Just about any rooftop cargo box that fits on square roof rack bars will also fit on round bars. The one bar style that can sometimes be tougher to fit on is the heavy-duty type offered by Rhino-Rack, such as those in roof rack # RLZ01-DC.
But all of the Inno cargo boxes we offer, all shown on the linked page, will fit both round and square roof rack bars.
One of the most useful accessory items for use with a cargo box is the lightweight and cost-effective Telesteps Folding Step Stool... view full answer...
The Erickson Cargo Control Cargo Bar with Ratchet - 44" to 74" item # 08908 weighs just under 5 lbs. The bar can extend from 44" - 74" and is easy to release. It has a has a total weight capacity of 350 lbs. I have linked a review video below. view full answer...
I would be happy to help. Most standard truck bed widths are right at 72 inches. For your 2019 Ford F-350, I recommend the Erickson Cargo Control Cargo Bar with Ratchet item # 08908. This cargo bar has an adjustable length of 44" to 74". It has a ratcheting lever that secures the bar into place and the rubber foot pads ensure a good grip and won't scratch up your bed or bed liner. view full answer...
While the Erickson Lever Action Cargo Bar # 08907 doesn't have a ratcheting system, if you check out the attached video you can see that when the lever is lowered, the bar actually extends a little more. So once you have the bar extended to the side of your bed there will be additional force put in place to help keep the cargo bar stable. view full answer...
It's really easy to release the ratchet of the Cargo Control Cargo Bar with Ratchet - 44" to 74" # 08908. You'll just need to pull the gold lever back to release the gear and pull the black lever over towards the opposite side to release the bar and allow it to slide back into the tube. I actually have one of these and use it quite often.
I've attached a video where David will show you how to operate this cargo bar as well. view full answer...
The working length for the Industrial Deluxe Lever Action Cargo Bar, part # 08906, is 89 inches through 104 inches.
Unfortunately, we do not have a cargo bar that will work for a bed width of 84 inches. view full answer...
To be able to install a cargo box on your 2016 Nissan Pathfinder that still has the factory side roof rails, you will need to install some cross bars first. After the cross bars are installed you can then go on to install the cargo box. I recommend getting the Rhino Rack Aero Bar Roof Rack # RRVA126B-2 to use for your cross bars.
Once we have the cross bars installed then we can start looking at cargo boxes. The next step in this process is to find out what the rear hatch clearance is... view full answer...
The Erickson Lever Action Industrial Cargo Bar # 08907, you were looking at, is a galvanized steel bar with hard rubber composite material for the foot pad.
I have linked it to this page for your viewing and purchasing convenience. view full answer...
The Rhino Rack Masterfit Cargo Box part # RR69TH that you referenced is a confirmed fit for the OEM bars of your 2020 Toyota RAV4. The curve in your bars wouldn't be an issue at all. view full answer...
The Thule Canyon XT Roof Cargo Carrier, part # TH859XT, that you have referenced is designed to fit factory cross bars that run from side to side on your 2012 GMC Terrain. The width of your factory cross bars will not be a problem. However, you will need to measure to see if your crossbars are between 20 inches and 37 inches for the Thule Canyon XT to fit. I am sending you a link to a video review on the Thule cargo carrier.
I am including a link to a page of the roof cargo baskets that... view full answer...
When installed on your vehicle, the RhinoRack # RRRVP15 will used the fixed points or holes existing in your roof as attachment points. This will place the bars 27-1/2 inches apart, measured from the center of the width of the front bar to the center of the rear bar. You'll just need to make sure that the cargo box you choose is compatible with that bar spread (bar center to center distance apart).
We have tons of different roof cargo boxes which I've linked for you. Just look through... view full answer...
I spoke with my contact at Erickson who said that the Industrial Deluxe Lever Action Cargo Bar # 08906 is made of aluminum and the lever itself is made of steel. view full answer...
For the Malone Cargo 12, part # MPG901, I recommend the Malone AirFlow2 roof rack, part # MPG215. This roof rack kit installs quickly onto your existing side rails/bars and adds a low profile, factory style look to your vehicle.
Additionally, the rear bar can be adjusted for the best fit. Since the Malone Cargo 12 requires only 16 inches between the rear crossbar and the roof hatch to open properly, its very easy to get the right fit with these adjustable bars. view full answer...
The Rola Roof Mounted Cargo Basket 59504 uses mounting hardware that will fit roof rack crossbars up to 1-1/4- tall x 3-1/4-inches wide, AS LONG AS the centers of the two bars are spaced apart one of four specific dimensions. Those bar spacing dimensions must be either 26-1/4, 30, 33-3/4 or 37-1/2-inches. As long as your bars meet the size and spacing requirements this steel cargo basket will fit well.
If you need a roof basket that will fit larger bars and/or bars with different spacing... view full answer...
The ratchet Erickson Cargo Control bar, part # 08908 adjusts from 44 to 74 inches.
I prefer the ratcheting units as they allow more adjustment than the push buttons that have preset adjustment points. view full answer...
The SportRack Vista XL Cargo Box - Roof Mount, part # SR7018, will fit on Thule square load bars, Yakima round crossbars and most factory bars, but you will want to measure the diameter of your factory cross bars on your 2007 Nissan Xterra. This cargo box will only fit factory crossbars that are 3-3/4 inches or less in diameter. The measurements on the U-Bolt that are used to attach the cargo box to the crossbars is 4 inches wide and 2 inches deep in the center of the bolt.
I would recommend... view full answer...
Cargo Boxes are not technically vehicle specific, as long as you have a roof rack on the vehicle you can use a cargo box that is compatible with the bars that you have. Measure from the center of the rear cross bar to the center of the front cross bar for the cross bar spread. You also want to measure from the center of the front cross bear to the point where the roof and hatch meet.
I recommend to use a box with a more versatile fit like Malone Cargo16 Rooftop Cargo Box part # MPG902... view full answer...
Yes, the Thule Motion cargo boxes, such as # TH629706, will fit on the Rhino-Rack roof rack crossbars, # RRRVP27. These Rhino-Rack bars are the same width and only 1/8 inch taller than the Thule AeroBlade bars which the Sonics also fit. view full answer...
I checked with Thule and this Thule Interstate Expandable Roof Rack Cargo Bag # TH869 is confirmed to fit the factory cross bars of your 2012 Honda CRV.
This cargo bag should install and work well on your cross bars that are 29 inches long. view full answer...