I do have some great running board and nerf bar options for a 2000 Toyota Tundra but there are no motorized options. Instead, I recommend using the Westin Premier Oval Tube Steps part # 22-6020-1345 if you are interested in nerf bars or the Westin Molded Running Boards part # 27-0000-1155 if you are interested in running boards. view full answer...
We do have Black running boards that are designed for your 2012 Ram Quad Cab. I have attached a link to the Black running boards on our website you can check out.
I recommend the Westin Platinum Series Oval Nerf Bars, part # 21-3555. These bars are 4-inches wide and have a Black powder coated finish, and also require no drilling for installation.
You can also check out the Rampage Xtremeline Running Boards With Custome Installation Kit, part # RA16180-14615. These 5-inch wide running... view full answer...
Unfortunately we do not have any replacement parts for Wildcat Flash running boards. I highly recommend getting a new set of running boards/nerf bars for your 2001 Chevy Silverado like the Westin # 21-1950.
I have added a link for you of our entire selection of running boards and nerf bars which are a fit for a 2001 Chevy Silverado 2500HD with Crew Cab. view full answer...
We only have one nerf bar set that fits your 2018 Ford Expedition Max with the Aries Round Nerf Bars part # AA203030. Westin does not have a Sure-Grip set of boards that fit your vehicle. view full answer...
According to our nerf bar/running board manufacturers, the fact that your truck has a Diesel engine won't have any effect of the fit, therefore all the fits listed on the provided link will work on your truck. Here's a few suggestions:
If you're just looking for a typical nerf bar, the # 23-1330 stainless 3 inch nerf bars from Westin would be a good choice. The same bar in black powder coated steel would be part # 25-1335.
If you're looking for something a bit more rugged looking, I really... view full answer...
Although the Westin R5 Modular Nerf Bars # 28-534335 you looked at meet that length requirement, they will not fit the mega cab. The closest thing available is the Westin E-Series Round Nerf Bars # 21-3575. These measure 96" long and are the longest nerf bars available that will fit your 2012 Ram 3500 with the mega cab. view full answer...
There are many different options for running boards or nerf bars for your 2018 Chevy Colorado WT Crew Cab. I've linked the page to all your options, but I've also singled out some recommendations for you.
For a blacked out look, I recommend the Westin PRO TRAXX Oval Nerf Bars # 21-24015.
For polished stainless, I recommend the # 21-54010 with the thicker step.
For an easy step, I recommend the Aries ActionTrac Motorized Running Boards with Custom Installation Kit - LED Lights # AA3047904.... view full answer...
Westin has a Grate Step Nerf Bar kit that fits your 2010 Dodge Ram 2500 Crew Cab with the part # 27-74765-1905 which comes with all of the needed install hardware and is a confirmed fit for your truck. You wouldn't have to worry about this not fitting or needing any additional components to complete the install. view full answer...
We do have a couple of solutions but the Aries Round Nerf Bars part # AA207005-2 only includeds the bars instead use the AeroTread Running Boards w/ Custom Installation Kit part # AA2061026 or the DeeZee NXc Running Boards w Custom Installation Kit part # DZ16201-16281 view full answer...
The DeeZee NXc Running Boards part # DZ16201-16241 for black or part # DZ16202-16241 for chrome is an excellent option for a 2014 Jeep Grand Cherokee Overland. In fact, they are the only USA options we have for this vehicle. The DeeZee NXc Running Boards have a nice and tight fit under the rocker panel so you don't have to worry about them reducing ground clearance and they have a nice wide base for traction. view full answer...
Both the DeeZee Nerf Bars # DZ371233 and the Westin E-Series Round Nerf Bars # 23-2310 referenced in your question are confirmed to fit your 2005 Dodge Ram Quad Cab. Because of where the mounting brackets will attach, the DeeZee model will stick out a bit further from the truck than the Westin boards, allowing for easier access to its 3 inch wide step platform. Ground clearance will be very similar between the two running boards on your truck.
The DeeZee Nerf Bars # DZ371233 is a really... view full answer...
The correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2018 Ram 3500 if you have a factory hitch is part # TLD2132 if you have running boards or nerf bars or part # TLD2130 if you don't have running boards or nerf bars for the front and then part # TLD3109 for the rear. view full answer...
For a set of stainless steel 4 inch diameter step bars that fit your 2022 Ram 1500 Crew Cab we have the DeeZee set part # DZ373257 which are the size you are wanting and also will do the best job preventing corrosion. There's no pain on them either so paint chips wouldn't be a problem either. view full answer...
The Westin Outlaw Nerf Step Bars part # 58-54135 which are a fit for a 2022 Chevrolet Silverado 1500 LTD will sit pretty much directly under the cab, there is little to no space between the bottom of the body and top of the step. I have attched a photo to try and show this better. The steps are 5-1/2" wide from outside to outside.
Unfortunately, Westin does not provide weight capacities for their running boards or nerf bars but I would say 300 lbs is a safe guess. view full answer...
We have multiple stainless steel Westin running boards and brush guards for your 2011 Ram 3500 Crew Cab. Your decision is really going to depend on the style that you like best. I have attached a link to all of our Westin stainless steel running boards that we carry for your truck as well as a link to all of the Westin stainless steel brush guards.
The Westin Platinum Series Nerf Bars, # 21-3540, that you referenced are designed for regular cab models and will not fit your crew cab model.... view full answer...
I spoke with my contact at Pilot and they informed me that the overall length of the Pilot Nerf Bars part # NB-1216X that you referenced is 84 inches.
The width of the "C" is 18 inches and the height of each bar is 4-1/2 inches tall. view full answer...
The Westin E-Series Round Nerf Bars part # 23-3585 are what I recommend for a 2019 Toyota 4Runner Limited. It won't matter whether or not you have the side body cladding. The bars have a round shape with black powder coated finish and feature a no drill install. view full answer...
The correct Westin HDX Drop Nerf Bars for your 2018 Ram 3500 crew cab is the part # 56-135652 which means the correct hardware kit is the part # 56-135PK. view full answer...