Product Specs:
Trailer Brakes
Hydraulic Drum Brakes
Marine Grade
14-1/2 Inch Wheel
15 Inch Wheel
16 Inch Wheel
5200 lbs Axle
6000 lbs Axle
7000 lbs Axle
Free Backing
Manual Adjust
Single Servo
12 x 2 Inch Drum
etrailer
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.
Video of Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
Average Customer Rating: 4.9 out of 5 stars (213 Customer Reviews)
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.I bought these new for less than the local brake materials shop quoted me to rebuild the old brakes. They have a nice coating that should resist rust for awhile. They seem to slow the trailer well. I would buy them again.
Very helpful staff. I did all 4 breaks and bearings complete. Glad I checked things out, seals were gone and one wheel had bearings that failed and I was lucky I made it home. Also put on new brake lines and master cylinder, all good now. Tnks
Wayne
3/3/2022
Working great! Dont overgrease your bearing buddys!
Purchase these units as part of my trailer overhaul. These bolt on in the original holes without a problem, very easy to install, added new kodiak brake lines and new drums, very pleased thus far with the product. like it's all one easy set up. I was going to buy new brakes and associate parts but after seeing these and the price I chose this route after than busting my knuckles trying to mess with springs and stuff. highly recommend
After the old backing plate was removed from my 20 year old boat trailer, the installation of the new backing plate and break assemble took less then one hour . The drum with the bearings installed slid right on .
INSTALLED ON A CUSTOMER VEHICLE AND IT WORKED
I Purchased hydraulic drum Brakes - Uni-servo backing plates form Lisa D at etrailer. I could not be more pleased. The items arrived when they were supposed to and were exactly what they were supposed to be. Lisa was very professional and knowledgeable, and followed up through email. I needed the items fast, and even after priority shipping, the cost was less than i could have found elsewhere. I will use etrailer again should the need arise.
Jeff B.
4/16/2018
I am very pleased with the brake system. It is installed and functioning very well on a heavy duty equipment trailer which is often called upon to haul in excess of 10,000
Items were correct! Two boxes to ship the items. First box was damaged and required tape to keep the contents in tack. Second box was not damaged and contained two assembled backing plates. The right plate was missing parts (found in bottom of box) and the pin holding one of the shoes on was bent in two different directions. Had to straighten the pin in order to reassemble the plate and brakes.
Katrina B.
8/25/2022
I am sorry to hear that your item arrived missing some parts. I see that our customer service department has sent you out some replacements. They should be arriving some time this next coming week. Once you have received your replacement order, we would love to hear your feedback.
Delivery was on time and correct application. Packing could be better as parts shifted and tore through box.
Had an issue with a bolt loose in 1 of the brakes but entire assembly was quickly replaced by etrailer and it turned into a great experience.
Great on phone help….. OK was very impressed that the 2 ladies I talked with on 2 different calls really knew their STUFF. Very impressed and ordered on Sat. del. on Wed. with tracking sent to me. Will be back when I break these in with new salt water.
Time will tell, have had issues with them right away. Not sure if it is something I did wrong or faulty components. Have a scheduled service to determine cause of issue.
Jenny N.
6/26/2023
I can understand that you would want the brakes to work right away. Can you tell me more about the issues that you had with them? Was the service company able to determine what was going on?
Great product easy installation very happy with product
As far as I can tell, everything will work. The box holding the left & right backplates looked like it had been dropped. I checked the box and found that one of the plates springs had broken loose. My husband fixed it. Maybe they should put into bigger box.
Fit perfectly and great price!
T hanks
Good quality product at a good price. Also very helpful
Just one of the many satisfied customers with the company etrailer. I have used this on line site to refurbish my used boat trailers over the last 10 + years. During this pandemic I sort of let my trailer sit around and just wait until the end is near to react and make the trailer road worthy. After 3 years in out of salt water (mostly in) you might get this. After acquiring new brakes and drums from etrailer it’s back to the salt water again. Thanks for the essential workers at etrailer George, Savanna, and Carol. Cheers
Good quality parts and materials and/or coatings that will resist the salt water corrosion. Easy swap in for the old parts. I was replacing a set where one brake pad was cracked (the new ones are bonded instead of riveted) and one where the hydraulic cylinder had blown out and drenched everything in brake fluid. Well worth the cost and well worth the additional cost for corrosion resistance if you launch in salt water.
