If you plan on running the TV off of the trailer battery (12v DC) then I recommend the Jensen LED 12V RV TV # JEN46VR. If you're planning on running the TV off of shore power (AC) then I recommend the Jensen LED 110V RV TV # JE2417. Both of these TV's only weigh 9lbs and have a 100 mm x 100 mm mounting pattern.
As for the TV mount, I recommend the MORryde Wall RV TV Mount # MR23ZR. This full motion TV mount gives you the ability to adjust your TV for the best viewing angle. view full answer...
To be able to mount your TV to your MORryde Portable Wall RV TV Mount w/ 2 Docking Stations # MR54RR you'll just need the VESA Adapter Plates for MORryde RV TV Mounts # MR64RR. view full answer...
The compatibility of the MORryde Ceiling RV TV Mount # MR24RR is going to depend on the mounting pattern of the TV and weight. This TV mount fits a 75mm x 75mm or 100mm x 100mm mounting pattern and can hold up to 25lbs. I recommend measuring the mounting holes on the back of your 40" Samsung TV and seeing what the mounting pattern is to determine fitment. view full answer...
It sounds like you're wondering if the 35-1/2" TV will fit on the MORryde Countertop RV TV Mount # MR62ZR. As long as it has a VESA mount on the back and weighs 50 lbs or less you won't have problem installing the TV on this mount. view full answer...
The Jensen RV TV part # ASA98VR comes with the standard RV TV VESA mount setup so it would mount to your current bracket. I am not sure what you mean by separate module though. view full answer...
The MORryde Ceiling RV TV Mount # MR24RR is rated to for a maximum weight of 25lbs and has a mounting pattern of 75mm x 75mm or 100mm x 100mm. This means there is no specific size maximum as long as it weighs less than 25lbs and has a VESA mounting pattern.
We do not currently carry a large selection of TV's but the Jensen LED RV TV 32" # JTV32DC weighs 13lbs and fits a 100mm x 100mm mounting pattern, so it would be a great option to go with the # MR24RR. view full answer...
The Jensen LED 110V RV TV # JE2417, does not include a wall mounting bracket or TV stand but simply comes with the wall mounting holes on the back of the TV. These are the VESA standard pattern of 75 mm by 75 mm measuring horizontally center on center and then vertically center on center.
On the back of the TV there are mounting holes that measure from center to center 2.952 inches square. If you need a wall mount, I recommend # MAF50 which is a confirmed fit.
As for moving the TV from... view full answer...
The MORryde Wall RV TV Mount # MR23ZR has dimensions of 5.25" W x 5.83" T for the plate that attaches to the wall.
The MORryde Wall RV TV Mount # MR65ZR has dimensions of 10" W x 5.87" T for the plate that attaches to the wall.
Either one of these mounts will work with your Jensen LED RV Smart TV # ASA38VR (JE3221S) which has a 100mm x 100mm VESA mounting pattern. view full answer...
We do have a really good option to replace your 32 inch Jensen JE3208 RV TV, and even have one that fits the same mounting bracket. The part number is the following:
- 1080P Resolution: Jensen LED RV Smart TV # ASA38VR
This is a 110V TV that will fit a mounting bracket with the same 100 mm x 100 mm VESA mounting pattern your current TV has. view full answer...
The live picture we have for the MORrye Wall RV TV Mount part # MR82ZR that shows it pulled out and moved around is for sure the # MR82ZR. I am not totally sure what TV was used but it looks more like a 30 inch TV than a 43 inch TV. view full answer...
The MORryde Ceiling RV TV Mount, # MR22ZR is a flip down mount that can hold a TV weighing up to 35 lbs. and uses the VESA mounting patterns of 75mm x 75mm, 100mm x 100mm, or 200mm x 200mm. Depending on what mounting pattern your TV has as to which mount position you will use but this should easily accommodate up to about a 40" TV, as long as it does not exceed the weight limit. You can also add adapter plates to extend/lower the mounting point. Doing so allows for larger dimension screens,... view full answer...
Sure thing!
It sounds like what you're looking for is the:
-MORryde Wall RV TV Mount # MR57RR.
This R.V. T.V. mount has a drop down swivel design that will allow you to lift and move your T.V. out of the way to access storage that is behind it.
This mount also includes the needed hardware for installation and has a 20-lbs weight capacity. view full answer...
Yes, it is completely safe to travel with your TV on the MORryde Portable Wall RV TV Mount w/ 2 Docking Stations # MR94RR. While you do get the ability to remove the TV without having to mess with hardware, the brackets are a really snug fit so you don't have to worry about the TV being jostled around and/or out of the wall bracket.
I confirmed all of this with my contact at MORryde and I've attached a review video for you to check out. view full answer...
I do have TV wall mount options for you though none are specific to any one model of RV. The MORryde Wall RV TV Mount part # MR93ZR is a great option for example and allows you to mount any TV to the wall 50 lbs or under that uses the following standard VESA patterns: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm, or 200mm x 200mm.
If this won't work, I have attached a link with a list of all our tv mount options. view full answer...
The Jensen HD RV TV part # JTV2815DC is not a smart TV but you can stream Netflix by using it with a FireStick. In order to mount this TV you can use a wall mount or part # STDJTV2815DC for a table mount. Please note the above TV runs on 12VDC power so if you need to use it with 110VAC then you will need the AC/DC Power Adapter for Jensen Television part # ACDC1911. view full answer...
You sure can!
Similar to the Jensen LED RV Smart TV # ASA98VR you're interested in, we have the:
-Jensen LED 110V RV TV # JE5515.
This TV has all the same features as # ASA98VR however it does have the much larger 55" screen you're interested in.
As far as the capability to be mounted outside your RV, you can absolutely do that. All you'd need to do is make sure it is connected to a good 110V power source, just like you would if it were inside your RV. view full answer...
In regards to the Jensen LED RV Smart TV part # ASA38VR, the distance from the center of the upper mounting holes to the top of the TV is 9.18". I have attached a photo below which shows the dimensions indirectly with a bit of math. view full answer...
You will not need any adapter to mount your TV on the MORryde RV Ceiling TV Mount # MR22ZR. Your TV having 10-1/2" from the top to the center of the VESA mounting holes will still have 1" of clearance since the mount is 11-1/2" to the center of the VESA mounting holes. If you have an older version of this mount they did make changes to the mounting holes position on the current model. view full answer...
Go To Results