Videos
for Solar Charge Controllers
Help Articles
for Solar Charge Controllers
Expert Answers
for Solar Charge Controllers
Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the…
view full answer...Hey Don; good question and no other parts - including any type of adapter plate or mounting plate - is needed to mount the 30 Amp Go Power PWM Solar Charge Controller with Bluetooth #GP76QR. The #GP76QR comes with screws and is ready to be mounted…
view full answer...Your 13-10 equalizers, which should be equivalent to Equalizer #TREQ310 measures 6-1/16 inches from bolt hole to bolt hole (see accompanying photo) and due to that you will need to use the E-Z Flex Heavy Duty Rubber Suspension System #K71-652-00.…
view full answer...The correct replacement for the Oil Seal 225255UC is the Oil Seal part #9103309. These both have a 2.24/2.25" inner diameter and 3.37" outer diameter. They are also designed for use with oil bath hubs.
view full answer...For a 4-way trailer wiring harness for your 2017 Lexus RX350 that has the tow package you would want the part #56083 which is a confirmed fit. This harness does not have a converter box built into it and it just plugs right into a port you have at…
view full answer...The LaSalle Bristol XTRM PVC RV Roof Membrane #3441700534142711440 ships rolled up on a tube just like how it's pictured.
view full answer...We do have the LaSalle Bristol XTRM Roof Installation Kit #3442703414KIT that is used to install the LaSalle Bristol XTRM Roof Membrane #3441700534142711440 that you referenced. I'd check with local RV dealers to you to see if any…
view full answer...For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but…
view full answer...If your rear indicators are not working, it's almost certainly a poor ground, so the first thing to do is take a look at your ground connections to make sure they are attached to bare metal surfaces and free of any paint, dirt or…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Hi David, thanks for reaching out! The older Go Power PWM-30 Solar Controller has been discontinued, but you can use the Go Power PWM Solar Charge Controller with Bluetooth #GP76QR along with the Installation Adapter Plate #GP86QR to replace it! I…
view full answer...The closest compatible option for your Dometic DOTR12CB RV microwave's size is the Furrion Standard RV Microwave #FMSN09BL. It measures 19-1/16" W x 13-5/8" H x 15-7/8" D with a 0.9 cu ft capacity.
view full answer...