The hardware needed to install trailer hitch # 36334 is listed in the instructions I have linked for you but to ensure you get the proper grade hardware I recommend ordering replacement hardware kit # RHK. Just enter the hitch number and manufacturer where indicated on the product page to get the right kit. view full answer...
Absolutely. We do have complete replacement hardware kits for trailer hitches available with part # RHK. Once on the product page you will need to type in the hitch model number in the box provided and select the manufacturer in the drop-down menu. We'll then send out the full hardware kit so you can get your hitch attached to your Subaru Legacy.
Just as an example, if you happen to have the Draw-Tite Max-Frame # 75560 (which is a confirmed fit for your 2007 Legacy), you will type in "75560"... view full answer...
You will need to order the Replacement Hardware Kit # RHK and enter your hitch number when placing the order to ensure you get the correct kit. This will give you new hardware for the Curt Trailer Hitch Receiver # C12270 which fits your 1996 Subaru Legacy. view full answer...
The pin # 853-5917 will thread into the Thule Parkway bike rack. However, it is not the same threaded pin that comes with the rack. Instead, it is made to work with the Snug Tite lock, # 753-3725-02. You do not have to use the lock with the pin if you do not want to. view full answer...
For a lighter A-frame trailer to add a surge brake setup the best option is the part # T2492800 which has a 6k capacity. But as long as you have properly rated brake assemblies on your trailer it will still work fine on a 2,000 lb trailer.
I attached a help article that covers adding surge drum brakes to a trailer for you to check out as well. view full answer...
The Replacement Carriage Bolt M6 x 65 # 915-066-554 are 65 mm in length which is 2.559 inches so these are the length you need. You may also want the Replacement Metal Bracket for Thule Roof Mounted Carriers # 853-5513 and the Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers # 753-0783. view full answer...
Sounds like the roof rack is either a Thule rack or a rebranded Thule rack based on the barrel number you found so the correct replacement key would be the part # THKEYN001. view full answer...
We do have replacement mounting hardware for your older Thule Atlantis 1800 687 cargo box!
The Quick Grip is part # TH05738, and then we also have the Slide Strip # TH05401 and the Replacement Cradle # TH8523387001 as well if you're needing those. view full answer...
Yes, you will want the part # RHK. Once on the product page you will need to enter the part number (C12270) for the hitch you have and add it to your cart. Once purchased, we will ship you out the correct replacement installation hardware for the Curt Hitch part # C12270. view full answer...