First time order with etrailer.com and can't say enough about the experience. The website is top-notch, from excellent product description video presentations, easy order process and even visuals to provide shipping progress. Excellent assistance on product application and great follow-up customer service. Will not hesitate to order from etrailer in the future. Brakes are excellent quality and build and perfect fit.
Easiest brake job I ever did! Complete assembly bolted to the trailer in the original position. No fussing around. Connected brake line, bled brakes and was rolling again. With free shipping, I couldn't go wrong.
I was initially concerned about finding the right parts as the trailer was fairly old. etrailer had just what I needed. The website is so elegant. I was able to find the right parts quickly and with comparative options to make a final selection. The how-to videos are great. This made installation a little more comfortable. Especially when you do not perform this type of work every day. The parts were of high quality and are working as expected. I highly recommend etrailer for any of your trailer needs.
I have been using eTrailer for two years, Customer service is great, I could also easily reach technical support for issues with installation. They also respond to emails!
I received some great advice and help from Leeza in selecting the correct product for my needs. Without serial numbers or identifiable model numbers on my existing trailer parts, she was able to determine the correct parts for my particular trailer needs (on a 25 year old trailer.whose manufacturer is no longer in business).
I received the parts in the time span indicated upon ordering, and they fit perfectly.
A good experience all around.
The crew over etrailers work their butt off I ordered the wrong 12 inch backing plate with shoes it was already loaded on the truck they went out and pulled it from the truck and did not charge me and reordered and sent the right product it a ride fast
The brake arrived kit sooner than I expected. Christen was very helpful with the order. I mounted them on the trailer this weekend and I will try them tomorrow
Bent pins on one assembly and had to be removed to straighten before installation. Seems to have been dropped some time during shipping or handling.
Customers compare AKFBBRK-7-D to these similar products
VS
Product Specs:
Trailer Brakes
Hydraulic Drum Brakes
Marine Grade
14 Inch Wheel
14-1/2 Inch Wheel
15 Inch Wheel
3500 lbs Axle
Free Backing
Manual Adjust
Single Servo
10 x 2-1/4 Inch Drum
etrailer
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14" to 15" wheels.
Video of Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
Average Customer Rating: 4.7 out of 5 stars (457 Customer Reviews)
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14" to 15" wheels.I restored an old concrete buggy that I purchased surplus from a rental company. It was in pretty bad shape. I got it sand blasted. I painted it with Rustoleum. I installed new brake parts, master cylinder, and wheel bearing kits. Pretty big project but it came out great! Now I have a great little dual-axle dump trailer designed to carry a cubic yard of ready mix. Works great for short loads of concrete and for drain rock and landscape materials too.
I had to use JB Weld to get a good seal on the new plastic master cylinder cylinder-to-brake-hose connection, which was a pain because it leaked and required multiple attempts to fix. Plastic threads on the plastic master cylinder didn't seal with teflon tape. They are easy to over torque/strip! Maybe I did that initially, but JB Weld fixed the problem.
etrailer brake assemblies were easy to install and of very good quality. Fast shipping. Thanks!
This review is for the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs - AKFBBRK-35-D. This worked perfectly on my 2008 Bear pontoon trailer with Axis branded 3,500 lb tandem axles and hydraulic surge brakes on one axle. It all went together smoothly without issue and after repacking the bearings and bleeding the system, the brakes now work again. A special thanks to Jameson for your time and recommendation on this kit, it was spot on!
The quality of the unit seems fine, however they manufacturer is so cheap that they do not include the 8 nuts to hold the brakes to the axle. They expect you to to use the old nuts, in a perfect world that would be fine. Assuming your old bolt bolts and nuts are the same thread! Spent another $12 on nuts which is it a big deal but the hardware store was closed so I had to wait till the next morning. Wont order again.
Jenny N.
7/7/2023
None of brands of brakes that we carry will come with the nuts or lock washers. We mention this on the product pages for the brakes. Some want to re-use what is on the trailer and some want to replace it. We do carry a replacement set as part # BRKH10B.
Nice. Perfect replacemen. For the price ace sends to just replace the whole loaded assembly vs pieces parts.
The brakes work great. The new assembly had studs for mounting to the trailer and the nuts and washers were not included, so I had to get my own. Your information for ordering should make that clear.
Jenny N.
6/7/2023
The brake assemblies that we carry do not have hardware included and we mention it on the product pages. In case you want a complete new set of hardware, we offer part # BRKH10B as a quick way to get it.
