There are a pair of trailer hitch receivers that fit your 2021 Kia Telluride, the Curt Trailer Hitch Receiver # C13420 and the etrailer Hitch Receiver # e95ZR.
Between these two hitches, the best is the etrailer because it does not require as much trimming of the fascia length-wise (so it will be a bit less noticeable) The two hitches are otherwise extremely similar, apart from the glossier finish of the Curt compared to the more more subtle-looking powder coat finish of the etrailer.
Not... view full answer...
The Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver # 391CONVPT5L is an upgrade kit for a Stealth hitch that came only with the opening for a hitch accessory like a ball mount. So it looks like you have a 2020 Kia Telluride and that would mean you would want this kit if you had bought the # 391KIATELL20 which comes with just the accessory hitch opening accessory.
If what you really wanted was all of it together as one part number you'd just want the... view full answer...
I recommend the Thule WingBar Evo roof rack for your 2023 Kia Telluride. You will need the Crossbars # TH711420, Feet # TH710601 and Fit Kit # TH77JV to fit your flush mounted roof rails. I prefer these rails as they have the 2 piece rubber strip which will allow you to use the channel mounted accessories like the Thule Hull-A-Port Aero Kayak Roof Rack # TH849000. view full answer...
I copied the text of the answer page I made that you referenced below, but you don't want to power the brake controller from anywhere but the battery directly as the circuit you mentioned would not have the amperage required to power the Echo # C51180 and also because powering it from the battery bypasses the vehicle wiring which allows you to not have to worry about anything happening to the vehicle wiring in the event of a short or overdraw.
So the easiest to install brake controller... view full answer...
I have a solution for you that will allow you to carry three 65 lbs e-bikes on your 2021 Kia Telluride.
My recommendation is using the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs, part # K2MMT5X7. The trailer has a ramp and it tilts to aid in the loading and unloading. It has a maximum payload capacity of 1,640 lbs and the trailer itself weighs 451 lbs.
Once you have the trailer, you will need three of the Thule Insta-Gater Pro Truck Bed Bike Rack - 1 Bike,... view full answer...
Since your 2021 Kia Telluride has a naked roof without side rails, I recommend going with Thule SquareBar Evo Crossbars - Steel - 60" Long - Qty 2 # TH712500. You'll also need the appropriate Feet # TH710501 and Fit Kit # TH98ZE.
Since you mentioned adding a basket, I would look into the Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" - 150 lbs item # TH859XT. This is a popular and very nice option that will fit your roof very well. I attached a few demonstration videos or... view full answer...
You are likely referring to the Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" # 18050. Curt recommends using this strap on some of their trailer hitch receivers, mainly class 1 receivers. This would aid in supporting the bikes on the carrier. This is more than enough support for your bikes and bike rack and you would not need any other straps to add to this configuration.
Bikes are very easy to load onto the Saris Freedom. Just place the carrier's arm in the... view full answer...
For your 2022 Kia Telluride if your vehicle does not have factory roof rails, then I recommend taking a look at the:
-Yakima JetStream Crossbars # Y00426, with the towers # Y28TR, and the fit kits # Y06125 & # Y06165. These cross bars measures 60" long, 3-1/8" wide, 1" tall, and has a maximum weight capacity of 165-lbs.
Or,
If your vehicle flush mounted rails, then I suggest taking a look at the:
-Thule WingBar Evo Crossbars # TH711400, with the rail feet # TH710601, and the fit kit... view full answer...
Yes the Yakima BigCatch Kayak Carrier w/ Tie-Downs part # Y04091 will work on your Yakima Rack and Roll Trailer. To prevent them from moving they are easy to tighten down and get really secure.
With that said there is the potential for them to rotate if you put a lot of pressure on them since it is a round bar it is something that we see from time to time. You will be able to tighten them down more but I do not want to tell you that no matter what happens they will never rotate.
I've... view full answer...
