Expert Answers about GMC Yukon
- Availability of Replacement Westin Grille Guard Hardware for a 2000 GMC Yukon
- The thing about the Westin grille guards is that they and the mounting hardware are both designed to fit specific vehicles. It would be awesome if you could take a grille guard from one vehicle and mount it to another with just the right hardware, but you would have to verify that the guard originally came off your vehicle first.
Your Yukon would require the part # 40-0335 for the guard, and if you had the one the replacement hardware would be the # 40-033PK.
If you could verify from...
view full answer... - Replacement Installation Hardware for Curt Trailer Hitch 14029
- Yes you can get the replacement hardware for Curt trailer hitch # C14029. You will need part # RHK. On the RHK page enter the hitch number and choose Curt from the drop down menu. then select add to cart and the correct hardware will be sent to you.
I have also linked a video showing how this hitch installs and a link to the instructions for you.
For your reference this hitch fits the following vehicles:
1992 - 1999 Chevrolet Suburban
1992 - 1999 GMC Suburban
1995 - 1999 Chevrolet...
view full answer... - Replacement Driver Side Heated Electric Mirror for 2005 GMC Yukon Denali
- I have spoken with my CIPA representative, who has confirmed that their # CM27352 is indeed the correct black driver side heated electric replacement mirror for a 2005 GMC Yukon Denali.
It will also fit regular Yukon models factory-equipped with the heated electric mirrors.
view full answer... - Replacement Master Cylinder and Inner Member For Dexter A-75 Surge Brake Actuator
- We do have the Replacement Master Cylinder Assembly # DX44FR or Inner Member # DX99FR (tandem axle)/ Inner Member # DX39FR (single axle) for your Dexter A-75 master cylinder. If the master cylinder is the only damaged part that is all you will need to replace.
view full answer... - Replacement Slipper Leaf Spring for 4 x 8-Foot Harbor Freight Folding Trailer
- We do carry a range of trailer suspension parts including leaf springs, both double-eye and slipper types like your 2-inch-wide slipper spring. However, the shortest such slipper springs are 26-5/8-inches long. These are intended for applications on axles with weight ratings from 4K up to 8K. Our slipper springs' lengths are taken from the center of the eye to the far end of the spring, as on the linked image of part # e74SR (dimension C).
We do have a 20-3/8-inch-long double eye spring...
view full answer... - Replacement Clamp For Thule UpRide Roof Bike Rack
- We do have the replacement clamp you need for the UpRide, which fits both the standard Thule UpRide Roof Bike Rack # TH599000 as well as your Thule UpRide Roof Bike Rack for Fat Bikes # TH599000-FB. I verified with Thule for you that the correct replacement part is the following:
- Replacement Around The Bar Bracket # 1500052940
view full answer... - Correct Mounting Hardware And Bracket Kit For Westin Sportsman Grille Guard
- If you do in fact have the Westin Sportsman Grille Guard - 1 Piece - Black Powder Coated Steel # 40-0335 then the correct mounting hardware and bracket kit is Replacement Mounting Kit for Westin Grille Guard 40-0335 # 40-033PK. Everything necessary for installation is included.
view full answer... - Replacement Brake and Drum Assemblies Fully Assembled
- The electric trailer brake assemblies come in either 12 inch for 5200 to 7000 lb axles like # AKEBRK-7-SA or in 10 inch assemblies like # AKEBRK-35-SA for 3500 to 4400 lbs axles. These brake assemblies come fully assembled with the backing plate. There is not an 11 inch option available.
The drum assemblies do not come fully assembled and will also only come in the 10 inch or 12 inch sizes, not 11 inch. I've linked the page to your options.
view full answer... - Replacement Straps for a Yakima SwingDaddy Bike Rack
- The Yakima SwingDaddy-specific straps are # 8890221 for three. The holes in these straps are 1/2 inch in diameter so you could really use any strap with 1/2 inch diameter holes. You could get a set of 4 Thule straps using # TH534 if you prefer.
