The TruXedo TonneauMate Truck Bed Toolbox part # TX1117416-88 which is a fit for a 2011 Chevrolet Silverado with 5-1/2' bed does not come with a tonneau cover, just the toolbox. For a tonneau cover, I recommend the TruXedo TruXport Soft, Roll-Up Tonneau Cover part # TX270601 but I have also attached a full list of options below. view full answer...
There is an option for a locking tonneau cover for your 2018 Honda Ridgeline, from Retrax:
- RetraxONE MX Hard Tonneau Cover # RT60502
The RetraxONE # RT60502 has a locking handle and allows you to lock the cover at any point along your bed. It is also a hard cover, which combines with the lock to provide the best possible security for your Ridgeline. view full answer...
Yes, a lock is included on the RetraxONE XR tonneau covers for your 2018 Chevy Colorado; the correct fit for your truck depends on if you have a 5 foot or 6 foot bed:
- 5 Foot Bed: RetraxONE XR Hard Tonneau Cover # RTT-60454
- 6 Foot Bed: RetraxONE XR Hard Tonneau Cover # RTT-60453
The RetraxONE has a locking handle near the end of the cover towards the tailgate, and is concealed with a weather-guard lid so it is safe from the elements. view full answer...
The Replacement Rear Header for TruXedo TruXport Roll-up Tonneau Cover # TX246901-REARHEADER does not include the rear latches, it is just the replacement rear header piece.
If your tonneau cover was manufactured after April 2011, you can use the Replacement Dual Latch Kit for TruXedo TruXport Soft, Roll-Up Tonneau Covers # TX1117755 for replacement latches.
If your cover was manufactured before then, your only option is a full cover replacement. view full answer...
Yes, the Access Original tonneau cover does indeed come with support beams (pipes) that go across the width of cover in order to add support. The correct fit for this tonneau on your 2021 Toyota Tundra with a 6-1/2 foot bed and the Deck Rail System is the following part number:
- Access Original Soft, Roll-Up Tonneau Cover # 834532009442
The support beams will help ensure the cover is snug to your Tundra, as will the XT-Dial that allows you to tighten the cover with just the turn of a... view full answer...
Yes the Replacement Cover for TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX546601-CVR that you referenced does have velcro on the bottom of the tarp. It also has velcro for the bows as well. view full answer...
Everything is indeed included with the Rhino-Rack system with tracks so you can mount it on your hard tonneau cover:
- Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount # Y02-480B
The one thing I do highly recommend is to contact the manufacturer of the tonneau though in order to ensure its weight capacity, as we want you to be safe!
The only thing not available are replacement end caps for the tracks. Otherwise, I have gone ahead and linked the installation instructions... view full answer...
The BAKFlip MX4 Hard Tonneau Cover # BAK48602 does not come with a separate lock with a key but it still offers security for your 2019 Honda Ridgeline. The reason for this is when the panels are down they are latched into place on the inside so as long as your tailgate is locked your '19 Ridgeline will have a completely secure bed.
If your '19 Ridgeline does not have a lock I strongly recommend adding the Pop & Lock Custom Tailgate Lock # PAL8600. I have added a link to a video of this... view full answer...
You assume correctly. The # TX5806-COVER replacement cover for the Truxedo Lo Pro QT Soft Roll-Up Tonneau Cover does include the loop portion of the Velcro fastener. It's stitched to the cover. view full answer...
Yes, the TruXedo TruXport Soft Roll-Up Tonneau Cover # TX250101 for your 2000 Ford Ranger with 6-foot bed is a complete tonneau cover system that includes rails and all components required to install it on your Ranger.
You can check out the video I linked for you that shows this cover's features and the process of installing it. view full answer...
The BAKFlip G2 Hard Tonneau Cover part # BAK26410T which is a fit for a 2018 Toyota Tundra with 6-1/2' bed comes with everything you need for installation except for a 9/16" wrench/socket. I have attached a photo with all of the kit components below. There is also a supplemental kit which allows you to attach to the factory deck rail system which is not shown. view full answer...
Yes, the Replacement Cover for TruXedo Lo Pro Soft Roll-up Tonneau Covers like part # TX546601-CVR all have the hook and loop fasteners sewn in. view full answer...
The Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A61409 does come with a weather seal that goes in front of the toolbox and there is also a weather seal that goes behind the toolbox to prevent water, snow, and dirt from entering the truck bed. You do not need to buy anything else for installation, as everything including the seals will be included with this tonneau cover. I attached a demonstration video for more insight on this cover. view full answer...
I checked and the MX4 we carry for your 2016 Ford F-150 with a 5-1/2 foot bed is the updated version, the BAKFlip MX4 Hard Tonneau Cover # BAK48329.
Ordering this will get you the latest version for your F-150. view full answer...
The rear buklhead seal is not included with the Replacement Tarp for TruXedo TruXport Soft Tonneau Cover part # TX2981-CVR, it's separate and can be obtained using the Replacement Rear Header Seal for TruXedo TruXport Tonneau Cover part # TX1705227. The seal is sold by the foot so just measure your bed width and order accordingly. view full answer...
The BAKFlip MX4 Hard Tonneau Cover # BAK448227 that fits your new-body style 2019 Ram 1500 with a 5-1/2 foot bed is the latest version of this tonneau cover.
What it actually has are panels that latch in place automatically when they are lowered, which is what I believe you were referring to. This means when you lock the tailgate on your '19 Ram you will have a secure truck bed to keep its contents safe.
The MX4 is a complete no-drill installation which is great for your truck; it will... view full answer...
The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5755 includes the brackets, uprights, and bars, to install the OverHaul HD on the rails of your truck bed. These parts are for the installation of the ladder rack and do not include any hardware for the tonneau cover itself. With the hardware provided, it allows you to install the OverHaul HD (which is compatible with the Retrax XR tonneau cover). I went ahead and attached a picture of all the hardware that... view full answer...
Yes, the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1940 comes with the snaps installed. If you just need replacement snaps we also have the # EX7028. The snap studs # EX2128 are also available. view full answer...
Extang Trifecta Signature 2.0 Soft Tonneau Cover # EX94445 comes with everything needed to install the cover on your 2016 Chevy Silverado 1500 with the 5-1/2-ish foot bed. No other brackets are needed. view full answer...