Yes, the Malone HandiRack Universal Fit Roof Rack # MPG452 that you referenced is a confirmed fit for the roof of your 2017 Chevy Spark as it fits all vehicles with naked roofs basically. view full answer...
In order to add electric brakes to a Stand-Up EZ Haul Car Tow Dolly you will need to use the Electric Trailer Brake Kit part # AKEBRK-35, the Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K, and the Trailer Wiring 7-Way Upgrade Kit part # HS381-9000 but that's all. view full answer...
The first thing you need to flat tow your 2015 Chevy Spark with a manual transmission is a base plate kit like the part # 523174-1 which is a confirmed fit for your vehicle.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety... view full answer...
For flat towing setups like yours we have dual hitch adapters like part # RM-077-2 which will allow you to flat tow with the bottom hitch opening and then carry a hitch accessory like your scooter carrier with the top one. This has a tongue weight capacity of 400 lbs too. This would be the best option we have. view full answer...
The Rhino-Rack Roof Rack fits your 2019 Chevrolet Spark with a naked roof. The roof rack includes: Rhino-Rack Vortex Aero Crossbars # RRVA106B-2, Rhino-Rack 2500 Series Legs # RRRLKVA and Custom DK Fit Kit # DK465. This roof rack has a weight capacity of 165 lbs.
If you have raised side rails that run front to back you can use the Yakima Roof Rack with Yakima CoreBar Crossbars # Y00421 and TimberLine Towers for Yakima Crossbars # Y33TR. This system has a weight capacity of 220 lbs.
Even... view full answer...
The 2018 Chevy Spark EV has the active air shutters so the Blue Ox base plate kit part # BX1725 will work well for you.
For a tow bar the Blue Ox part # BX7380 would be a great option that would fit and work well too.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way... view full answer...
All of the base plates from other manufacturers, Roadmaster and Blue Ox, carry forward from the 2017 to the 2018 Chevy Spark so we can glean from that information that the Demco base plates # DM9519326 will also fit. Please note this fit is for models with a manual transmission and without active air shutters.
For a compatible tow bar I recommend the Commander # DM9511012. This is a non-binding tow bar which means that you won't have to be perfectly straight or level to hook up or unhook... view full answer...
Chevy does not recommend flat towing the automatic transmission versions of the 2014 Chevy Spark which is why our base plate kits for your vehicle only call out the manual transmission models.
So you'd have to go with a tow dolly like the # DM9713045 from Demco for your vehicle. view full answer...
While we do have hitches that fit the 2013 Chevy Spark like with the Curt part # C11334 we do not have anything that fits the R models of the 2013 Volkswagen Golf like you noticed. view full answer...
I did some research on your 2014 Chevrolet Spark and per the owner's manual it states that no more than 110 lbs can be carried on the roof or the vehicle could suffer damage. Carrying 2 kayaks would not be an option because the weight on the roof with the kayaks, roof rack, and kayak carrier would exceed the roof weight limit.
If carrying one kayak is an option for you I recommend the Rhino-Rack ROC25 Roof Rack, part # RR22RR. This roof rack has quiet aerodynamic black crossbars and features... view full answer...
As long as you have a hitch installed on your 2019 Chevy Spark like the Curt part # C11433 you can install and use the Kuat Transfer part # KU74FR that you referenced. This Curt hitch stabilizer strap # 18050 when carrying a non-supported load like a bike rack. view full answer...
If you were looking for the most economical way to tow your 2015 Chevy Spark I think I have your best option although it's not quite a flat towing setup. Since flat towing setups are pretty expensive (even on the cheap side) the best option when money is concerned is a tow dolly like the Roadmaster Tow Dolly # RM-2050-1. It's a one time cost up-front that while might seem high is still less expensive than the most inexpensive flat towing setup and you don't have to pay for anything to be... view full answer...
The Demco Tow Bar Storage Cover # DM9523042 is a confirmed fit for the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR that you mentioned. view full answer...
You can use the wiring you have now since it basically is just the running light circuit ran to the area for the camera you can use essentially any camera setup but we don't have anything that uses the same connector.
You can use the Furrion Vision S part # FOS43TASF which has the best reception and overall performance. view full answer...
Base plate manufacturers have not yet created base plates for the 2019 Chevy Spark but I am sure they will be coming out in the near future. I checked the owner's manual for the 2019 models and only models with a manual transmission can be flat towed. If you have an automatic transmission then you can dolly tow the Spark using a tow dolly, # RM-2050-1 or # RM-2000-1. You can also dolly tow models with the manual transmission if you want.
I have linked videos of the tow dollies for you.... view full answer...
For a base plate kit confirmed to fit your 2014 Chevy Spark that would also work with the tow bar part # RM-501 that you referenced you would want the part # 523174-1. This base plate has been confirmed to work with all Roadmaster tow bars.
In addition to the base plates and tow bar, you will also need safety cables, lighting, and supplemental braking to flat tow your vehicle. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting... view full answer...
We have everything you need to set up your 2017 Chevrolet Spark to be flat towed behind an RV. For this you will need a base plate kit, a tow bar, a safety cable set, lighting solution and a supplemental braking system.
Starting with the base plates, I recommend the Roadmaster EZ4 Base Plate Kit # RM-523185-4. These base plates are confirmed to fit your Chevy Spark and will install on its frame to provide attachment points for a tow bar. This kit features a nice hidden bracket design... view full answer...
The trailer hitch I recommend for a 2014 Chevrolet Spark is the Curt Trailer Hitch Receiver part # C11334. This trailer hitch has a bolt-on fit and it's the only option for this vehicle with no drilling required. It will work on models without the ground effects. It can be used for towing (if applicable) or hitch mounted bike racks and cargo carriers. view full answer...
Go To Results