There is also a pair of Curt straps you could use, # C18007.
Any of these 3 options would work since they all have about the same length and the holes are 1/2 inch in diameter.
view full answer... - Replacing Clutch Radiator Fan with an Electric Fan on a 1999 GMC Yukon
- Pushers are more efficient and more common. A puller is typically only installed when you don't have enough room between your engine and your radiator.
It looks like your 1999 GMC Yukon has a 5.7 L V8 engine which means you would want to shoot for a CFM (Cubic Feet per Minute) range of 2,200 - 3,000. The most popular fan that we have in this range is the Derale 17" Radiator Fan # D18217 which has an output of 2,400 CFM.
When it comes to fitting your vehicle it really just depends on what...
view full answer... - Needing a Replacement Twist Mount Trailer 7-Way Plug for a 2005 GMC Yukon Denali
- We have a GM twist mount replacement for your 2005 GMC Yukon. The Hopkins Endurance Twist Mount 7-Way RV Trailer Connector, # HM40930, will replace your current plug.
All you will have to do is disconnect your electrical plug from the 7-way connecter. Connect the new 7-way and twist the new plug to mount to bracket.
view full answer... - Replacement Head for 15,000 lb Curt TruTrack Weight Distribution System
- There are replacement head units available for Curt TruTrack weight distribution systems, though you will not need to replace the head unit if you are merely using it with a different vehicle, you can transfer the unit and simply use the original shank. However, if there is an issue with the head unit and you need to replace it then you will need to get the head unit that goes with your TruTrack system. The Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs...
view full answer... - How Do I Know Which Hub Assembly to Use on My Trailer?
- The best way to determine which hub replacement you'll need for your trailer is with the trailer capacity and, most importantly, determining which bearings are used in the hub. You'll need to pull the hubs off and remove the bearings to find the bearing and seal numbers that are stamped on the backs of them in order to match them up with a new hub. If you can't find the numbers stamped on the backs of the bearings and seals, you can use a micrometer to measure the inner and outer dimensions...
view full answer... - Availability of Side Camera Kits for Voyager Wisight Observation Kit
- We do have side camera kits for the Voyager Wisight kits like the # VCMS50RWT for the passenger side and # VCMS50LWT for the driver side.
view full answer... - How to Find Correct Replacement Installation Brackets For Westin Step Bars on 2004 GMC Yukon
- In order to determine the correct replacement bracket kit for you, I'll need to know exactly which steps you have. Westin has several different configurations of Platinum Series Steps, some of which can use different bracketry. Having he step part number would be ideal, buy my Westin representative says he can most likely confirm the steps you have if you snap a photo of the step pads used on your bars. If you reply to this email with the photo as an attachment, I can send the photo to...
view full answer... - Replacement Manual Override Plugs For A Lippert Electric Trailer Jack
- The Replacement Override Plugs # LC733924 are the designed to fit the Lippert Electric Trailer Jack # LC285318. I recommend also picking a cover # UF38-944020 to help protect the head of your jack and extend its lifespan.
view full answer... - Replacement Brackets for Westin Sportsman Grille Guard on 1994 GMC Yukon
- Replacement brackets are specific to both the vehicle and the exact model of grill guard, which you'll want to keep in mind. The only grill guard we carry which fits a 1994 GMC Yukon is the Westin Sportsman Grille Guard # 40-0085 (Black) or # 45-0080 (Chrome).
If this is the grill guard you have, we do carry the replacement brackets and hardware, which are the Replacement Mounting Kit for Westin Sportsman Grille Guard 40-0085 and 45-0080 # 40-008PK.
view full answer... - Will The CIPA Custom Towing Mirrors, Part CM10900 Fit My 2013 GMC Yukon Denali
- Yes, the CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side, part # CM10900, will fit your 2013 GMC Yukon Denali.
I have included a video mirrors being installed on a 2010 GMC Yukon below.
view full answer...
Go To Results