CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
Product Specs:
Boat Trailer Parts
Bunks
Bunk Bracket
Swivel Bracket
1-1/4 Inch Long
Galvanized Steel
10 Inch Tall
2 Inch Tall
1-3/4 Inch Wide
2-1/2 Inch Wide
CE Smith
Rust-resistant assemblies let you install 2 roller bunks on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.
Video of CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- etrailer mistake
Customer Reviews
CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4 - CE10003G-4
Average Customer Rating: 4.8 out of 5 stars (40 Customer Reviews)
Rust-resistant assemblies let you install 2 roller bunks on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.by: Rich03/11/2022
Great product. Solved a big problem with my kayak trailer
by: Brad10/14/2023
Good quality. No way of knowing how it will last, but looks like it will.
by: Michael 07/17/2023
Have not done anything yet but everything looks like it work just great
by: Gator10/14/2022
Right design and length for replacing my rusted out bunker brackets.
by: Southcounty06/26/2020
Typical good quality CE Smith product. Installation was easy on these bunk supports. Highly recommended versus value or non-name branded trailer supplies. The quality is worth the couple of extra bucks.
by: Tom 06/09/2023
Got exactly what I ordered and timely. Apprciated the video for installment and understanding of the product.
by: Tim S.05/07/2020
Completely updated the axle, suspension, and added roller bunks to my waverunner trailer. Have taken the waverunner in for the winter and back out for the summer one time. All components were great and the trailer rides really well!
by: Tom 06/11/2021
I was a little taken back because I thought this would come with all nuts and bolts I needed. When I bought the roller bunks they did not state at the time the brackets were not part of it. That was ok so I ordered the brackets and now I have to go find nuts and bolts to fasten the bunks
by: Jeffrey02/10/2023
Cant believe it didnt come with nuts n bolts!
Jenny N.
2/11/2023
It does come with the hardware to attach the swivel bracket to the bolster bracket. Are you missing this hardware?
by: Walt R.07/07/2016
Well constructed product and worked perfectly for mounting the roller bunks!
by: LARRY FOX09/23/2017
I RECIVED MY ROLLER BUNKS AND BRACKETS FAST. WELL PLEASED WITH THE QUALTY OF THE PRODUCT.CANT WATE TO INSTALL THEM AND TRY THEY OUT.THANKS FOR THE FAST DELIVERY.
by: Joe05/31/2021
Everything worked perfectly. However offering the U bolts and a bolt kit at a good price would be nice in order to save a separate trip to the hardware store
by: Paul f11/10/2017
Great products, great price and fast delivery. I have recommended etrailer to several friends.
by: Franz07/23/2021
Adam was very helpful on a return, and made sure I had the correct parts.
Franz
7/25/2022
Installed and excellent.
by: James Fuller12/13/2017
I ordered a number of parts for an older trailer that were delivered promptly, and were good quality.
by: Paul 06/23/2021
Excellent transaction…. Product (just wish it came with the mounting bolts/nuts), price, shipping
by: Robert 03/27/2020
exactly what I ordered but I won't be installing them for several weeks ....I thought they were a bit pricey but that's nothing new these days
Robert
3/27/2021
Works perfectly .. almost TOO good .. First time we unloaded, the boat FLEW off the trailer as we were backing in ...transom went under and everything... pretty funny looking back now
by: George H.09/09/2017
I haven't installed these brackets yet, but they look first quality.
by: Joe lockman03/20/2022
Great staff to work with, my order was here very quick. I highly recommend Etrailer.
by: Jeff 07/25/2022
worked well
by: James07/21/2018
please note that customer must purchase bolts in addition to item i had to travel 100 mile round trip to get them
by: Debbie02/04/2022
Everything just as I ordered. Most impressed with how fast it got here. Thanks. Also very reasonable price
by: Kevin03/15/2022
These were easy to install and adjust.
by: Steven 08/27/2021
Great quality parts and excellent customer service
by: John 05/21/2023
Thanks
25
40
Show More ReviewsCustomers compare CE10003G-4 to these similar products
Do you have a question about this Boat Trailer Part?
VS
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
Product Specs:
Boat Trailer Parts
Bunks
Bunk Bracket
Swivel Bracket
3-1/2 Inch Long
Galvanized Steel
10 Inch Tall
2 Inch Tall
1-3/8 Inch Wide
2-1/2 Inch Wide
CE Smith
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.
Video of CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4 - CE10001G-4
Average Customer Rating: 4.8 out of 5 stars (84 Customer Reviews)
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.by: Ken07/15/2021
New bunk risers are in as is the new bunk and carpet. The reminder here is to check the bolts securing the bunks. The bunks came loose out at the Colorado river north of Yuma so had to jimmy rig the boat to the trailer on the way home to San Diego. Oh, and it was well over 100 degrees on the way home. No bueno! Everything good to go now.
Ken
7/17/2022
Still going strong!
by: Mike W.05/27/2018
Bought a used trailer that did not match my boat's hull. Ordered this hardware and new 6' bunks, cut off original "fixed" mounts and bunks and installed these adjustable ones. Carefully lifting a 4500# boat and working under it and the trailer and other than some parts hard to reach, job went as planned.
I am happy with the results.
I have always been happy with all my experiences with etrailer.