For the best hitch that fits your 2022 Kia Telluride LX, I recommend the etrailer Trailer Hitch Receiver # e45ZR. This is a Class III hitch with a 2" receiver. What sets this hitch apart from others is the matte black powder coat finish. This finish provides rust protection and also hides dirt and scratches better when compared to a glossy finish. This hitch has a bolt-on installation and is made in the USA.
If you plan on doing some towing, you will need wiring to power your trailer's... view full answer...
I really like the Thule WingBar Evo roof rack for the flush rails on your 2024 Kia Telluride. This system is easy to install, looks amazing, and is only of the best roof racks for ease of use when it comes to adding accessories. Here are the parts you'll need for this kit:
- 53" WingBar Evo Crossbars # TH711420
- Evo Flush Rail Feet # TH710601
- Fit Kit # TH77JV
- Lock Kit # TH450400 (optional)
Attached is an installation video as well as a photo demonstration of this roof rack installed... view full answer...
Yes, the Curt Echo In Line Wireless brake controller # C79DR is compatible with your 2021 Kia Telluride. Basically this fits any vehicle that has a functioning 7-way including your Telluride. view full answer...
Your 2021 Kia Telluride does not have factory brake controller install wiring so there isn't a plug and play harness option but we did have chance to install the Redarc Tow Pro Liberty part # RED24FR with the universal install harness # RED69FR on a 2021 Kia Telluride using the universal brake controller install kit # ETBC7 which you can see in the attached install video.
This won't be as simple and easy as a plug and play option but it will walk you through the entire process and eliminate... view full answer...
For a Thule Flush Bar roof rack that fits your 2022 Kia Telluride you'd want the Thule WingBar Edge part # TH56FE, # TH89SC, and # TH77JV. view full answer...
We've recently learned that the 2021 Kia Telluride models come with the trailer wiring pre-wiring so the Curt part # CU94FR would be all you'd need to install trailer wiring. view full answer...
The wiring I recommend for your 2022 Kia Telluride is the Curt T-Connector Vehicle Wiring Harness # CU94FR. This will provide you with the 4-way wiring connector you are needing and will require no cutting, splicing or tapping for installation. I have attached a video that goes over the installation of this wiring harness.
If you are needing a ball mount, you can pick up the etrailer Ball Mount Kit # 989900. This will provide you with 2 different ball mounts, 2 different hitch balls, 2... view full answer...
The Yakima SweetRoll Kayak Carrier w/ Tie-Downs # Y04074 can be attached to basically any sturdy hooking point on the front of your vehicle. I took a look at the front end of the 2021 Kia Telluride and I agree that there appears to be no good hooking point for the kayak tie-down straps to attach to. Luckily, there is a solution.
You can simply use Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 # MPG308. This comes with two T-style loops; one can be installed under... view full answer...
The first thing you'll need to tow a trailer with a 2020 Kia Telluride is a trailer hitch and for this I recommend the 2020 Kia Telluride part # C13420 which has a custom bolt-on fit. Then you'll need a trailer wiring harness and for this I recommend the Curt T-Connector Vehicle Wiring Harness part # CU94FR which is plug-in-play.
Please note, if the trailer has brakes, then you'll also need a 7-way like the 4 to 7-Way with 4-Way Adapter part # ETBC7L and a brake controller like the Curt... view full answer...
To start off we will need to get a roof rack on your 2021 Kia Telluride for which I recommend the Yakima JetStream system which includes the following:
60" JetStream Crossbars - Black # Y00426
BaseLine Towers - # Y28TR
Fit Kits - # Y06125 and # Y06165
Then for a ski/snowboard carrier I recommend going with 2 of the Rhino-Rack Ski and Snowboard Carrier # RR573. This can carry 3 pairs of skis or 2 boards so you would be able to use 1 for the skis and then 1 for the boards. I've attached... view full answer...
The roof rack I recommend for a 2021 Kia Telluride is the Thule WingBar Evo Crossbar System consisting of part # TH711420, part # TH710601, and part # TH77JV. This system has the quietest crossbars on the market, lockable feet (part # TH450400), and a custom fit fit kit.
Unfortunately, they don't offer any flush bar crossbar systems for the Kia Telluride. view full answer...
Go To Results