The most amount of drop we offer in a weight distribution shank with 2-1/2" stinger is 9-1/4", the Curt Weight Distribution Shank part # C17132 which can be used with an Equal-i-zer Weight Distribution System like part # EQ37141ET. If you need a higher capacity, the Equal-i-zer Weight Distribution System part # EQ64FR is available but not without the shank so you would just have to swap them out.
Please note, rise/drop is measured from the ground to the top inside edge of the receiver... view full answer...
Yes, the Solera Awning Plain Idler Head Front Cover # LC289566 that you referenced is the correct cover for a Solera idler awning head like you said you have on your 2019 Heartland Pioneer RV. view full answer...
When installing a ladder on your 2018 Heartland RV the key is making sure the new ladder mounts to the RV's structural components under its outer skin. It is possible that the screw holes will not line up exactly but so long as they allow the included fasteners to reach those structural components the ladder will be able to safely support its maximum rated weight load of 275-lbs for the Surco Ladder part # SP502L.
As far as mounting a portable waste tank on the roof I can't say I've had... view full answer...
I like your style, golf carts make everything better, let me show you what we have below:
**Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703.
*4-Pole Hardwire Kit with Circuit Tester # 18252.
The adjustable width hitch receiver for RV's is going to be the way to go, it is completely adjustable and customizable to fit your set up. Just need to trim to fit and you can weld or bolt it in place for a solid fit.
You will also need a connection for the trailer. Use... view full answer...
Go To Results