We do indeed have a tailgate assist for you, the Hopkins # 74211. The assist is a torsion spring that will reduce the weight of a 30-40 lb tailgate to 4-7 lbs. Once it's installed on your Sierra, your wife should have a much easier time closing the tailgate. view full answer...
Since WD 40 did not work to unfreeze your Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate # VG-04-4000, likely the simplest fix will be to replace the lock in the tailgate.
Stromberg Carlson offers the Replacement Tailgate Lock for Stromberg Carlson 4000 Series Tailgate # 7455-415. This lock is designed as a replacement for the lock in your # VG-04-4000 tailgate. view full answer...
The nut zerk screw for the DeeZee Tailgate Assist Custom Tailgate-Lowering System for Dodge Trucks # DZ43301 is an M5x0.8 and is not replaceable without the anchor. You would need to purchase the Replacement Installation Hardware for DeeZee Tailgate Assist Custom Tailgate-Lowering System # BKT43301 to replace the screw. view full answer...
I checked with Stromberg Carlson about the correct cover plates for your Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Ford Trucks # VG-15-4000.
This tailgate is a fit for your F-250, and the correct cover plates for it are the following:
- Passenger Side: Replacement Cover Plate for Stromberg Carlson 5th Wheel Louvered Tailgate # 7455-335-15F
- Driver Side: Replacement Cover Plate for Stromberg Carlson 5th Wheel Louvered Tailgate # 7455-336-15F view full answer...
In order to replace the ball bracket on the DeeZee Tailgate Assist Custom Tailgate part # DZ43200 you will want the Replacement Bracket Kit part # BKT43200. view full answer...
Unfortunately, there is not a replacement lock core available for the Pop & Lock Custom Tailgate Lock - Manual - Black # PAL6100 on your 2013 Honda Ridgeline. The only way to replace the lock core would be to replace the entire assembly.
If you would like to upgrade to an option that has a power lock as well as the manual lock, check out the Pop & Lock Custom Tailgate Lock # PL8660. This wires into your existing power door locks so locking your truck locks your tailgate. You still have... view full answer...
The gas shock of the DeeZee Tailgate Assist Custom Tailgate-Lowering System # DZ43301 is not available as an individual component; there is replacement hardware # BKT43301 but for the clips you would need to get a new DeeZee System. view full answer...
The Replacement Bracket Kit part # BKT43200 has the nutsert that you will need for the DeeZee Tailgate Assist Custom Tailgate part # DZ43200 on your 2013 Ford F-150. view full answer...
I had to do some digging around, but I was able to find the replacement tailgate hinge for your Extang Solid Fold on your 2012 Chevrolet Silverado.
You'll want the Replacement Tailgate Hinge for Extang Trifecta and eMax Tonneau Covers # EX1033 according to Extang.
The tail panel you're looking for was not offered as a replaceable part, unfortunately. We do also have the replacement tailgate hinge seal # EX32563200 if you should need that as well. view full answer...
I do have both the replacement tailgate corners and bed cover available for you. For the tailgate corners you will need the Replacement Tailgate End Corners for Extang Tuff Tonno Tonneau Covers part # EX4207 and for the bed cover you will need the Extang Replacement Tonno Cover part # EX13560. view full answer...
DeeZee Tailgate Assist Custom Tailgate-Lowering System # DZ43301 does have what they call a nut zerk fitting like what you show in your picture. If you just need to replace that part use # BKT43301. You have to be very careful not to over tighten this fitting otherwise it will get stripped out and you would need another one. view full answer...
We do indeed offer a replacement latch/hardware kit for your Stromberg Carlson # VG-97-2000 5th wheel tailgate as part # VG-2000-2197. If you needed the cables and set screw, you'd need # 2000-CB. The cable kits are sold individually, so if you need cables for both sides, you'd want to order two of them. view full answer...
We can help you out; what you'd need is the Replacement Hardware for DeeZee Tailgate Assist System # BKT43301. This is going to give you all of the installation hardware used with the DeeZee Tailgate Assist # DZ43301 that fits your 2016 Ram 1500. view full answer...
The Integrated OEM Tailgate Lock - 1999-2007 GM Full Size Pickups # LH-003 is the only option we have for you to get that replacement bezel. We do not have that part available separately. view full answer...
For the DeeZee tailgate assist we have the replacement hardware kit part # BKT43301 that comes with the new bolt you are looking for plus a few other things that you could keep as replacement parts. view full answer...
The gate attachment bolt is 1/2-inch x 5 1/2-inch (M12 x 140mm) for the Gorilla-Lift Utility Trailer Tailgate Lift Assist w/ Cable # GL1.
For an extra bolt and nuts use the Replacement Gate Attachment Bolt for Gorilla Lift Utility Trailer Tailgate Lift Assist # GLGAB.
The # GLGAB comes with the exact replacement bolt, nut, and washer. view full answer...
The entire cable to the end of each loop is about 57-1/4 inches. Between the clamps on each end before the loops is about 51-1/4 inches. The replacement cable for the Gorilla-Lift Tailgate Lift Assist # GL1 is # GLC1-Q1. view full answer...
I checked directly with the manufacturer, Stromberg Carlson, about the correct cover plate for the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Dodge Trucks # VGD-02-4000.
According to them, the correct cover plates are the following:
- Passenger Side: Replacement Cover Plate for Stromberg Carlson 5th Wheel Louvered Tailgate # 7455-335-02D
- Driver Side: Replacement Cover Plate for Stromberg Carlson 5th Wheel Louvered Tailgate # 7455-336-02D view full answer...