The first thing you are going to want to do is consult the owners manual for your 2008 Dodge Nitro to determine what the capacity of the vehicle is and that is the capacity you need to go by. I have it on good authority that the standard towing capacity is 2,000 pounds and with the factory tow package it increases to 3500 pounds and up to 5,000 pounds with weight distribution and the factory tow package. There may be other things in the factory tow package like different engine tune or... view full answer...
For your 2007 Dodge Nitro you are going to want a roof rack with longer crossbars like the Rhino Rack part numbers # RRVA126B-2, # RRRCL4, # RRQMVA05, # RRQMVA10, and # RRRCP55-BK which is a confirmed fit and has bars that are 49 inches long.
Then to carry up to 4 kayaks the Stacker part # TH830 would be a great choice as it allows you to carry all of the kayaks on end. view full answer...
We don't have access to an exact dimension for how far out from the side of your vehicle the Aries steps part # AA205015-2 would install, but if you check out the picture I attached to this page you'll see what they look like installed on a vehicle like yours to give you an idea. view full answer...
The vehicle wiring harnesses confirmed to fit your 2008 Dodge Nitro, the Curt # C56334 and Tekonsha # 118554, will both work with incandescent or LED lights and neither will damage the module.
Between the two I recommend the Tekonsha # 118554 because in our experience we have heard great seen them last longer and be more reliable that other manufacturer's, and as such they have become a favorite of our installers.
I included a video of the # 118554 being installed for you to take a look at. view full answer...
Basically you would need to replace the rear hanger with a double eye style hanger, use a shackle strap and then get the appropriate leaf spring. The lightest capacity spring we have is the part # e84SR which you referenced.
For the price the best option is to just replace all of the hangers and use the kit part # APS1 which comes with everything you'd need and would work great. view full answer...
Both the Curt # 13334 and the etrailer hitch # e83KR are very easy to install and are virtually identical hitches except for the finish. The Curt # 13334 has a traditional glossy black finish and the etrailer # e83KR has the modern matte black finish. I also attached a link to an install video for you to check out as well.
Then for trailer wiring the easiest to install and most reliable option is the Tekonsha kit part # 118554 so it's what I'd recommend.
Since you wanted to do some... view full answer...
The wiring in your hitch is not rated for use with the Master Lock Electric Trailer Winch # 2953AT. The wiring could overheat and cause damage to the hitch wiring, the winch, or even your vehicle.
You will need to wire the winch separately. I recommend the Winch Trailer Wiring Kit # BDW20307. The kit contains properly sized wiring and connectors to make use of the winch easy and removable. view full answer...
A 350 lb tongue weight capacity trailer hitch would have the hitch capacity for a 300 lb carrier and scooter setup.
You would also need to consider the tongue weight rating of the vehicle too and be sure not to exceed this figure as well. I looked up your 2011 Dodge Nitro and at least a couple versions of it had enough capacity for this. But you will need to consult your owners manual to determine for sure if your specific model is rated for it.
It sounds like you are referring to the... view full answer...
For a complete towing setup for your 2010 Dodge Nitro Heat to pull your 21 foot travel trailer, you will need a hitch, brake controller, and wiring. In addition, I would recommend a weight distribution system with sway control, and adding an aftermarket transmission cooler.
The Curt Trailer Hitch, part # 13334, which is a Class III 2 Inch Hitch, would be a good choice for your Dodge Nitro. Part # 13334 mounts below the rear bumper fascia. We do not have a hitch available for the Nitro... view full answer...
To install a 7-way on your 2011 Dodge Nitro will first require a 4-way be installed which we have found that the Tekonsha 4-ways are the most reliable so for that I would go with the # 118554.
Then for an easier to install brake controller solution the Curt Echo Mobile part # C51180 is a really great choice as it doesn't require any hardwiring and is proportional which means it senses how hard you apply the vehicle brakes and applies a relative amount on the trailer brakes.
To install... view full answer...
The K-Source Tow Mirror part # KS3990 that you referenced will fit the mirrors of your 2007 Dodge Nitro. These mirrors will fit mirror housings that are between 4-1/2" to 11-1/2" tall and I looked up pictures of your mirrors and they would be sized and shaped perfectly for these mirrors. view full answer...
If you're looking for just the bag, this is the one you need. etrailer Cargo Bag w/ Mounting Straps - Water Resistant - 20 cu ft - 59" x 24" x 24" Item # 988501. I've put our bag to the test! Don't worry about water getting inside the bag, after the test all the contents of the bag were bone dry.
If you don't have a roof rack you will want one because you will have a hard time strapping any bag you choose on your roof. Getting a roof rack system will help tremendously with strapping down... view full answer...
I do have towing mirror options for you but they do not offer any custom fit mirrors for your 2011 Dodge Nitro therefore the CIPA Custom Towing Mirrors part # CM11550 (Ford F-150) will not work. The best option you have is a universal fit option like the K-Source Universal Towing Mirrors part # KS3891-2 or the CIPA Universal Towing Mirrors part # CM11980-2.
The CIPA and K-Source options both perform really well though they might not look as good as a custom fit mirror. The K-Source option... view full answer...
For a weight distribution system to tow your horse trailer you will want a system that has a tongue weight capacity range that encompasses the tongue weight of the trailer when loaded and ready to tow plus the weight of anything loaded behind the rear axle of the vehicle. A trailer's tongue weight rating is usually between 10 and 15 percent of the trailer weight; if the tongue weight of the trailer when ready to tow is between 350 and 525 pounds and you are not carrying any additional cargo... view full answer...
I recommend using the etrailer Trailer Hitch Receiver # e83KR for carrying a bike rack on your 2012 Dodge Nitro because it has a matte black finish to help match any black trim on your vehicle while also helping to protect it from scratches from road debris.
When it comes to a bike rack I recommend the RockyMounts HighNoon FC Bike Rack for 2 Bikes # RKY67RR because it can accommodate heavier bikes and it uses wheel hooks to secure any bike without a front fender, but if your bike does... view full answer...
For your 2007 Dodge Nitro, you'd want the part Curt # 13334 which is a confirmed fit. I attached an install video for this hitch for you to check out as well.
If you need trailer wiring you'd also need the # 118554.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with... view full answer...
The Curt trailer hitch, # 13334, fits the 2007 to 2012 Dodge Nitro, so it will fit your 2008. I have included a link to the installation instructions and a video for you on the 2008 model.
There is one more hitch that fits your Dodge Nitro, the etrailer hitch # e83KR. These hitches are nearly identical except the # 13334 has a glossy black finish and the # e83KR has a matte black finish.
If you plan on doing some towing, I recommend the etrailer ball mount kit, # 989900. It comes with... view full answer...
There are several factors that determine the towing capacity or weight carrying capacity of vehicles. Many times they may appear very similar but due to the frame, transmission or engine, the towing capacity can vary by quite a lot.
My research revealed that the trailer hitches we offer for the Jeep Liberty were either Class ll or Class lll and have either the same or lower weight capacity as the hitches we offer for your Dodge Nitro. I would strongly recommend using a hitch that is designed... view full answer...
Yes, the Curt Mobile Echo Brake Controller part # C51180 is compatible with electric over hydraulic trailer brakes. I attached a review video for this controller for you to check out as well. view full answer...
The Curt trailer hitch # 13334 is a confirmed fit for your 2011 Dodge Nitro but it does not include the trailer wiring harness so you would need to purchase that separately. The best options is the Tekonsha kit part # 118554 which is a confirmed custom fit. This is our most reliable brand and it would work well. I attached an install video for this for you to check out too.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball... view full answer...
Go To Results