The correct Anode Rod is going to be determined by what water heater you have. Unfortunately, your motorhome information does not tell me what water heater you have.
The rod that you were looking at, Camco RV Water Heater Anode Rod # CAM11563 works with Suburban (Mor-Flo) heaters. I have listed out the other Anode Rods that we have available below, along with the water heaters they work with.
- Camco RV Water Heater Anode Rod # CAM11593 (Fits 10-gallon Atwood heaters)
- Camco RV Water... view full answer...
I contacted the manufacturer about a replacement wiring harness for your Atwood 93756, they advised that the 93756 number was just a component in the water heater and not the water heater number itself.
They were able to advise that the 93756 was used in a 94102 IOM water heater and that the 94102 IOM water heater used the Replacement 4-Wire Control Harness for Atwood Water Heaters # AT93312. view full answer...
We only have one water heater that is not tank-less. That is the Dometic RV Water Heater # DMC74FR. The # DMC74FR water heater has cut-out dimensions of 12-3/4" tall x 12-3/4" wide x 19-7/8" deep. The door is available as # DMC58FR.
The RV industry is moving towards tankless water heaters, they are a lot more efficient and standard (tank) water heaters are getting harder to find and find replacement parts for. A tankless option like the Furrion RV Tankless Water Heater # FR93FR produces... view full answer...
It sounds like you have a rupture in the tank of your Atwood water heater. This would be a perfect time to switch to a tankless water heater. It will run more efficiently and provide you with instant hot water. You can replace your existing hot water heater with the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door, part # FR98SR, with minimum alterations.
If you want to do the installation your self, here are the steps you will need to follow.
1.... view full answer...
All of the Furrion tankless water heaters are going to use the same cutout dimensions listed below:
- Between 12 3/4” - 12 13/16” wide
- Between 12 5/8” - 12 3/4” tall
- Min. 23 1/2” deep
The difference between them is the door size, which will help to cover up any excess hole not taken up by the water heater itself. If your cutout is larger than the sizes given, you may need to add additional blocking to help support the water heater. I have listed out the different size options below.
-... view full answer...
I recommend replacing your Dometic GC10A-4E with the Furrion RV Tankless Water Heater # FR68SR. This tankless water heater is more efficient than your tank style water heater. It includes an 18"x18" door to fully cover your 16"x16" opening you have on your current water heater. view full answer...
The Camco RV Water Heater Anode Rod # CAM11563 is the anode rod we carry for Suburban water heaters. This is made of aluminum and measures 3/4 of an inch in diameter and 9-1/2 inches long. You'll need to make sure it's a match with yours. view full answer...
I spoke with my contact at Dometic (who recently acquired Atwood heaters) and she informed me that the replacement for your Atwood GC6AA-7 water heater is part # AT96163.
The only difference with this heater is that this unit has a heat exchange for when you are driving down the road, but you don't have to connect it if you do not want to.
Please note that a replacement water heater should be installed by a professional to avoid potential injuries. view full answer...
We carry the following replacement parts for your Atwood RV Water Heater AT94022:
Double-Panel On/Off Switch for Dometic Gas / Electric Combination Water Heaters # AT91230.
Replacement Door for Atwood RV Water Heaters # AT91385.
If you are needing some other specific parts for your water heater then let me know and I can try to find them. view full answer...
You can indeed replace the power cord for your Kat's Heaters Engine Block Heater # KH11812 with part # KH28812. This replaces the 5 foot long cord and retaining clip. view full answer...
I have an alternate solution for you, but we do not sell the AT96110. The AT96110 was discontinued.
If you want a "standard" tank style water heater, the only one that we carry is the Dometic RV Water Heater # DMC74FR with the Replacement Door # DMC58FR (black).
Your other option and the option I recommend is to go to a tankless water heater like the Furrion RV Tankless Water Heater # FR93FR. I recommend this because the RV industry as a whole is moving towards tankless options and replacement... view full answer...
Yes, I called the manufacturer and they told me you have the Suburban SW6DE Water Heater. We do not have the OEM replacement parts for this unit but we have had customers use the Camco RV Water Heater Anode Rod part # CAM11563 and the Camco Water Heater Element part # CAM02143 with success.
If you would like to replace the water heater all together then we have the Atwood RV Water Heater w/ Heat Exchange part # AT96163 which is a very similar unit but I can certainly understand if you... view full answer...
To replace your Dometic GC6AA-10E water heater I recommend using the Furrion water heater:
Furrion RV Tankless Water Heater - # FR98SR
This is rated for 13,000 - 60,000 Btu which can provide up to 19 gallons of hot water per hour. It measures 19-3/16" deep x 12-5/8" tall x 12-13/16" overall but also comes with a 16-1/8" tall x 16-1/8" wide door which should be a perfect replacement for your current water heater.
Attached is a review video of this water heater for you to check out. view full answer...
I recommend replacing your Dometic/Atwood 2C6AA-7 with the Furrion RV Tankless Water Heater # FR48SR. This water heater has a 16"x18" door to cover the 12"x16" cutout of your current water heater. The Furrion is tankless which will save you from wasting propane to heat water in your current tank water heater when you are not using it. view full answer...
If properly installed and maintained, the Fogatti RV Tankless Water Heater, # LSB44FR has a life span of greater than just the one year. If you have had it examined by a knowledgeable enough person that determined it is your pressure relief valve, the correct replacement part is Water Heater Temperature and Pressure Relief Valve, # CAM10423. view full answer...
For your Attwood G6A-8E water heater, you can upgrade to the Furrion RV Tankless Water Heater # FR48SR and will work in your RV as it is listed as a direct replacement for your water heater. This replacement is listed as a "medium" door measuring at 16" x 18". view full answer...
To replace your Atwood Water Heater G6A-7, I recommend the Fogatti RV Tankless Water Heater # LSB64FR. This measures 14-3/8" long, 15" wide, and 15" tall, with cutout dimensions of 13" wide, 13" tall, and 17-3/4" deep.
This water heater has a heating capacity of 41,800 Btu, and features integrated water line freeze protection, to prevent water pipes from freezing and bursting. view full answer...
The Furrion water heater that will fit your 2017 Keystone Montana High Country 5th wheel is the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 18" x 18" Door, part # FR68SR. This is the Furrion water heater that is compatible with your current opening for your water heater. You may have to do some modifications to your RV to accommodate the larger door.
I have included a product description link and a video installation link below. view full answer...
In order to determine the correct replacement water heater door for your 2018 Forest River Artic Wolf 5th Wheel, I am going to need to know the make/model of your current water heater.
For example, if you have the black Fogatti RV Tankless Water Heater # LSB44FR you can use the:
-Replacement Access Door for Fogatti RV Tankless Water Heater # LSB34FR,
Or if you have the white Fogatti RV Tankless Water Heater # LSB64FR, then you can use the:
-Replacement Access Door for Fogatti RV Tankless... view full answer...
For your Atwood GC6AA-9E water heater, you can use the:
-Dometic RV Water Heater # DMC74FR as a replacement.
This water heater has a heating capacity of 10,000Btu's, a 6 gallon tank, and operates on 120VAC.
Additionally, the installation and service of this water heater must be preformed by a qualified installer, service agency, or gas supplier. view full answer...
Go To Results