Replacement Bearing Kit and Idler Hub For a Snowmobile Trailer With BT-150 Stamped On Hub
Question:
Do you know which wheel bearing kit is needed for a snowmobile trailer hub that is stamped with BT-150? Thanks
asked by: Bryant
0
Expert Reply:
Your BT-150 hub will use the Bearing Kit # BK1-150. Since you have a snowmobile trailer which likely comes in contact with a lot of road salt and chemicals you might consider upgrading to a Galvanized Hub # CE13315. This hub will come pre-greased and ready to slide onto your spindle.
expert reply by:
Bud M
0
BT-150 Idler Hub
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Are Bearings L44549 and L44649 Interchangeable
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Bearing Kit for Dexter 8-259 Trailer Hub
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Tell if 10K Dexter Nev-R-Adjust Electric Trailer Brakes Are for Driver or Passenger Side
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision