The Malone MicroSport Trailer # MPG460G uses a # 34823 grease seal and # L44643 inner and outer bearings like what you can find in the # BK1-100. For a complete hub assembly with the same 5 on 4-1/2 bolt pattern you can use the # CE13210. view full answer...
For your older Thule bike rack with 2" shank you can use Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device # TH62RE as a replacement. If you would like a locking pin then use Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2. I attached a couple demonstration videos for you to check out. view full answer...
The Thule rivet covers you mentioned are compression fit and would typically fit pretty tightly. They usually won't pop out on their own. If one comes out, you can re-install it or replace it with # 14303. A tiny drop of super glue will help the cover stay in place.
If the cap is missing, it can allow a small amount of moisture to enter the box so it's recommended to replace the covers if they go missing. view full answer...
I believe you are referring to the Yakima HoldUp # Y02443. If you need just the HitchLock alone, that is the # Y07235. However, if you need the hitch pin that is compatible with both the HitchLock and the HoldUp itself, that is the # Y8890200. view full answer...
We do have a replacement for a Timken 07000 bearing, as it has a 1.000 inch inner diameter, so what you can use is the Replacement Trailer Hub Bearing # L44643.
In regards to seal, that will depend on the diameter of your spindle where the grease seal rides, but if it is the same 1.000 inches we do have the CE Smith Grease Seals - 10174VB - Single Lip # CE16305A.
Otherwise, if you let me know the number on your seal (if possible) or the diameter of your spindle (to the thousandths of... view full answer...
The replacement hardware for the Draw-Tite Max-Frame Trailer Hitch Receiver # DT82QR on your 2021 Toyota RAV4 can be found as part # RHK on our site. Just input the hitch number prior to placing your order. This is the same case for any of the trailer hitches we carry.
Attached are links to the installation video and instructions on a 2021 RAV4 for you to check out. view full answer...
We do offer a replacement hardware kit for trailer hitches. What you will need is part # RHK. Under the box that says Shipping Special, type in the hitch number, in this case 24704. The under that, choose the hitch manufacturer from the pull down menu, Draw-Tite for hitch # 24704. Click Add to Cart, and that is all there is to it. view full answer...
If you are looking for the parts needed to mount the jack # TJDP-7000S-B, the parts are already included in the packaging. To mount, place female pipe # TJP-FP58 in the proper location for trailer application. Weld on all the way around the female pivot pipe with 3/16" filet weld.
Just in case you need it, I have the breakdown of the parts used to create the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000S-B.
You will need Replacement Drop Leg with Foot for etrailer and Ram Square,... view full answer...
You will need to order a Replacement Hardware Kit # RHK for your etrailer Trailer Hitch Receiver # e98864 on your 2018 Toyota RAV4. On the webpage you will simply enter the hitch number e98864 to ensure you get all the correct hardware for your receiver. Otherwise you will need to source the four M12-1.25 x 35mm hex bolts and 1/2" conical washers locally at a hardware store. view full answer...
The Replacement Wheel Tray for Thule Big Mouth Roof Mounted Bike Carrier # 853-5423-56 does not include the mounting hardware. You will also want 2 bolts # 915064554, 2 washer plates # 853-0333-02, and 2 of the Replacement 3-wing hand knob # 753-0745 to complete the rear mount to your crossbars.
The front mount will require 2 of the Replacement L-Clamp for Thule Big Mouth Roof Mounted Bike Carrier (discontinued) 853-5551, 2 of the barrel nut # 853-0446, and 2 of the T-bolt (discontinued)... view full answer...
Swagman does not provide replacement lock cores so you will need to replace each of the knobs on your Upright Roof Bike Carrier # S64720 with part # P1030. This does not have a keyed alike option so unfortunately you wouldn't be able to order it keyed alike. view full answer...
To replace the hardware for your etrailer Trailer Hitch Receiver # e98864 that fits your 2014 Toyota RAV4, you will need to go the Replacement Hardware Kit # RHK. Once there you will type in the hitch number e98864 and select the manufacturer etrailer from the drop down menu. This will get you the replacement bolt and conical tooth washer needed to reinstall the receiver. view full answer...
In order to find the correct replacement key for your Inno Aero Light 3 Bike Rack INH303, which is no longer available, you will need to find the lock number, which should be on the face of the lock.
This should start with a "T" and will be a 3 digit number. For example. if your key said "T276", then the correct replacement would be the Replacement Key for Inno Roof Racks, Bike Racks, and Cargo Boxes # IN84FR.
If you're able to locate this number, and get back to me, I'd be happy to... view full answer...
The Thule Adventurer attaches to roof rack crossbars using hardware # TH04997. This hardware will fit around bars up to 3-3/4 inches wide. So if the standard hardware does not fit around the bars that you have then the u-bolts you mentioned, the EasySnap also will not fit. Also the EasySnap hardware is not a fit for the Adventurer box. view full answer...
In order to get replacement hardware for your hitch you need the Replacement Hardware Kit for Trailer Hitches # RHK. This will require the hitch item number as well as the manufacturer in order to get the correct parts.
The part number you provided does not correspond with any hitch I have been able to find. However, we do have one hitch for the 2009 Toyota RAV4 that matches the capacities you listed, which is the Curt # C13149. You will still need to confirm if this is the right hitch... view full answer...
For your 2010 Toyota Rav4 we have the replacement mirror for the passenger side. The part you need is the 2010 Toyota RAV4 K-Source Replacement Side Mirror - Electric - Black - Passenger Side, # KS70137T. This is a direct replacement for your factory mirror. view full answer...
The threaded hitch bolt you will need for your Thule DoubleTrack TH990XT is # TH62RE.
The nuts inside the shank though are not available. Nor is the shank itself. But you could either use the new bolt or a tap and die set to cut new threads in the nuts. view full answer...
The key you need for a lock number of 2862 is the Replacement Key for Thule Racks and Carriers # THKEYN2862. Since Thule bought out KarRite, Thule keys will work with your carrier. view full answer...
If you're comfortable doing the wiring, there's no reason why you can't snip off the vehicle side connectors of the Hopkins # HM43385 4-pole/7-way trailer connector to replace your existing 4-pole/7-way.
The wire color codes are as follows:
• Yellow wire-Left Turn/Brake Lamp
• Green wire-Right Turn/Brake Lamp
• Brown wire-Running Lamps
• White wire-Ground
• Purple wire-Reverse Lamps
• Black wire-12-V Auxiliary Feed to Trailer
• Blue wire-Output Voltage From Brake Controller to Trailer
You'll... view full answer...
Your best bet in identifying the vent would be to find a part number or other information printed on or attached to the vent itself. Based on what the manufacturer said I would take a look at the Elixir roof vent replacement lids and see if they match what you currently have.
We have a few different options and colors available. The Replacement Lid for Ventline and Elixir RV Roof Vents - Polypropylene - White # CAM40155 and the same in Smoke # CAM40148 are your best bet. These measure... view full answer...
Go To Results