 that you referenced will fit. My contact at SnowBear confirmed this. The photo you are referring to is just a generic photo from the manufacturer. We also supply accessories for the SnowBear Snowplow like the Caster Kit # SB324-126 which allows you to wheel the snowplow when bringing it out of storage or putting it away into storage.
    view full answer...

  • Recommended Motorcycle Carrier For Front Mounted Hitch On 1999 Chieftain Winnebago
  • For the motorcycle carrier, I recommend the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 76" Long - Steel - 500 lbs # e98873. This carrier has a detachable ramp which makes loading and unloading your bike easy, and a stop collar lets you quickly install the carrier without having to align hitch pin holes. We don't have a confirmed fit front hitch for your Winnebago. I reached out to my contact at Curt and they don't know of any fit, so cannot make a recommendation. I suggest
    view full answer...

  • Front Mount Trailer Hitch Receiver for a 2000 Ford E450 Coachman RV
  • The CURT Front Mount Hitch, # 31053, only included up to the E350 RV Cutaway models but not the E450. Instead, you can use the Draw-Tite Front Mount Trailer Hitch Receiver, # 65001. According to Draw-Tite, this hitch will fit the 2000 E450 RV Cutaway models. I have included a link to the installation instructions for you.
    view full answer...

  • Fit of Curt Front Mounted Receiver Part 31053 on 2010 Coachman RV on Ford E-450 Cab and Chassis
  • I spoke with my contact in Tech Support at Curt Manufacturing, who tells me that they have not tested this hitch on an E-450 Chassis yet. He said that the hitch will fit if the holes closest to the front of the vehicle measure 39.5 inches apart center-to-center, and the rear most holes measure 38.43 apart center-to-center. The Draw-Tite front mounted receiver, part # 65053 is an confirmed fit for your 2010 E-450 cab and chassis. For reference, I will provide links to the installation
    view full answer...

Info for these parts were:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Ford Van Accessories