Here is some pictures of the before and after pictures of my boat trailer brake restoration. I contacted your customer service and told them what I wanted to do and they sent me all the parts that I needed. Everything went very smooth and all parts fit perfect. Thank you so much for your help and expert advice. Thanks again
Fantastic way to repair brakes on trailer. Actually less cost than buying individual parts to complete the job. Both sides completed in under 2 hours. Will be sure to tell everyone i know that has trailers to used this site for all of their needs. This is the 2nd trailer we have done brakes on,
Extremely happy i found this site.
I’m very pleased with the status provided and the delivery speed on my order. These should have my trailer back in operation today.
The boxes containing the brake kit was badly damaged due to transit. One of the springs popped off and the brake shoes were no longer aligned properly. Packaging was extremely poor. Hopefully there is no damage that I couldn’t see.
Jenny N.
5/10/2023
I am sorry to hear about the boxes and the spring that had to be reinstalled. If there is any more damage then we are happy to take care of it for you. I will have our Customer Service team reach out.
The brake kits fit perfectly.
Excellent product that replaced 25 year old brakes on a boat trailer at a fraction of the price that local dealers wanted for them. I found all of the parts I needed by searching the site and everything installed very easily.
Thanks for the help Kelsey!
just installed brakes,install ok.just hoping to get more milage and time out of these brake .because in the past i have not,i have had cylinders lock up on me on both sides, mechanical issues sitting on the side of the road stinks.but i have also learned that these brakes are not install and go .they need to be adjusted thru out the year for better wear
Liked being able to ask questions before the purchase and being updated on the shipment of my purchase.
Nice brake units.
The loaded marine grade backing plates made my job super easy. The fit was perfect and went smooth. I would like to see new nuts supplied with the studded backing plate. My order was processed fast and I received it quickly. Packaging was great.
Backing plates arrived on schedule. Installed just fine.
I installed these on my 1995 dual axle DHM trailer which carries my '95 closed bow Ski Nautique. The finish is stout and set up very easy. Had a bit of a challenge installing one nut on each side due to close tolerances between the backing plate and axle support but once on, the remaining three when on easily. Recommend doing this over trying to replace just the shoes.
Had to replace the old 20+ year old Attwood brake system. Both the brake assemblies and the coupler are working great.
My new brakes look and fit great. This made the replacement on my Heritage boat trailer very easy. The quality looks great and should last me a long time.
Thanks etrailer for your help!
The product looked great and I got great service. I was unable to use the brakes, though because I needed 5 hole backing plate instead of the 4 hole backing plate. I never got around to seeking a return, my fault.
Very, very prompt shipping!
Customer svc rep very knowledgeable about hydraulic trailer brakes.
Packaging ensured product arrived without damage.
TWO NOTES: The brake line threads were not "well cut" on the right side wheel cylinder. To solved needed to "re-tap" the threads-- additional time required--
To make kit 'complete'--add 8 lock nuts to the package--will add about $0.80 to the kit and solve customers frustration of trying to find lock nuts with 5/8" across the flats. 11/16" across the flats will not work as too close to the welded axle on the mounting flange
Rachael H.
9/14/2017
Thanks for the follow up and reply. I did want to let you know that part BRKH10B is available and is linked as a related item. This item included 8 nuts and lockwashers.
Helpful Links
Great buisness to deal with very prompt and helpful
etrailer has great products with fast and reliable service. I buy all my trailer supplies from them. I bought 2 hubs and drums for my boat trailer. I was going to give 4 stars because they did not include the 4 nut and bolts that hold the hub to axle with the product. (the old ones were so rusted they broke off), at the least they could offer for you to purchase them with hub. but I gave 3 stars because I went back to the reviews and others complained about the same thing. problem should have been fixed back then!!
Mike L.
7/24/2019
The mounting hardware, part # BRKH10B is sold separately as mentioned in the product description.
Helpful Links
Good product, fit very well and easy to adjust when installed ( lubricated the adjuster anyway) After a year of in and out of the salt water once a week for the season they look very good, a little rust, but not bad. Will see next year how they stand up.
Bruce S.
8/26/2022
Update: brake pad came off and locked up trailer wheel yesterday. Told only 1 year warrantee on workmanship issue. 2 years and now I need new brakes because they failed.
Customers compare AKFBBRK-35-D to these similar products
Ask the Experts about this etrailer Trailer Brakes
Do you have a question about this Trailer Brakes?
Jim
12/20/2023
They are working like they should. I ran 800 miles in one day about a month ago, no worries on the trailer end. With the surge brake, just hit the truck brake a little harder and the trailer starts braking also.