Part Numbers: TLC2222,TLC3215
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, it's Brad from Etrailer and today we are at World Wide Technologies Raceway, and we're walking around taking a look at all of the trailers and all the different combos of rigs. And this one caught my eye. I love in-bed campers. I think it's an awesome way to get around and still be able to camp but also have the usability of a truck. You don't need a big old RV to tow things around. And we ran into Leroy, talked to him.
He's got the torque lift mounts here. And he's taken this to Colorado to visit family. And the fact that that holds that in place is key. With that camper, you're really gonna want that stability. The torque lift does a really good job of making sure you have solid points that mount it and keep the camper in place not moving as you're going down the road.
Now having the torque lift tie downs are gonna be essential for your in-bed camper. It's gonna bolt directly to the frame creating a mounting point that extends past the outside portion of the bed. And that way you can have your strut in place and anchor this down. You do have adjustability here with your jam nuts being able to really tension that down perfectly. And you're gonna have them on all four corners of your bed so it's gonna keep it nice and stable.
So I was talking to Leroy about his trips out west to Colorado with this, and a lot of what you're gonna get is gusts on the highway, and something that he did as a racer and fabricator, he made his own wedges inside of the bed to kind of keep that in place because your anchor guard torque lift does act as a little bit of suspension to kind of keep that in place. So that really keeps it nice and steady and just kinda make sure that even over rough and rocky terrain, it's gonna stay in place. Torque lift camper tie-downs come custom fit for your truck, like Leroy has here on his Ram. You'll want to use our fit guide here at Etrailer to ensure that you're getting the proper fit for the front and rear of your truck bed. While you're at it, be sure to pick up a set of torque lift turn buckles to make the connection between your in-bed camper and custom tie downs.
They're available in the traditional style like Leroy has and also as a locking fast gun turn buckle with quick release levers, making it fast and easy to secure your camper to your truck. An awesome day at World Wide Technology's Raceway. We got to meet lots of neighbors whether they be local or around the country right here in Etrailer's own backyard in Madison, Illinois. Now it's awesome to see them in their element with their race cars and we're happy to allow them to have the parts and accessories necessary to make sure that they have the best experience while towing their race cars around.
Average Customer Rating: 4.7 out of 5 stars (3214 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.Poor packaging, missing parts and showed up looking used from being beaten in shipping.
I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, despite the poorly written instructions. Also, the kit did not include a bolt fisher for the 7/16 bolt. The bolt fisher supplied was for a 1/2 inch bolt. Fortunately I had the correct bolt fisher from a previous project. I am also disappointed that the tie down hole has a slot cut in it which seems would significantly weaken it. I am not optimistic that the tie-down point will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot in the tie-down point shut to strengthen it.
Floyd D.
11/11/2021
They are starting to rust significantly. That is very disappoint considering the very high cost of these. It is interesting that they dont allow pictures of the product for this update.
Bit of a tricky install because it is a non-drill installation but once done very impressed.
Could not believe the quick delivery of my tie downs outstanding
Well if I get the right part customer service on the phone was great the front bolted right on and also air bags
I have purchased products from ETrailer a few times. All my experiences have been so positive. First, the phone system is an easy two-button push to place an order. Second, I get a real live person happy to serve their customer. The agent takes time to validate my selection ensuring I am getting the right part the first time. Then I receive a follow-up email to ensure I received the product and there are no issues or concerns. Today, this level of customer service is unheard of. I am 100% sure you too will be treated the same way.
Works great
Very well designed and they fit like a glove! Easy install too.
Installed on 2016 Chevrolet Silverado 2500 HD. Excellent powder coating. Super wrapping and boxing. Super fast delivery. Just the best hardware, exact amounts. First rate fish wires. The rear spring perch is more narrow inside than the length of the bolt. Shear panic when I sent in the first one thinking I couldn't it to stand up. No problem, it comes in at an angle hardware and all. Other side just as easy. Rock solid superior application. Less than an hour for both. Worth every penny for the fit up.
