I checked the owners manual for the 2012 Infinity M37 and it states that it will have to be towed using a tow dolly such as # RM-2050-1. The vehicle cannot be flat towed with all the wheels on the ground because it can damage the transmission.
This tow dolly comes with lights and electric brakes. To activate the brakes you will need to have a brake controller installed in the motor home. For a brake controller I recommend the P2, # 90885. But you may need some additional wiring to install... view full answer...
The only trailer hitch for the 2011 Infiniti M37x is # C11111 and it is a Class I hitch with a 1-1/4 inch receiver. You could use an adapter, # HTAD, to use the hitch with 2 inch accessories. However the use of an adapter reduces the tongue weight of the hitch by 50 percent from 200 to 100 pounds.
Since you want to use the hitch for accessories such as a bike rack and cargo carrier, and if looking at new ones, you have to make sure the accessories are rated for use with a Class I trailer... view full answer...
For your 2011 Infiniti M37 we do have trailer wiring available, but they are all universal fit harnesses that will require you to test the wires of your taillight harnesses and splice into them accordingly.
The ZCI kit part # 119250KIT is one of the confirmed fits and requires no splicing to the taillight wiring. It instead uses sensors that clamp to the wiring. This would be the best solution. view full answer...
Go To Results