There are sliding hitches that fit into the pucks of your 2019 Ford F-250, and the difference between the ones labeled "below bed rails" and "above bed rails" is the ones labeled "above bed rails" require an adapter and don't actually fit into your Ford's puck system.
For a sliding hitch that fits those pucks, I highly recommend the B&W Companion OEM 5th Wheel Trailer Hitch with Slider for Ford Towing Prep Package # BWRVK3370 because it has immense 1 inch jaws which give you a better... view full answer...
We definitely have a roof rack for your 2022 Ford F-250 Crew Cab. We do also have ladder racks that can be used with some tonneau covers if you ever change your mind and want to get one added, but let's back to the matter at hand.
I recommend going with a Thule set up as I have used Thule products throughout the years and have found them to exceptionally long lived and reliable. To get a complete roof rack system on your truck, you will need the Thule WingBar Evo Crossbars # TH711520,... view full answer...
If your 2017 Ford F-250 Super Duty is a 4x4 model, I suggest the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers, # AL88399 for the rear axle. Please note a linked a product review and installation video below of this product being installed on a 2017 Ford F-250 Super Duty.
If you have a 4x2, then I suggest the Air Lift LoadLifter 5000 Air Helper Springs, # AL57391 for rear axle. I recommend adding the Air Lift WirelessONE Compressor System for Air Helper... view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1116 is what I recommend for a 2019 Ford F-250. It fits both the 6-3/4' and 8' bed models. It mounts to the bottom of the frame so there will any interference with air bags like the Firestone Ride-Rite Air Helper Springs. view full answer...
Yes, the B&W Ball and Safety Chain Kit for Ford, GM, and Nissan Titan Underbed Gooseneck Trailer Hitch # BWGNXA2061 can be used with Convert a Ball Fifth Wheel to Gooseneck Adapter part # CAB-C5G since the top of the ball is not open with any latches like the factory Ford balls have. view full answer...
The Timbren Suspension Enhancement System - Rear Axle # TFR250SDJ that you were looking at is confirmed to fit your 2018 Ford F-250 4x4 and has an 8600lb load leveling capacity so it will be more than enough to handle your 3000lb cabover camper, but the Timbren systems are known for causing a much harsher unloaded ride so I have another option for you.
I recommend going with the SumoSprings Rebel Custom Helper Springs - 2 Piece - Rear Axle # SSR-128-47-2 which have a 4600lb load leveling... view full answer...
If your 2015 Ford F-250 has a towing package and you see 4 "bolts" in the bed of the truck you do have the OEM hitch prep package like what the Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider # DM8550038 is designed to fit. I attached a picture of what the rail kit would look like for you to compare to your truck to be absolutely certain!
The Hijacker you mentioned is a really great hitch as it automatically slides when you make tight turns which is much more convenient than having... view full answer...
Yes the B and W Companion Slider for Ford Rail Kits part # BWRVK3370 that fits your 2019 Ford F-250 will fit under a tonneau cover. I attached a picture that shows it installed in a truck with a low profile tonneau cover and you can it will easily fit under it.
Check out the review video I attached as well that shows it installed in a truck that has a tonneau as well. view full answer...
Torklift does not offer just the frame portion of their tie down kits. So for your 2011 Ford F-250 you'd have to go with the entire kit of part numbers # TLF2012 and # TLF3006 and you'd be set. view full answer...
If you were to use a Timbren kit for rear suspension enhancement for your 2019 Ford F-250 you'd want the lighter duty # TFR250SDJ as the 350 version would be very harsh and not comfortable.
But if you want the best option I would highly recommend the RoadActive Suspension kit part # RAS3611-SLHD as this gives you adjustable suspension support that will actually improve your handling and ride quality unlike other options like the Timbrens that make the ride quality noticeable harsher. view full answer...
For your 2022 Ford F-250 we have the UWS tool box part # UWS01048 for a black box or the part # UWS01040 for bright aluminum that are a confirmed fit and are shorter than the bed rail height of your truck so your tonneau would be able to close over it. view full answer...
I still would not recommend the use of the Curt gooseneck ball part # C60692 that you referenced. Although the latch is metal like you mentioned there is still a recessed section on top of the ball that's going to interfere with the nut and over time be an issue.
I know it's not the solution you are wanting but the Ranch Hitch # AM3100 is the better choice for this route.
If your trailer has a Lippert pin box on it though the ultimate solution is a Reese Goose Box like part # RP85FR which... view full answer...
Yes the Custom Third Brake Light Camera for 4.2" Factory Monitor # 3460002 will work on your 2020 Ford F-250 with a 4.2 inch screen!
I attached a review video for this for you to check out as well. view full answer...
I have a different option for you, but there are no scissor jacks rated for lifting (leveling) a trailer like your Forest River Flagstaff Super Lite 29KSWS.
Instead you will need to use the tongue jack to level the trailer front to back, and leveling blocks like the # UF48-979050 to level the trailer side to side.
I included a video of the # UF48-979050 for you to take a look at. view full answer...
For a bearing kit that fits your 6k axle you'd want the etrailer # BK3-100 which comes with the correct bearings and seal that matches the dimensions you listed as well. These are the only quality of bearing that's going to fit your trailer. If they are packed with grease and maintained they will last you a long time though. view full answer...
The ladder rack I recommend installing with the Mountain Top EVO-M Retractable Hard Tonneau Cover with T-Slot Accessory Rails # MNT48VR on your 2022 Ford F-250 Super Duty short bed is the Yakima OverHaul HD # Y01151-5855.
I really like this rack because the height is adjustable, it's easy to install, and the uprights are designed to match the geometry of your truck cab so it looks a lot more clean than your standard ladder rack. In addition to all of this, there are multiple tie-down points,... view full answer...
For your B&W Companion 5th Wheel Trailer Hitch w/ Slider # BWRVK3400-5W you can use a general all-purpose grease to lubricate it, the LubriMatic Multi-Purpose Lithium Grease # L11316. view full answer...
I would be happy to recommend an air helper spring kit for your 2018 Ford F-250 with the 6.2L engine.
If your F-250 is a 4WD model I highly recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88399 which offer 5000lbs of load leveling capacity and have an internal jounce bumper that will support the load if there is ever a failure with the bag.
If you have a 2WD model instead you would need the # AL88391 instead.
Both of these kits will... view full answer...
SumoSprings kits like the part # TSS-107-40 would be an excellent choice to give the added support needed to prevent the suspension of your Jayco 30.5 from bottoming out. This is an overslung kit which means if your springs are over the axle.
If instead you have an underslung setup you'd want the part # TSS-106-40. view full answer...
The correct Equal-i-zer Weight Distribution System for a trailer with 8,500 lb GVWR is 12K, part # EQ37120ET for 2" shank or part # EQ37121ET for 2-1/2" or 3" shank. If you have a 2-1/2" receiver then you will also need the Equal-i-zer Weight Dist Shank part # EQ90-02-4700. If you have a 3" receiver then you will still need the Equal-i-zer Weight Dist Shank but you will need to use your 3" to 2" adapter as well, you can use your 2-1/2" to 2" adapter if you have a 2-1/2" receiver. There... view full answer...
Go To Results