Patrick
5/3/2021
Very secure, holding a great payload with confidence.
These tie downs, as well as the TLC3215 set, were easy to install if you have some mechanical ability. They function well with our Lance truck camper and become unobtrusive when you remove the tie down extensions. It's too early to comment on corrosion resistance, but my hope is they hold up well.
Ken
2/11/2021
These work great with the front tie downs on my camper. Extensions are easy on and off and have held up well in the Northeast climate.
Instructions were straightforward, installation was easy as expected. Didn't need to jack the truck up or anything - just crawl under and bolt on. Easy. Perfect fit for my 2015 GMC Sierra 2500HD
These things are great. I've been using the Brophy ones that clamp onto the bed rails and they worked fine but these are much better. Installation was very easy. These are very quick to get ready to go camping. If you can stomach the price do it you'll be glad you did.
Adam
8/23/2018
These of been doing a great job for the past year. They’re much more solid than the Brophy‘s I used before the camper doesn’t move around at all. Would definitely purchase again if I bought a different truck.
etrailer.com is the best. Great products and great customer service. I purchased these TorkLift custom frame mounted camper tie downs to be installed on my 2017 Chevrolet 3500 HD Duramax single axle short bed. Installation was easy using the great videos provided by etrailer.com.
Bought these as I needed rear tiedowns for my camper. Instructions easy to read and the tiedowns were a pretty easy install. Worked great on our 1800 mile trip last summer. Highly recommend these Torklift tiedowns.
Front tie-downs went on good, not too tough on this senior citizen who doesn't spend a lot of time underneath pickups. All hardware fit well. Went on 2019 Chevrolet Silverado 3500.
The Torklift product is fantastic and etrailer and their staff was fantastic. They helped me get the correct product which allowed me to do what I needed to for my family vacation. Thank you for being so helpful and providing outstanding service.
Great quality and fit perfectly!
Very easy to use and look great on the truck with or without the camper on the truck
High quality camper brackets. Very easy install with the provided instructions and bolt wire helper. The frame can be a little tricky to get the one bolt through and I would suggest some tape to keep it together till it is through the hole. Outside of that install went fast. I now have no worry about my camper moving.
Wonderful Support and service from etrailer! Awesome product and made in the USA ??!
Great product. Fast shipping. The installation videos provided on the page were very helpful. I installed front and reset myself, in about 3 hours.
Instructions were straightforward, installation was easy as expected. Didn't need to jack the truck up or anything - just crawl under and bolt on. Easy. Perfect fit for my 2015 GMC Sierra 2500HD
I ordered these upon recommendation from a friend. Upon receipt I got three estimates and went to a local body shop. When the owner reviewed the installation booklets, he was impressed by the detailed and thorough explanation and pictures by TorkLift. I do not suggest that one person install these, but it seemed easier with two people. I love that the tie downs can be partially removed during non-use to avoid catching on obstructions to the side of the vehicle. Also, the booklet gave a phone number for technical support in case the installer confronts any problems. The salesperson who helped me at etrailer was very helpful and made sure I ordered the correct items to fit my truck. I have always had good results with etrailer.
I've always been happy buying from Etrailer. This was no exception. The Tork Lift tie downs are great and were installed professionally is a less than two hours. (It would have taken me at least twice that long and I cannot lay under a vehicle that long.) I did mention that the product shipping box was broken open and that they might want to beef up the containers as a simple cardboard box won't hole the weight of these heavy-duty tie downs.
LOVE YOUR PRODUCTS!
Easy to install. great how to videos. great customer support. quality products. Love the free shipping. wish you could put some great specials on some stuff, so I could justify buying more!
Joe S.
9/12/2020
still works great thanks
Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
TorkLift Accessories
Fit to this rack on your 2016 Chevrolet Silverado 3500
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado 3500 Accessories
Katrina D.
7/21/2023
I am sorry that this showed up in this condition. Let me get you over to our customer service department for them to better assist you.