The Swagman XC 2-Bike Rack for 1-1/4" and 2" Trailer Hitches # S64650 is a great platform bike option for your 2003 Subaru Forester, so long as it is already equipped with a trailer hitch receiver, like the Draw-Tite Trailer Hitch Receiver # 36311, designed to fit the frame of your Forester.
To use the bike rack, you do not need any extra parts. Everything you need to install it on a trailer hitch is included with part # S64650.
The only time you'll need to use a ball mount, is for trailer... view full answer...
The Replacement 3-Wing Hand Knob # 753-0745 that you referenced is sold individually. The one customer who had a bag of these delivered had ordered several of them. view full answer...
Trailer hitch # 76227 does not come with hardware because it uses nuts already on the 2017 Subaru Outback Wagon. The bumper beam on this vehicle fits over 8 studs in the vehicle frame and is held there with 8 matching nuts. This hitch will be sandwiched between the bumper beam and the end plate where it mounts using the same studs and nuts. I have linked the instructions for you to illustrate this.
The review you mentioned is actually referring to EcoHitch # 306-X7601 which comes with... view full answer...
The HandRoll Carrier # Y04082 that you referenced is actually just the part of the carrier that has the wheels. To complete the carrier you also need some saddles like the DeckHand # Y04083. This combination is available for your 2019 Subaru Outback Wagon in the kit # Y04083-04082 and is compatible with round, square, or aero-style crossbars.
To add locks to either setup you need the 4 lock core set # Y07204. view full answer...
The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red).
The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs... view full answer...
For Curt trailer hitch # C12038 you will get the trailer hitch itself and the hardware needed to install it. The other parts you need depend on what you're going to use the htich for.
If you're going to be carrying a cargo carrier or bike rack you also need a support strap # 18050 per Curt's warranty.
If you plan on towing a trailer you need to add ball mount # C45503 along with the properly sized ball and the wiring. Those items are not included with the hitch. For a 1-7/8 inch ball... view full answer...
The Yakima RidgeBack bike carrier # Y02457 has a lock built into the anti-rattle knob. When the knob is tightened and then locked it cannot be take out of the hitch. I have included a link to a video review of this carrier for you. view full answer...
Yes, the EcoHitch Stealth Trailer Hitch Receiver part # 306-X7365 which is a fit for a 2019 Subaru Crosstrek does come with hardware and everything you need for installation expect for tools. It's a well made hidden option with removable receiver tube. view full answer...
The Draw-Tite Class I Trailer Hitch, # DT24959, does not come with a ball mount. You will need to order one. To add a hitch ball, you will first want to determine the size of hitch ball that your trailer requires. You can use a 1-7/8 inch hitch ball, # 19256, or a 2 inch hitch ball, # 19258.
Please note, this hitch will fit your 2008 Subaru Impreza as long as it is the hatchback model with single exhaust. This hitch will not fit the WRX STi models.
If your Impreza is a sedan, not STi... view full answer...
The size bolt lead that comes with the Draw Tite hitch part # 76271 is 7/16 inch so the correct part number you'd need for more would be the # C58410. view full answer...
There are 2 Curt trailer hitch receivers that fit your 2018 Subaru Outback; the Class II, part # C12136 and the Class III, part # C13206. Both require the fishwire technique for installation and both also include 2 fishwires for this.
I've also attached install videos and the install details of both hitches. view full answer...
All Konig tire chains come in a set of 2 so you will be able to install the Konig Self-Tensioning, Low-Pro Snow Tire Chains - Easy Fit CU9 # TH04115104 on either your front or rear tires. I recommend checking out your copy of the owner's manual for your vehicle to make sure you install and use these in accordance with what the vehicle manufacturer says to do. view full answer...
Yes, the Timbren Axle-Less Trailer Suspension System # A35RD545E does include the actual brake assemblies as well as the hub and drum assemblies. The Timbren systems are great if you're looking for a better, independent suspension for the trailer or more ground clearance beneath the trailer. view full answer...
The Tourney Transom Saver # 315-FXK comes with a 2 year manufacturer's limited warranty that will cover any breakage because of faulty craftsmanship. This particular unit is made from a high quality and high strength aluminum that helps resist corrosion, which would be a primary cause of most malfunctions. I'll also say that from what I was able to find, I haven't found any specific instances of this transom saver malfunctioning for any of our customers. For peace of mind, it might help... view full answer...
The Replacement Trunnion Bar Kit # C17335 is sold as a single item. You will need 2 of them to replace both spring bars on a Curt short-arm weight distribution system. view full answer...
The Yakima SKS lock cores, # Y07202, includes the two lock cores, 2 regular keys that match the locks, and a change key to remove/install lock cores. I have included a link to a video that, in part, shows how it all works. The video is on a bike rack but the same process for installing the locks will apply to the cargo box. view full answer...
The Rhino Rack roof rack part # RR37XR comes with everything needed to install on your 2015 Subaru Legacy. The door clamps and fit kit are included. Sometimes we offer the roof racks with the fit kits split off as a separate part, but for this rack the fit kit comes with it. view full answer...
We can piece together a Malone Lowbed trailer by first starting with the part # MPG464-LB and then a single bunk kit part # MPG561 and then the spare kit part # MPG465 and you'd be set. There isn't a kit with just the parts you are looking for available at this time. view full answer...
The grease cap that comes with hub and drum assembly # 8-201-5UC3 is Grease Cap - 2.446" Outer Diameter - 1-5/16" Tall - Drive In # F001520. view full answer...