You have two options to install the Putco Stainless Steel Fender Trim, # P97290, on your 2008 GMC Sierra: a drill option and a no drill option.
For the no drill option you will want to place the trim against your fender and adjust it to the best fitting position (remove the mud guard and other attachments first if necessary). Start with the middle mounting slot, slide the flat end of the metal band, from the inside wall of the trim, through the mounting slot. (See Fig. 2). Hook the bent... view full answer...
Good question, and the difference between the two fender trims for your 2019 Ram 1500 Classic are what they specifically fit.
The Putco Stainless Steel Fender Trim for Dodge Ram - Full # P97190 will fit all models unless they have the factory add-on fender flares.
The now-discontinued Putco Stainless Steel Fender Trim for Dodge Ram - Full P97191 was designed to fit Sport models.
I have added a link to the instructions for you to take a look at as well. view full answer...
We do have the trim kits you are looking for with the Putco Stainless Steel Fender Trim # P97302. This is the chrome trim that fits on just the top portion of the fender like you said you were wanting and does fit your 2004 Dodge Ram as well. view full answer...
At the widest point (center) the rear trim pieces of the Putco Stainless Steel Fender Trim for Ford Super Duty # P97217 are 2" wide. view full answer...
I spoke with my contact at Putco and he said the Stainless Steel Fender Trim, # P97289, will work with the stock mud flaps on your 2009 Chevrolet Silverado 2500 HD, but there will be a small gap between the mud flaps and the fender well after installation.
For installation you will need to remove the mud flaps on your truck to install the trim and then you will attach the mudflaps on top of the trim piece. view full answer...
The Putco Stainless Steel Fender Trim for Chevy Silverado part # P97289 is 1-1/2" wide. Therefore, if you measure 1-1/2" up from the lip of the wheel well that will give you an approximate location of the fender trim coverage. view full answer...
The Putco Stainless Steel Chrome Fender Trim # P97280 can be "Band Mounted" or screwed into the fenders of your 2023 Ford F-350 even if you don't already have fender flares. view full answer...
The Putco Stainless Steel Fender Trim # P97230 for your 2016 Ford F-250 Crew Cab is a no-drill installation. The kit includes all of the necessary stainless steel hardware, and the instructions for installation. view full answer...
The instructions for the Putco Stainless Steel Fender Trim # P97230 can be found linked to this answer page as well as the product page directly. view full answer...
For stainless steel front and rear fender trim that fits your 2012 Dodge Ram 1500 we have the Putco kit part # P97190 as a confirmed fit. It is a bit wider than 1/2 inch though as it varies in width between 1-1/2 inch and 2 inch. view full answer...
Yes the Putco Stainless Steel Fender Trim # P97292 that you referenced does fit over the factory black trim of your 2014 GMC Sierra 1500. view full answer...
Yes, the Putco Stainless Steel Chrome Fender Trim # P97280 has been confirmed to fit a 2023 Ford F-350 with a Crew Cab, Regular Cab, and SuperCab. view full answer...
The OEM mudflaps on your 2009 Chevy Silverado do not require removal in order to install the Putco # P97295. If you have aftermarket mudflaps they would need to be removed, but they can be re-installed once you've got the fender trim mounted up. view full answer...
The Putco fender trim pieces, like the Stainless Steel Fender Trim # P97166 for your 2007 Jeep Grand Cherokee, will be 1-1/2" - 2" according to my contact at Putco. This kit includes stainless steel hardware and instructions so you don't have to drill into your Jeep. view full answer...