bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Saturn Aura


  • Parts Needed to Flat Tow 2007 Saturn Aura XR
  • I was able to determine that your 2007 Saturn Aura XR is flat towable as long as you follow the outlined instructions in the owners manual. First thing you'll need is a base plate kit. For that you'd want the part # 523145-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design...
    view full answer...

  • Recommended 50 amp Surge Protector and Power Monitor for RV
  • There sure is! You'll need the Portable Power Watchdog Surge Protector # HU87FR which is designed for the 50 amp power service your motorhome has, and uses bluetooth to send real time watt/volts/amp usage to your phone. Chances are your friends house doesn't have a 50 amp outlet for you to plug into, so you'll need an adapter to plug into a 30 amp outlet # A10-3050FHVP or into a 15 amp outlet with # A10-1550. Keep in mind when plugged in like this only half of your RV electrical panel...
    view full answer...

  • Parts Needed to Flat Tow a 2009 Saturn Aura
  • If you are under the 3,500 lb capacity of the hitch you have on your 2002 Fleedwood Tioga, even just by a little bit, you should be fine. You will want to verify the weight of your vehicle though at a weigh station just be sure that the advertised curb weight is accurate. Also, you will need to make sure you don't ever load any cargo in the vehicle when you are flat towing it as that would put it over the 3,500 lb mark. For a base plate kit for your 2009 Saturn Aura you would want the...
    view full answer...

  • What is Needed to Wire a 2007 Saturn Aura for Flat Towing Behind a Motor Home
  • What you need is to wire the 2007 Saturn Aura with diodes in order to get the lighting functions to work. There are 2 ways in which to wire a vehicle with separate stop and turn signals. The first way basically makes the towed vehicle into a combined tail light system while it is being towed. While not being towed it will function normally. The other way, which includes 2 additional diodes, a converter, and some extra wiring, will allow the vehicle to remain as a separate system at all...
    view full answer...

  • Does Roadmaster Classic Base Plate Kit Work with Stowmaster Tow Bar
  • Yes, the Roadmaster base plate kit part # 523145-1 that you referenced is perfectly compatible with the Roadmaster Stowmaster tow bar like the current version # RM-501 and the older model as well.
    view full answer...

  • Trailer Wiring Harness Recommendation for a 2009 Saturn Aura
  • I have a much better solution for trailer wiring for your 2009 Saturn Aura than the Hopkins kit you mentioned that requires hardwiring. Instead, you would want the part # C59236 which is a custom fit kit for your vehicle that does not require any hardwiring. All you have to do is install the connectors of the harnesses in line with the taillight connectors on your vehicle and the 4-way of the kit will be active and ready to go.
    view full answer...

  • Solution for Trailer Axle with Drop Spindle that Sits Too Low for More Ground Clearance
  • Square axles are pretty uncommon for trailers so there aren't as many options for lifts for them. By your pictures you have a drop axle that is designed to allow the trailer to sit lower to the ground. Your best option is to go with an axle that does not have that built into it and your trailer will sit up much higher. You are going to need to measure your current axles in a few places to get the correct one. You will need to measure from hub face to hub face and then from the spring...
    view full answer...