Thx
Mike W.
5/29/2019
Product worked as expected and could not be happier.
by: Wayne06/22/2022
They have worked well for my application. I added a center toon to my boat. Needed a good way to support it on the trailer.
Wayne
6/26/2023
It works as it should. I bought a different trailer and it transfered to it like it was made for it.
by: Matt08/07/2023
Three of the four brackets work great. One continues to slide down which allows the boat to rest on the fender. I've retorqued the bolts 3x and it still slides. down. Otherwise, great.
by: Martin01/13/2020
Bought several parts from eTrailer to complete this restoration and transformation of a 1958 trailer to suit my needs today. Couldn't have done it in only 4 days without the help from this great company with quality products!
by: Jim S.08/10/2013
Turned a driftboat trailer into a driftboat/raft/pontoon boat trailer in less than 30 minutes! easy to take off and on and no welding required.
by: Steven M10/07/2019
I like your products and have built a few interesting trailers from them. This one is for an inflatable catamaran from Dux Boats, and I have the whole boat resting in bunks such that the pontoons are suspended and do not touch anything. I built another one which allows you to carry a hobie 16 and a laser on the same trailer, and independently take them off.
Keep up the good work!
S
S
by: John L07/21/2017
I was originally looking for material, glue and staples to re upholster the bunks on my boat trailer. I found new bunks complete and ready to go on your web site. I came to my senses and bought them. To make the job easier and nicer I also bought new bolster swivel brackets. It was much easier to set the new bunks next to the old
ones and mount the new hardware. You have two great products, I would highly recommend both.
by: Brian03/13/2019
I had been looking for these locally and hadn't been able to find them, so i was very happy to find a complete set at such a good price! And they arrived at the early side of on time and they are very well made and exactly what I needed. I will be using etrailer again in the future, Thanks again and Good Job!
Brian
3/14/2020
The bunk brackets I bought are working out great! In hind sight I do wish I had bought the U bolt set for them at the same time but otherwise theyve been a good purchase!
by: Walt R05/28/2013
Strong, heavily plated and simply designed bracket. Final adjustments were made with a two pound hammer to cant them a little. They did not bend during the process, good hard steel. No disappointments here.
Walt R.
5/28/2014
No rust and no fatigue cracks. These brackets are industrial strength, not cheap junk.
by: Jim F.02/26/2015
Haven't installed the items yet, but they seem of good quality & are exactly what I need & what I expected. Shipping was quite fast & communication excellent! Should the need arise, I'll do business with etrailer again.
Jim F.
3/10/2016
No problems encountered in a years time
by: Howard07/05/2017
Everything came in as advertised. Purchased CE Smith bolsters, u-brackets, lag screws and carpet. Added two bunk boards to my Lowe trailer (Karavan). Only had two boards and I wanted extra to support the weight of the boat. Everything assembled easily. My boat loads easier and trailers better. Plus I have the piece of mind of having 4 boards vs 2.
by: Eric03/25/2018
Used these on a trailer I was setting up for a deck boat. Worked pretty well. The "L" brackets on top could be a bit stronger. They bent a bit putting the boat on the trailer. Since I had extra, my solution was to weld 2 back to back. I would buy again.
by: James08/03/2017
Great selection. Fast shipping. Made my trailer conversion from rollers to bunks. etailer.com made it fast and simple. Just measure up you needs, go on-line and you're set. Three days later you have all the parts you needed.
by: John07/19/2016
Good product-basic bunk bracket. Bought the extra length ones as i wasn't sure how high i needed to put the bunks to get our jetski up high enough on a trailer i rebuilt. Look to be good quality.
by: Kenneth d02/19/2018
our roller supports we purchased for the boat trailer work great. If we need any thing else for the trailer we will be sure to let you know. If anyone ask... we will tell them to look you up....
by: Joshua06/18/2019
Good sturdy bracket, easy to install.
Joshua
6/22/2020
Works just fine, hasnt deteriorated.
by: Xft lou06/08/2017
Nice and strong . They function perfect to hold my two stand up Jetski's on my trailer.
by: T05/02/2021
They fit the roller bunks I installed and the boat now loads easier.
by: Lucas G.04/13/2017
Easy to pick out what I wanted,
Got here quick. I can't complain
The tracking system could be better though
by: Robert08/20/2020
The parts came quickly, all well packed. The coating on them seems very good. Love the way the nuts and washers are packaged and ty wrapped to the u bolts. They should work out well.
by: Robert07/18/2019
The order arrived later than I expected. When choosing what I thought was overnight delivery which prevented me from getting the trailer back to the customer on time. However the product was just what I expected and the trailer is back in use.
by: Craig05/08/2021
Works well to hold trailer bunks
by: Paul 05/10/2020
Etrailer has done it agian they have gave me a great product at an awsome price you guys have a lifetime customer as always im very happy with my purchase thank you
by: Jim07/18/2015
Fast delivery and good product! I plan to change a roller trailer to a bunk trailer.
25
84
Show More ReviewsCustomers compare CE10001G-4 to these similar products
Do you have a question about this Boat Trailer Part?
Rich
3/12/2023
Great solution. I used these to attach two 3” pvc bunks to my trailer. They work perfectly. I made some slight adjustments after the first month.