It will be difficult to provide replacement parts without knowing exactly which model or part number you have on your Kwikee electric steps. You likely have the 42 series which is on most applications produced after 1999; I recommend verifying this and then you can go with Motor Upgrade Kit for Kwikee 42 Series Electric RV Steps # LC380266. This kit includes a new motor, gear, control unit, and the necessary hardware.
Another possible solution is to measure your steps and determine the... view full answer...
You will actually need the Kwikee Step Motor Conversion kit # LC379145. This kit will upgrade your old style motor and control board to the new, more current style so that replacement parts are easier to find and the system will be up to date. view full answer...
The part number for your Kwikee steps' control board is going to be 90950600 and the correct replacement part from Lippert for that control board is the # LC379606.
If you also need the motor or gear box and linkage, those parts are also available and listed below in case you are seeking those replacement parts as well.
Replacement Motor with Mounting Plate for Kwikee Electric RV Steps # LC379608
Replacement Gear Box and A Linkage for Kwikee Electric RV Steps # LC379160
Motor Upgrade... view full answer...
To find the correct sized lug nut you would need to measure the diameter of the stud and the thread pitch to determine the correct fit. From there you could choose the appropriate lug nut to match up with the lug nut covers you already have. The Kodiak Trailer Wheel Lug Nut # KALN1375S for example, fits a 1/2"-20 wheel stud. view full answer...
Sounds like you have the Roadmaster Tow Defender # RM-4750 which means for a replacement screen you'd need the # RM-4750-10. Then for the replacement shock you'd need the part # RM-200023-50 and you'd be set. view full answer...
The correct Roadmaster rear sway bar for your 2022 Tiffin Allegro Open Road 34PA with a 26k GVWR is the part # RM25VR. This works with your Liquid Spring suspension setup as well. view full answer...
We do carry a variety of replacement hinges that should work great with your 2011 Tiffin Allegro motorhome like the:
-Replacement Entry Door Hinge for RV - 6 Leaf - White # LC198295 which has a total height of 9-1/4", and leaf widths of 2-1/8" for the short leaf, and 2-1/2" for the wider leaf's.
Without knowing what you need I cannot say for certain how well this'll work for you, however if you are able to measure your current hinge, and let me know what kind of hinge you need I'd be... view full answer...
The Advent # ACCOL150B roof top air conditioner that you referenced will replace your Coleman, or any air conditioner, that fits the standard 14-1/4" X 14-1/4" standard roof access opening and a 2-1/2" to 5" thick roof. Includes Coleman matched wiring harness to make installation an easy plug and play exercise.
Features a powerful 15,000 BTU of cooling energy. Includes start capacitor and two year warranty.
This AC is not as low profile as the Coleman you mentioned and does not have a... view full answer...
Thanks for that great info with the part numbers. I reached out to the manufacturer who told me the correct replacement for your Kwikee step motor with the part number of 1101423/214-1001 is the Lippert Components Kwikee Motor and Screws for New IMGL Step # LC379147. view full answer...
I have a solution for you, but the Lippert # LC387523 is not the correct replacement. The replacement motor you need for your PowerGear 522176 (Tiffin part # 8730) is the Lippert Replacement Gear Motor Assembly # LC383745 . This is the motor and high torque gear box needed to replace the PowerGear assembly on your 2006 Tiffin Phaeton Motorhome. view full answer...
I contacted Fan-Tastic Fans, and they've informed me that the Replacement Fan Motor Assembly # FVK8017-00 is the correct replacement for your Fan-Tastic Fan part 810244, on your 2015 Tiffin Allegro Motorhome 36LA. view full answer...
Manufacturers do not list the parts they use so we do not know what size gear pack is needed for your 2010 Tiffin Allegro Open Road 34TGA without first measuring the arm.
For a 2 x 2 Arm you'll need part # LC281331.
For a 2.5 x 2.5 Arm you'll need part # LC123356.
For A 2 x 3 or 3 x 3 Arm you'll need part # LC140409. view full answer...
The replacement needed for your Tiffin Allegro with Power Gear 8730, is the Lippert Replacement Gear Motor Assembly # LC383745. This will replace the double shaft motor assembly on your Lippert Components above-floor style slide-out system. view full answer...
To replace the "guts" of your Kwikee 41 Series Steps you need the following parts:
- Replacement Motor for Kwikee Electric RV Steps # LC379147
- Replacement Gear Box and A Linkage for Kwikee Electric RV Steps # LC379160
- Replacement Control Unit for Kwikee Electric RV Steps # LC379605 view full answer...
The correct replacement motor for your Fan-Tastic Vent with 6051-05 17 rmp motor is the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts # FVK6010-81. If your fan was manufactured before 2014, this motor will still work, but you will need to cross the wires. So for example, instead of red to red and black to black, you will need to connect the red wire to the black wire and the the black wire to the red wire. view full answer...
I reached out to Lippert about the Lippert Electric Steps 5041647 on your Tiffin Motorhome and was able to confirm that the correct replacement gear for this is the Replacement Winnebago 5:1 Gearbox With High Torque Motor for RV Steps part # LC22UD which comes with the motor as well so both the gear and motor will need to be replaced. view full answer...
You are going to need to use the Voyager RV Side Camera # VCMS12RGPR with the Adapter # VGR54FR to connect to the 4-pin connector on your 2011 Tiffin Phaeton 40QTH.The Buyers Products Camera # BP68FR you found uses a different 4-pin connector. view full answer...
You're looking for the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts - Off White # FVK6010-80, which is the 17-rpm motor that was originally used in newer vents in coaches after 2014. They used the old 7-rpm motor which was designed for pre-2014 model year Fan-tastic Vents.
The Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts - Off White # FVK6010-80 will work in your FV4100 and is also available in a... view full answer...
You're correct, the Replacement Gear Pack for Lippert RV Slide-outs w/2-1/2" x 2-1/2" Arms # LC123356 uses a 15 tooth gear which is only going to work with Lippert slide outs made after October of 2013. With your motorhome being a 2010, you'd need to use the 18 tooth gear # LC122739 instead. view full answer...
Thank you so much for all of the info!
I reached out to my contact at Lippert and he said that with how old your setup is you're going to be better off going with an entire replacement kit because if you just replace one component right now then you'll likely need to upgrade the other component soon.
If your 2002 Allegro Bus has a single step then the kit you need is part # LC379769, but if it has a double step then the kit you need it part # LC379145. view full answer...