The Camco RV and Enclosed Trailer Roof Vent Cover # CAM40453 is a cover only, and it is designed and sized to work with standard 14 x 14 trailer and RV roof vents. This cover allows you to keep the vent open at all times, even when traveling down the road and when it is raining.
The smoke-color vent cover measures 18-1/2 long x 18 wide x 8-1/2 high and it includes both a removable screen and mounting hardware. view full answer...
The Atwood Air Command Rooftop RV Air Conditioner, # AT15033-22, does include a roof sealing gasket.
The Air Command will include all the needed parts to install the A/C unit in a trailer's existing roof A/C hole or a unit that is installing a A/C unit for the first time. view full answer...
The LaSalle Bristol XTRM PVC RV Roof Membrane # 3441700534142711435 ships as a roll like what you see in our photos and the linked installation video. view full answer...
The Alpha Systems Superflex TPO RV Roof Membrane # AL23CV comes on a roll. This can be seen in the photo below as well as the photos on the product page. This is also available in white # AL42CV, gray # AL75CV, and almond # AL33CV. view full answer...
Yes, the Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40148 does come with the mounting brackets, which are rust-resistant. This lid fits 14" x 14" pre-2008 Ventline and post-1994 Elixir roof vents. I've added a link to a video review of this part for you to take a look at as well. view full answer...
The MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat # MA00-04002K you were looking at comes with 2 butt-connectors for you to be able to splice your vent's wiring to the wiring in your RV. You will want a good pair of crimps # PTW30764 to crimp the ends of the butt-connectors. view full answer...
The Advent Air Rooftop RV Air Conditioner # ACM135 includes the needed thick foam gasket to create a tight seal with the RV's roof. You will not need to obtain this separately.
I have attached a short video demonstration on this unit that you can check out as well. The installer briefly points this gasket out at about the 50 second mark. view full answer...
Yes, the hinged brackets along with the self-tapping, stainless steel screws are included with the MaxxAir II RV Trailer Roof Vent Cover # MA76JR. This is everything you will need for installation. view full answer...
No, the Replacement Lid for Jensen RV Roof Vent # CAM40160 does not include the pin. The brackets that the pin installs into though are already pre assembled onto the cover and have integrated rust-resistant brackets. view full answer...
The color of the Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40148 is actually smoke so yes, it does come in smoke color. For visual verification please take a look at the video I've linked for you. view full answer...
The Fan-Tastic Roof vent fan you mentioned includes the mounting hardware, but no sealant. I'd recommend using the TemPro Silicone Sealant, part # 0160297 to provide a strong but flexible seal between the vent and the roof of your RV or trailer. view full answer...
The Alpha Systems Superflex TPO RV Roof Membrane - Beige - 45' x 9-1/2' # AL55CV is the membrane only so it's basically the "shingles" to a house.
To complete the installation you also need the Alpha Systems Installation Kit # AL24UV and your tools like paint rollers, pans, and a utility knife. This installation kit comes with all of the adhesive and sealant you need to complete your project and get the membrane installed properly.
Attached is a full-on installation video of a roof membrane... view full answer...
The Aluminum vent, # RV-626-062, comes with the vent itself, built-in screen, and a gasket, but not the garnish.
The enclosed trailer vent, # 9106-2756, comes with the vent assembly itself, the black garnish that can be trimmed if you have a thin roof, a built-in screen, and a gasket. If you like the look of the first one, you could always paint this black vent to the color you wanted. view full answer...
The 5-5/16" Ceiling Garnish for Ventline Roof Vent # VA0445-37 you referenced would have to be purchased separately since the Ventline Ventadome Trailer Roof Vent # V2094SP-28 only comes packaged together with 2-1/8" garnish # VA0445-26. view full answer...
I checked with Atwood and the gasket is included with the Air Command AC unit # AT15033-22. If for any reason you gasket was ever damaged you could replace it with part # A10-1414. view full answer...
Advent Air Rooftop RV Air Conditioner # ACM135B is just the outside part of the air conditioner. For the inside, ceiling portion you could use # ACDB. view full answer...
Yes, the Rhino-Rack part # Y02-480B is a complete adjustable track-mount roof rack system that includes a pair of tracks, four leg assemblies, two aero-style crossbars and locks. This is intended primarily for applications on camper shells, hard tonneau covers, or hardtop resin roofs as found on some RVs.
This rack setup could also be installed on the roof of a vehicle such as your 2012 Chevrolet Silverado but we have other custom roof rack options that will not require drilling into the... view full answer...
Yes, the Stromberg Carlson RV Exterior Ladder # LA-401 comes with 4 supports (often called stand-offs) as well as 2 hinges (use of which is optional) and mounting hardware, all of which is shown in the linked photo.
The legs of the ladder can be trimmed down with a hacksaw or tube cutter. When you are installing mounting brackets and support pegs, make certain that all screws are fastened to the RV's blocking or subframe on roof, not just the outer skin. If you are uncertain if your RV... view full answer...
The only color of butyl tape available for the Camco RV Vent Installation Kit # CAM25013 would be white. This kit will work to replace or install a vent on your trailer's rubber roof or sidewall. I've added a link to a video review of this product for you to take a look at. view full answer...